Re: 77 yellow gmc swb
4 Attachment(s)
Yep Budd its a 160mph speedo ! I like the knobs they go with the old school look I got goin on , the twist style would give a newer retro fit look , just not what I'm lookin for , heres my dash panel getting closer to done , got the top of the steering wheel cover welded on and the bottom all formed up,
|
Re: 77 yellow gmc swb
Everything looks really nice. I can't wait to see how the gauge cluster turns out.
Posted via Mobile Device |
Re: 77 yellow gmc swb
nice job on the knobs , you could glue rubber O-rings in the grooves if they end up beeing too slick to pull with greasy hands
|
Re: 77 yellow gmc swb
Thanks guys , I have had some o rings on them once , it looked good ,anyway hopefully no greasy hand will be in this truck !
|
Re: 77 yellow gmc swb
2 Attachment(s)
I got the steering wheel cover on the dash panel welded up , got it all screwed on, also drew some gauges on !
|
Re: 77 yellow gmc swb
Quote:
Posted via Mobile Device |
Re: 77 yellow gmc swb
Read through the thread and the work you are doing is simply astounding. Very thoughtful well executed modifications all around. I am glad to see the rear bumper filler panel you made, I had thought of doing the same thing except using a roll pan and making clearances or pass through's for the bumper brackets.. It does really complete the rear of the truck and it was a factory component on my first ride a 89 s10 blazer. Awesome progress and great fab skills!
|
Re: 77 yellow gmc swb
Nice work man keep it up....
|
Re: 77 yellow gmc swb
4 Attachment(s)
Thanks guys , I just tried to make a plan and stick with it , just wanted a simple clean build ! so the digital flush mount gauges werent workin so I cut all the holes in for the autometers , also cut the hole for the heater, air ride switches and cut a notch in for the air gauge , put it all together to see how it looked , now I see I need to remove more of the dash support tomorrow ,
|
Re: 77 yellow gmc swb
Very nice, love it. Keep up the good work
|
Re: 77 yellow gmc swb
wow very good work!
|
Re: 77 yellow gmc swb
i would like to have some of them knobs for my truck! looks good
|
Re: 77 yellow gmc swb
1 Attachment(s)
Thanks , next up was to make a shift indicator switch ?? something else I have to do to get the dash panel done , goin to take a hunk of plastic and rivet a wire to the back side at all 6 shift points ,add a bracket I can weld to the shift lever with a hunk of copper to use as a contact thats grounded,run eash of the 6 riveted wired to the 6 lights on the dash ,so tonight I made some brackets and mounted with the pan bolts and use some plastic and duct tape to moch it up, I think I may even work ! heres a pic taken at the trans shift point to help understand
|
Re: 77 yellow gmc swb
maibe you can use a stepperswitch instead http://media.conrad.nl/m/7000_7999/7..._00_FB.EPS.jpg, seen someone use that a while back with a 7 segment led http://www.futurlec.com/Pictures/Sin...ED_Display.jpg it showed P n R D 1 2 3
|
Re: 77 yellow gmc swb
4 Attachment(s)
Yep I coulda used 1 of them maybe but I made this 1 today and added a bracket to the shift lever with a brass tab , hope to get it wired up to the dash tomorrow ,
|
Re: 77 yellow gmc swb
Ok got the switch all hooked up, it even works! here a short video
|
Re: 77 yellow gmc swb
very cool!
|
Re: 77 yellow gmc swb
I can't believe you just fabbed that up out of nothing!!! That's awesome!!
|
Re: 77 yellow gmc swb
1 Attachment(s)
Thanks , I just knew just what I needed and just tried it , it went way easier than I woulda thought ,
Got the dash panel just about done, after a couple trys I finally got the headlight switch hole in the right place the wiper slot fit the first time! just need to weld in the area where the air gauge will go and tune it up for paint, |
Re: 77 yellow gmc swb
Necessity (or a hot rodders wants) is the mother of invention!
Awesome fab job on all of it! |
Re: 77 yellow gmc swb
Yo the mannn
|
Re: 77 yellow gmc swb
1 Attachment(s)
got the air gauge area tuned up on the panel and was able to get everything sanded down and put a couple coats of primer on ,
|
Re: 77 yellow gmc swb
looking good 73.....
|
Re: 77 yellow gmc swb
wow! that is realy looking very nice!
|
Re: 77 yellow gmc swb
3 Attachment(s)
Thanks guys, tonight I was able to do some more sanding and aslo got the mounts for the heater switches drilled and tapped hope top get the holes drilled for all the led lights tomorrow anda bit more sanding ,then it will be ready for paint finally !
|
All times are GMT -4. The time now is 04:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com