![]() |
Re: My 56 6bt 4X4 build.
Super . Thanks . I will have to take a peek when I have some time . His thread is getting huge now . A really cool build for sure .
|
Re: My 56 6bt 4X4 build.
The truck really looks good! Yeah, you these things move a lot of water in the cooling system for sure! Are you wanting to put a filter straight on the turbo, or do you need a pipe to get it away from the turbo and have the filter away from the engine?
|
Re: My 56 6bt 4X4 build.
Hey thanks . Yours is comming along nicely as well. Its nice once they start to look like trucks again ! I had a afe on order from summitt but it seems its on back order . going to call tonite and swich to a spectra that they say they have in stock. Maby order a fan at same time . cooling well now , even with a ratty old rad but i know once i find some traffic it will get hot eventually. hows the Excursion coming ? Thats my dream kiddie hauler as well.
|
Re: My 56 6bt 4X4 build.
Excursion is coming along. Ran into some issues trying to get the rear end set up. It is also missing some a/c wiring harness, and that has been a real PITA to locate. I'm trying to get the a/c lines figured out, got the trans shift cable figured out. Just have to get more time. :lol:
|
Re: My 56 6bt 4X4 build.
My 1 st prob so far. Clutch linkage started to bend where it pushes in the dodge master for the clutch. Once it tweaked a few deg the push was not straight this bent the rod where it goes into the master . I guess i know what Im up to tomorrow nite !
|
Re: My 56 6bt 4X4 build.
Quote:
Before I found that I used the motor out of a 62 pickup and fabricated the mount so it would work. Also had to modify the length of the arms to the transmissions. Think I used the switch assy out of the truck too. There are threads on adapting rear door wiper motors. Not difficult once you figure out the geometry. |
Re: My 56 6bt 4X4 build.
Quote:
|
Re: My 56 6bt 4X4 build.
I did not know there were factory electric ones. I will have to look into that .
Thanks again . Hows your truck coming along ? havent checked in i a while |
Re: My 56 6bt 4X4 build.
back at it, honey-dos and a wedding got in the way.
Posted via Mobile Device |
Re: My 56 6bt 4X4 build.
Had a very good wknd. I had a fabed bumber from bak in the day on the shop floor .
It was off a fleetside truck so some tweaking was required . got that done and installed. nothing trick but the truck needed a bumper and this one looks period correct. Did something else under the bak of the truck , going to post some pics and see who picks up on it . I think youll be on it it abt a second ryan ... Lol. Going to the exh shop on the wknd. Coming along nicely . |
Re: My 56 6bt 4X4 build.
What, no pics yet? :lol:
|
Re: My 56 6bt 4X4 build.
Nope no pics yet . you will like this tho . My box was here from summit tonite .
I took the spectra filter out and the inner cone was broke loose in the outer cone . Imagine if i didnt notice and my turbo fount it !! Good news was the guy from summitt was super . They are sending me a AFE now . Other than that i just installed my shift boots and puttered a bit . Going to post pics asap so I can see if you have been paying attention Ryan . Lol |
Re: My 56 6bt 4X4 build.
:lol: Waiting. :lol: My wife says I don't so we shall see.
|
Re: My 56 6bt 4X4 build.
Quote:
This ^^^^ Quote:
|
Re: My 56 6bt 4X4 build.
I'm ready to see those caps mounted! Where did you get those shocks? We met some folks from Canada on our Honeymoon. One was from Montreal and one was from Vancouver. I can say the Vancouver one wasn't as friendly as you have been!
|
Re: My 56 6bt 4X4 build.
2 Attachment(s)
So i have been joking around telling everyone I wanted to see who was on the ball and could spot the change I made to the rear of the truck after one member , oh hell ryan spotted sumtin I did wrong . So here are the pics .
This is my new rear bumper I got at Bills truck parts . Not perfect but it works well with the old work truck theme I had in mind when I started building this old girl. And i have a hitch now. |
Re: My 56 6bt 4X4 build.
No another cool note we went to a buddys place for the long wknd and a friend brought up his toy. Real Cool . We were rippen around in the mid 80's. This thing is loose ! I have gone just under twice as fast as this thing goes . But this deffinately qualified as the loosest ride Ive been on , Period !
|
Re: My 56 6bt 4X4 build.
1 Attachment(s)
Oops for got the pic .:lol:
|
Re: My 56 6bt 4X4 build.
Heck yes that Jet boat is sweet!!!! Your bumber looks great, and good job on the shocks. Looks mucho better! :lol:
|
Re: My 56 6bt 4X4 build.
I knew it wouldent take you long to spot the shocks ! Your truck is looken sweet . That boat wasent a jet ! 30% over drive 1 gear ! no rev . Revin abt 6200 with the jackshaft between the idiots , I mean passangers and the trans rite at your feet !!!
It was a killer ride . One that I dont know if I need to do again , if you know what I mean !!! |
Re: My 56 6bt 4X4 build.
:lol: Yeah, it sounds like a trip for sure!!
|
Re: My 56 6bt 4X4 build.
Quote:
What is your opinion? Is it as good as it sounds? |
Re: My 56 6bt 4X4 build.
Quote:
Still worth the trip if you need something tho. If you just looking to walk around I'd wate till I had a shopping list. |
Re: My 56 6bt 4X4 build.
I bet that boat is a blast to drive! What kind of engine is that? Looks like a backwards big block Chevy?
|
Re: My 56 6bt 4X4 build.
Quote:
Hows your truck doing? Im going to p u my speedo extension from napa tomorrow . Will see how that works . I did a diy fe allignment the other day . Not perfect , I think I toed it in a bit too much , but it drives a lot better now . You ever thought abt movin your thread over to the diesel conversion section ? Seems there is a lot more for me or us over there . Not too sure how you do or if you can do that . |
All times are GMT -4. The time now is 07:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com