Re: Hydroboost Mounting Plates
Got my bracket in today. Fast shipping and great packaging. BTW bracket fits 94 Astro Hydroboost in a 72 blazer! perfect! Thx captain!!!!
|
Re: Hydroboost Mounting Plates
Thanks for the good words.
Just to be clear. What you bought is not a hydroboost mounting plate. You decided you did not want one. What you bought is a '67-'72 booster bracket. Quote:
|
Re: Hydroboost Mounting Plates
1 Attachment(s)
Forgot to post when I got the mounting hardware a while back... But it fits real nice and is very nice quality. Thank You!
|
Re: Hydroboost Mounting Plates
Thanks for posting pics of your installation.....looks good. Would you mind posting some info on the hydroboost and master you purchased? I know that the proportioning valve is the Wilwood 260-11179.
|
Re: Hydroboost Mounting Plates
Quote:
|
Re: Hydroboost Mounting Plates
Quote:
|
Re: Hydroboost Mounting Plates
I will send you a PM with ordering and payment info.
Quote:
|
Re: Hydroboost Mounting Plates
CaptainFab-
I got an 85 K20 that I'm converting to a manual trans & hydro-boost. I'm having a hell of a time finding a pedal assembly for such that doesn't cost a fortune. Locating a manual/vacuum version seems to be much easier (and cheaper!). So, I'm thinking I'll first convert it to manual clutch/vacuum (its currently auto/vacuum) and then use your bracket to convert it over to hydroboost. Am I understanding this right? You have a bracket that properly re-positions the hydro-boost unit to replace the vacuum unit? Does this correct the geometry difference in the pin height on the brake pedal? Any mods needed to the pushrod? Thank you in advance, Mike |
Re: Hydroboost Mounting Plates
I do not make any booster brackets or hydroboost mounts for the square bodies. There is no need since factory components are readily available. I do not know what the hole pattern would be if the factory booster brackets were removed from the vacuum booster. Those are riveted to the booster.
Quote:
|
Re: Hydroboost Mounting Plates
1 Attachment(s)
This is what I am looking for. Plate with 5 holes, booster hole and four mounting holes. It will be used in a 72 k5
|
Re: Hydroboost Mounting Plates
Are these still available?
|
Re: Hydroboost Mounting Plates
I fabricate all of my products everyday. Exactly which item are you asking about?
Quote:
|
Re: Hydroboost Mounting Plates
The hydro boost plate that mounts to the firewall in pic above this post
|
Re: Hydroboost Mounting Plates
That is not a regular production part. It was a special order for member Curtb1971. At the time I had a couple extra laser cut but I do not know if I have any left. I will have to look when I get top the shop tomorrow. You do realize that with this style you will have to open up the center hole to accommodate the nut on the hydroboost? Also this style does not lend itself very well to moving the pushrod attachment point on the pedal down 1"
Quote:
|
Pm sent for purchase of a bracket sir. Thanks!
Posted via Mobile Device |
Re: Hydroboost Mounting Plates
I replied to your PM from this morning.
Quote:
|
Re: Hydroboost Mounting Plates
PM Sent to Captainfab
|
Re: Hydroboost Mounting Plates
I replied to your PM.
|
Re: Hydroboost Mounting Plates
PM sent
|
Re: Hydroboost Mounting Plates
Do you know what "size" the nut is for the H B unit?
Where can I find a new one ? |
Re: Hydroboost Mounting Plates
Are you talking about the large nut that secures the HB unit to the mounting plate?
Quote:
|
Re: Hydroboost Mounting Plates
Quote:
|
Re: Hydroboost Mounting Plates
I really don't know and I forgot to take a look at one today. I do not think it is a standard thread pitch. The factory nut is 4 sided and is thin.
Quote:
|
Re: Hydroboost Mounting Plates
Pm sent for bracket, 64 c20
|
Re: Hydroboost Mounting Plates
I replied to your PM.
Quote:
|
All times are GMT -4. The time now is 12:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com