The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   67 long box (https://67-72chevytrucks.com/vboard/showthread.php?t=677417)

Metaldoc 11-22-2015 01:21 AM

Re: 67 long box
 
3 Attachment(s)
Spent a couple of hours in the blast cabinet on my hinges, a bit of paint and brand new. Upgrading the wiring to add a new panel. My dash didn't fair so well in the southern heat, recovering that and the door panels in black and adding black visors. Taking some blue out, add more black and silver.

Metaldoc 12-04-2015 03:35 PM

Re: 67 long box
 
1 Attachment(s)
Been down with migraines again, on average now 5 to 7 a day so not much happening in the shop. I'm going to a new doc. in the new year to see about an electrical implant to try and stop them. Damn headaches are messing up my shop time. I did find the rest of my wiring and it doesn't look to bad. It's hard to concentrate on detailed stuff with a headache. I just keep going and push on, I want a driver not a project waiting to be driven. How can you tell I've a couple of crappy weeks.

Advanced Design 12-04-2015 06:35 PM

Re: 67 long box
 
Sorry to hear about your headaches! Wiring would be very tough to do with a migrane.
Hopefully the new Doc will help.

Metaldoc 12-24-2015 02:30 PM

Re: 67 long box
 
A Merry Christmas to all my fellow builders and may Santa bring ya some new toys or parts for the build.
HO HO HO Derek.

cleanfreak 01-04-2016 07:52 AM

Re: 67 long box
 
Just went thru the build quickly , very nice! I have a friend out your way , wanting some rocker work done on a real nice 68 swb , any interest in a little side work?

Metaldoc 01-04-2016 10:13 PM

Re: 67 long box
 
Quote:

Originally Posted by cleanfreak (Post 7434158)
Just went thru the build quickly , very nice! I have a friend out your way , wanting some rocker work done on a real nice 68 swb , any interest in a little side work?

Thanks I try not to take on other work due to health problems, but I'd be willing to talk to him or work him through the job. My shop isn't big enough to hold another truck either. Some times the rocker repair can be more involved than what's seen on the outside.
Derek

cleanfreak 01-04-2016 11:17 PM

Re: 67 long box
 
Quote:

Originally Posted by Metaldoc (Post 7435222)
Thanks I try not to take on other work due to health problems, but I'd be willing to talk to him or work him through the job. My shop isn't big enough to hold another truck either. Some times the rocker repair can be more involved than what's seen on the outside.
Derek

No problem , thought I would ask. He has asked me , just a little to busy with my own fleet, and it's hard to find metal work of your quality up here.

Metaldoc 01-05-2016 11:57 PM

Re: 67 long box
 
2 Attachment(s)
back at the wiring after a month sick, got the new used fuse block to add in. Did the headlight relays, alternator switch to internal, HEI wired, added another 10ga wire from the battery to more interior power. nice box of spare wire going on from old projects.

Metaldoc 01-17-2016 12:35 AM

Re: 67 long box
 
2 Attachment(s)
adding in some wires, taming the hood seal to fit, I can't believe the change it's under gone

mooseknuckles 01-17-2016 07:26 PM

Re: 67 long box
 
looks nice!

Metaldoc 01-18-2016 09:10 PM

Re: 67 long box
 
2 Attachment(s)
repurposed the voltage reg. to a breaker holder. weather proof and looks stock. This will replace the fuseable links from the starter.

Metaldoc 01-18-2016 10:04 PM

Re: 67 long box
 
1 Attachment(s)
I tucked the wires across the floor edge and into it.

Metaldoc 01-19-2016 02:07 PM

Re: 67 long box
 
2 Attachment(s)
found bulkheads for the washer hoses to move them off the firewall. Model airplane fuel tank fittings.

Sicksty8 01-19-2016 06:05 PM

Re: 67 long box
 
That's a great idea with rc fittings! I wanted to clean up the routing as well. It's just weird that gm routed it so messy from the factory.

Metaldoc 01-19-2016 09:40 PM

Re: 67 long box
 
1 Attachment(s)
just add the newer fuse block and I'm feeling happy. Yup RC plane parts, I've taken most the clutter off the firewall.

Metaldoc 01-21-2016 02:57 PM

Re: 67 long box
 
3 Attachment(s)
Taking a break from wiring and put the washer through the cowl from the inside. Now to use the holes from the washer hoses on the firewall by adding two more holes to make 4 identical location holes to light up the engine bay. LED spot lighting. Started prepping for vintage air install to add wiring to my harness.

Metaldoc 01-21-2016 10:53 PM

Re: 67 long box
 
2 Attachment(s)
almost ready to install again. too many wires, still have the alarm, electric door locks with remote open, power window wiring, stereo, usb charge ports. Now it seems like I'm just starting to wire. Sending unit came in and installed.

Sicksty8 01-21-2016 10:59 PM

Re: 67 long box
 
Quote:

Originally Posted by Metaldoc (Post 7456487)
almost ready to install again. too many wires, still have the alarm, electric door locks with remote open, power window wiring, stereo, usb charge ports. Now it seems like I'm just starting to wire. Sending unit came in and installed.

Wondering where the fuseblock is from. I need one myself

Metaldoc 01-21-2016 11:45 PM

Re: 67 long box
 
Quote:

Originally Posted by Sicksty8 (Post 7456492)
Wondering where the fuseblock is from. I need one myself

1980-87 chevy truck, van, monte, camero, most gm of those years. T
his one is 84 truck

Metaldoc 01-22-2016 05:57 PM

Re: 67 long box
 
2 Attachment(s)
LED lights turned out perfect

deejaaa1 01-23-2016 01:10 AM

Re: 67 long box
 
looking good.

Metaldoc 01-25-2016 06:15 PM

Re: 67 long box
 
1 Attachment(s)
power window and lock relays controlled by momentary push button switches. No rocker switches, something different. Diodes to stop reverse ground flow to relays from alarm output and button to relay trigger.

Vintage Windmills 01-25-2016 10:50 PM

Re: 67 long box
 
Nice work! I really like how you are repurposing the voltage regulator

Metaldoc 01-25-2016 11:43 PM

Re: 67 long box
 
Quote:

Originally Posted by deejaaa1 (Post 7457790)
looking good.

Quote:

Originally Posted by Vintage Windmills (Post 7461627)
Nice work! I really like how you are repurposing the voltage regulator

Thanks, that reg box holds the two breakers perfect and still looks like it could have been there from factory.

Low Elco 01-26-2016 02:20 PM

Re: 67 long box
 
Nice work- All of this electrical, I'd have thrown up and passed out by now.


All times are GMT -4. The time now is 07:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com