Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Fun. Not really.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Finished.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Gotta love it
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
One side complete.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Another
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Wheel position before.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Wheel position after.
|
Re: 1976 Square "Simple Green"
I will get a better pic of wheel position after today with some better light. But so far so good. I really really like the control arms. And I like how the coil seats and is held in place in the bottom. It has been a longtime that if I didn't jack the truck up a certain way the coils would kick out on me. This setup eliminates that tested that last night just for the hell of it. And my front shock angle is perfect with the new control arms also. More vertical now.
|
Re: 1976 Square "Simple Green"
Awesome! Looks so much better
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
I will fess up, I can't see the difference. Is the wheel better centered?
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Top shot. Still need to finish other side and take old sway bar off. Waiting on PB sway.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Fender comparison from top. This PB arms. You can see it has been pulled in.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Here is the way it was before. This is the passenger side whith the CPP arms.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Passenger side install.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
2.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
3.
|
Re: 1976 Square "Simple Green"
PB sure has nice looking parts. I would like to have some to just hang on the shop wall as art.
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Lol. Yes they sure do have a nice products they put out.
The guy that bought my CPP stuff came over yesterday and made the comment that his stuff wasn't as nice as the Porter stuff. Lol. |
Re: 1976 Square "Simple Green"
1 Attachment(s)
Finished. For now hahaha...
|
Re: 1976 Square "Simple Green"
I managed to get another 1" of drop in the front with the PB arms. Not because of the arms. I probably could get another .5" before any rubbing issue on fender lip. So as of now I am 7.5/8 drop. Really like the look. And the PB arms are top dawg.
|
Re: 1976 Square "Simple Green"
Let me see if I can make that sound better. The PB arms didn't give me the extra inch of drop. They gave me ability to drop it another 1". The arms being pulled in a inch resolved the issue with my wheels kissing the fender lips. So with that resolved I dropped it another inch. And all still is good. Didn't like how I made it sounds in the post above.
|
Re: 1976 Square "Simple Green"
Now I am waiting on the PB sway bar. The one they are making. And then a PB c notch. I think I am going PB crazy! Lol.
|
Re: 1976 Square "Simple Green"
And another thing I would like to add is Nate and Cousin Dave are Johnny on the spot with responses in emails. I really appreciate that as a customer. Plus they know what the hell they are talking about. I have called other suppliers/manufactures about stuff for our truck and most have no idea. Makes it nice to have someone in the trenches with us like PB. Lol off my soapbox.
|
Re: 1976 Square "Simple Green"
Beautiful truck and build.
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
So with the 1" narrow control arms I had to cut 1" off of the outer tie rod end. Well the sleeves are bottoming out. So I had to order some new shorter ones. Found some really nice QA1 sleeves.
|
Re: 1976 Square "Simple Green"
I got to take it out yesterday for a little cruise in. Took it up the parkway drives great! Handles better and turns better turns deeper. But I am so low I did scrape my new long tube headers. So the headers have to go. Which sucks cause they only have about 500 miles on them. I drove it pretty hard making sure everything was good. Everything is seated and nothing fell off so I must have put everything on right lol. I only put about 30 miles on the new setup. But this is the best setup I have had. Minus the headers rubbing the ground on dip. Very pleased and happy with PB arms.
|
Re: 1976 Square "Simple Green"
truck is amazing!!
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Wheres the new 1" additional drop pics?!
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
The pics above the one of the wheel shots that was before I had to go in a do a little customizing lol. When I got both sides done I had to go back and pull coils and do a little magic on them hahaha.
|
Re: 1976 Square "Simple Green"
Truck looks great!
Your thread should show everyone to go with Porterbuilt the FIRST time. |
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Some random pics.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Header about 2.5" from ground lol.
|
All times are GMT -4. The time now is 04:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com