Re: Starting a 52 Chevy 3100 Project.
 

X2, and I'm one those pics will help. Thanks.

Re: Starting a 52 Chevy 3100 Project.
 

Thanks. It's an early 90 Chevy c1500 pedal one bolt goes on the bottom hinge the top I drilled another hole in the emergency brake and behind the hinge outside and the front was welded on. You could easily make it bolt by adding the plate I added behind it
Someone had cut speaker holes but I am leaving them as access holes to put in door pins for the dome light. Also bought the release cable at the auto parts store and it bolted directly to it without modification.

Re: Starting a 52 Chevy 3100 Project.
 

Very nice work man!! Just picked me up a 51 and weighing out my options. Thanks for the inspiration 28TudorAZ!!!

Re: Starting a 52 Chevy 3100 Project.
 

Thanks! I am coming up on 1 year in 2 months so I better get my butt in gear. I wanted to get finished in a year. Found these ad pictures the other day from when I bought it.

Re: Starting a 52 Chevy 3100 Project.
 

Built the gas pedal.

Re: Starting a 52 Chevy 3100 Project.
 

heyoooo!

Re: Starting a 52 Chevy 3100 Project.
 

Looking good.

Re: Starting a 52 Chevy 3100 Project.
 

Looks good, what insulation did you use behind the seat?

Re: Starting a 52 Chevy 3100 Project.
 

Thank guys. Any progress is good.


I used the $15 rolls from Lowe's.

Re: Starting a 52 Chevy 3100 Project.
 

Can you post a link to the $15 roll from Lowes?

Thanks.

Re: Starting a 52 Chevy 3100 Project.
 

I am doing the whole inside including ceiling and doors with it. I want it as airtight as possible.


https://www.lowes.com/pd/Peel-Seal-I...ashing/1018733

Re: Starting a 52 Chevy 3100 Project.
 

I used some of this on my truck by other peoples suggestions.

https://www.lowes.ca/metal-duct/fros...erm=frost-king

Re: Starting a 52 Chevy 3100 Project.
 

Thanks guys. Greatly appreciated.

Wade

Re: Starting a 52 Chevy 3100 Project.
 

Seat and seat belts put in.

Re: Starting a 52 Chevy 3100 Project.
 

Nice. What is the seat out of.

Re: Starting a 52 Chevy 3100 Project.
 

Are you doubling up on the sound deadener?

Re: Starting a 52 Chevy 3100 Project.
 

Early 90s chevy truck. Pick n pull. $50 reupholstered $350

Re: Starting a 52 Chevy 3100 Project.
 

I did on the carpet. Went with a carpet padding as well.

Re: Starting a 52 Chevy 3100 Project.
 

Finished the pastry work on the front of the cab and started routing the engine wiring. I plan on getting the font end back on in the next week.

Re: Starting a 52 Chevy 3100 Project.
 

Havent posted in a while. Making some progress. My dad is bringing the doors over at the end of the week. Hopefully get them painted and put on over the weekend. Then its wiring and fluids.

Re: Starting a 52 Chevy 3100 Project.
 

It is looking good.

Re: Starting a 52 Chevy 3100 Project.
 

Thank! Doors and front bumper arrived at my house yesterday. Built the battery box from the s10 one.

Re: Starting a 52 Chevy 3100 Project.
 

Did you do any type of stiffener on the inside of the firewall for the battery box?

Re: Starting a 52 Chevy 3100 Project.
 

The brace going down to the inner fender is welded to the bottom of the box. When I push on it the whole truck moves so it is really solid. Also where I shortened it on one side it has really thick angle iron.

Re: Starting a 52 Chevy 3100 Project.
 

I may steal this idea.

Thanks.