Re: My 68 c10
4 Attachment(s)
Here it is my truck crooked finally is laid in the front
i didnt take pic of it layed out up front. only fully raised but here they are a long day of work thanks to my dad and my buddy jeremy |
Re: My 68 c10
Right on, lookin good!
|
Re: My 68 c10
when you said somehting about going to the sonic on my thread did you mean in a****er
|
Re: My 68 c10
awesome!!! No discs?...
cant wait to see it laid out! |
Re: My 68 c10
Just used some plates and cups or what??
|
Re: My 68 c10
Quote:
And for sure ill put pictures of it laid out tomorrow. well the front laid out. |
Re: My 68 c10
Quote:
Quote:
Quote:
|
Re: My 68 c10
4 Attachment(s)
Here are the pic i took today so i can show you guys how crooked looks laid in the front
planning on doing the rear this weekend possibly |
Re: My 68 c10
1 Attachment(s)
more
|
Re: My 68 c10
You have drop spindles on it at all?? What are the plans for the rear?? Truck looks good man going to have to cruise up to fresno sometime and check it out
|
Re: My 68 c10
Quote:
my plans for the rear is the super notch and run the trailing arms for now and save more up to buy my wish bone setup. but yeah im gonna do my setup myself. i work at an exushuast shop welding exhuast all day and im trustin my self and my welds to do it all my self. And yeah im taking my truck to the Freaks of Nature show in august here in fresno. underconstruction. |
Re: My 68 c10
looks awesome man! so just cups/bags?
|
Re: My 68 c10
yeah just bags and plates. no drop spindles
|
Re: My 68 c10
what is the date on that show man. I want to do my bags soon but never really messed with the as far as wiring and routing. I need some guidance on what to buy, I want them to be slow a quite, Thinking on just doing the fronts first on my truck. Let me know heres what i believe i need. Upper plates and lower cups, bags, fittings, lines, compressor, about a 5 gallon tank, and valves but dont know which ones fill me in on your set up and costs of it if you dont mind.
|
Re: My 68 c10
Quote:
i got a simple setup i spent probably 200 on my front setup with just the bags and cups plates and lines fitting etc. but i am runnin a t too a bike fitting for now i got danz vavles i need to put in but i want to get parkers they are really great. |
Re: My 68 c10
your running what kind of fitting and since you dont have valves are you still running the compressor..
|
Re: My 68 c10
well right now i mounted my compressor so i can hook them up when i need too.
the fitting i got from avs which is right around the corner from my dad. i got the 90 degree swivel push pull connectors on my bags and once everything like frame mods are done i will purchase the rest of my lines so i can run my compressor tank and valves |
Re: My 68 c10
How much more can you go down in the front before the control arms are on the ground are your cups cut
|
Re: My 68 c10
oh so if you where to drive the truck you wouldn't be able to dump it out and raise it up as you please because everything is not hooked up
|
Re: My 68 c10
Quote:
and thats with out my drop spindles so once i put my drop spindles on my control arms so lay on the ground especially since im going with smaller tires Quote:
|
Re: My 68 c10
Oh ok, that would be a big problem for me. Was looking on a few sites last night seen a few 5 gallon tanks and a 9 gallon one that looked nice, I dont understand why some have larger holes then others and how many i actually need.
|
Re: My 68 c10
nice work
|
Re: My 68 c10
you keepin it 50th annversary style when you repaint also about your steering wheel and horn cap whats the plans with those
|
Re: My 68 c10
Quote:
|
Re: My 68 c10
purchased my c notch today and now gathering up more money so ican buy the rest of my stuff i need and my drop spindles tomorrow is payday so i get more money to spend on my truck
|
All times are GMT -4. The time now is 10:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com