Re: What did you do to your truck today? Chapter II
 

Nice to see someone from my neck of the woods. Never seen anyone else on here near me.

Thanks for flipping them for me. I didn't preview them before posting. Plus they look much better the correct way.

Re: What did you do to your truck today? Chapter II
 

I am in southern WV.....once I get my truck running, how about all members within 100 miles of us get together for lunch or some beers?

Today I bent a piece of 12-2 wire (just one wire, not all 3) into the shape of how I thought the in-cab fuel line should go. I then bent 3/8 inch tubing to match that. OMGosh it is nearly perfect! I think it would work BUT I have a kinked bend so I am going to try again tomorrow.

I also got the seat bolts coated with rust converter after cleaning in Evaporust for a couple of days.

http://i1313.photobucket.com/albums/...psruc6hygn.jpg

http://i1313.photobucket.com/albums/...psm2l1ifn5.jpg

I did come very close though......but for the kinked bend.

http://i1313.photobucket.com/albums/...psfqn1axip.jpg

Re: What did you do to your truck today? Chapter II
 

may be a while before I get my truck going... but hopefully I'll have the 62 Impala done by the end of the summer. If not I'd still be happy just to get together sometime.

Re: What did you do to your truck today? Chapter II
 

I bought this tach cluster before I even owned my truck. The air pressure gauge was from a big truck but I figured it would be cool if I ever wanted to bag the suspension and get it to work.
https://c1.staticflickr.com/9/8762/1...19cb1d42_c.jpg

As luck would have it, I wound up buying this 72 Cheyenne Super that someone had added aftermarket gauges to:
https://c2.staticflickr.com/8/7785/1...1c650b6e_c.jpg

Finally got around to installing the cluster in my truck, love having the factory tach. Still waiting on a new woodgrain appliqué to match the rest of the interior.
https://c4.staticflickr.com/8/7714/1...1a31317b_c.jpg

Here's the old cluster. I'm going to mount the water temp and oil pressure gauges under the dash.
https://c4.staticflickr.com/8/7720/1...d4f62fdd_c.jpg

Re: What did you do to your truck today? Chapter II
 

Got my Hella e-code lenses and 3800lm led's in.

Re: What did you do to your truck today? Chapter II
 

There is always time to have a beer or sandwich with a friend. :gi:

Re: What did you do to your truck today? Chapter II
 

That sounds like some plans are happening for the boys in the VA area. I'm in.

Re: What did you do to your truck today? Chapter II
 

Took out the 3OTT and installed a 2004r in the green 69. A little tinkering with the TV cable and she shifts nice. Next big project will be an engine transplant...

Re: What did you do to your truck today? Chapter II
 

Picked up my new registration and plates and the DMV.

Re: What did you do to your truck today? Chapter II
 

Hamjet, you're going to love that 2004r. I put one in my 71 behind a 454 with a 355 rear gear. 2k rpm @ 80 mph is awesome on the highway. Makes me want to branch out to neighboring states for swapmeets & shows.

Re: What did you do to your truck today? Chapter II
 

you're right about cruizing speed, its nice seeing the RPMs a lot lower..

Re: What did you do to your truck today? Chapter II
 

New to the forum! Will have lots of questions! I have my Grandpa's 1970 C-10 that he bought new, so I'm the second owner!

Last Saturday I got some used tires put on some rims I got off craig's list for $150 - I had to replace 2 rims that were so rusted they wouldn't hold air for more than a few minutes. It took me forever to find some rims that would fit that wouldn't break the bank!

http://i1183.photobucket.com/albums/...psyuovpbuj.jpg

http://i1183.photobucket.com/albums/...psj0ewfhfx.jpg

I was hoping that the tires that were on the rims were good enough to use to roll around to start working on the old girl, but no dice! I'm hoping to have her on the road in the next couple of weeks. I will start a thread to show progress and ask questions!

Re: What did you do to your truck today? Chapter II
 

Fuel lines adjusted, flared, and installed! I have the in-cab connected to the frame line but stopped as it was getting late. I'll install the fuel shutoff valve tomorrow.

*And get pics.

Re: What did you do to your truck today? Chapter II
 

Bolted up my seat, installed my new 3-point seat belts, got my bed bolted down to the frame, installed my new core support, installed my new inner fender on the pass. side, got all the gauges and lights working correctly, and hung my new plates.

Unfortunately, all that was done in my head without even touching the truck. Darn job and responsibilities.

Re: What did you do to your truck today? Chapter II
 

Well I pushed mine outside and finally got my cab off the frame to get started on the rust repair. Will take some more pics tomorrow.

Re: What did you do to your truck today? Chapter II
 

Ordered five NOS lenses. Almost done buying NOS parts for cosmetics (exterior/interior/under hood). Just 3-4 pieces to go. Four if I can find a better part. Other than that piece, everything I've bought is in mint order, and I've picked up maybe 45 pieces over the last two months. All but three pieces are mint/NOS, one was replaced, one may be replaced and the other is good enough (a.k.a., I'm not blowing $300 for a mint fan shroud).

That and the painter called. He's coming over Saturday to discuss me dropping the bed off at his place. Looks like I'll have a rear frame to do, real soon. Will be nice to do some real work on this. I have this coming over the next 2-3 years. Hopefully three.

1. Drop bed off with body dude.

2. Have someone remove welded parts from rear frame (5th wheel and receiver hitch support). Grind/sand to perfect.

3. I'll prep and paint the rear frame.

4. Arrange for someone to rebuild/install steering box.

5. Hire someone to help me remove parts for removing the cab. I'm green, but will ask to help and learn. Remove interior down to metal.

6. Body dude and I mark and dismantle the body and windows. Load body (including cab) up onto a trailer and drop it off at his place............May have to move this stuff twice before bringing it home for reassembly. Once at his place and once at the paint booth.

7. I'll dismantle the front end and rebuild. Hit all accessibles, frame etc. Engine compartment was done with the engine rebuild, so a "novice's frame off". I'll also restore the inner fenders also, motor mounts etc..

8. Reassemble the truck with body dude.

9. Attach 28 pieces of molding with body dude. Weather stripping etc., mirrors, reassemble the interior. Probably have to drill for the moldings after paint and assembly, due to the cab mounts being shot.

10. Hire someone to help re install parts for the cab removal (maybe hire). New gas tank. Add new wire harnesses, re-install the A/C and get the window wash system like new.

11. Then I methodically install grill, bumpers, heat stove and final touches.

12. Blow another $1600-$2000 on tires and wheels, call it done.


I'm actually taking notes. Ha!

Re: What did you do to your truck today? Chapter II
 

That was so funny! I was thinking "he did all that and all I got done in 6 hours was tweaking and flaring my fuel lines????" :lol: :lol: :lol:

Re: What did you do to your truck today? Chapter II
 

Welcome! :welcoem: Always nice to see new people join in the addiction....Hobby. :lol: Any questions you have ask away or use the "search" option. Just about anything you can think of someone has asked or done a good wright up on.

Re: What did you do to your truck today? Chapter II
 

Here are some updates on the rust repair. Got both front cab mounts replaced. Next it will be going on the rotisserie.

Re: What did you do to your truck today? Chapter II
 

More pics

Re: What did you do to your truck today? Chapter II
 

having grand pa's truck is way cool, welcome to the forum from Texas, you will learn a bunch from these great guys, first make it safe and have fun with it , I like it already ..... Don

Re: What did you do to your truck today? Chapter II
 

This is for last night: I fell out with the lights still on!

Yesterday was a big day: I got the rest of the new fuel line hooked up, all that is left is one minor adjustment and to put the carb back on and hook up the throttle and choke cables.

I got the gas tank lined back up and bolted down and hooked up the vent lines. All that is left there is to hook up the tank to the vent system (ran out of hose) and to hook up the charcoal canister.

The very next sunny day when I have at least one helper, I can heat up and put in the new rubber mat and if that fits well, put the seat back in. That will complete the cab and allow me to move on to the front end. I'll edit with pics later.

Re: What did you do to your truck today? Chapter II
 

Finally, tore down as far as shes going to get. Suspension parts are off the the blaster to save me some time. Once the firewall is patched up and painted I get to start putting all my NoLimitEngineering parts back on.

Re: What did you do to your truck today? Chapter II
 

these babies showed up last week too...

TR6060 out of a 14' SS Camaro with 1,400 miles

LC9 from a 13' Silverado w/ 12K miles

Taking the weekend off while the family is in town. Back at it again on Monday!

Re: What did you do to your truck today? Chapter II
 

Shined her up and drove her around. Might drop her into car show tomorrow.
Attachment 1403824