Re: my 50 build... why not?
 

Haven't had a whole lot of time lately.

Getting some wiring done. Came to a stopping point to see where my gauges and other stuff will go. Started on the center console too.

http://i133.photobucket.com/albums/q...ps504e3c6d.jpg

http://i133.photobucket.com/albums/q...psfdddde6c.jpg

http://i133.photobucket.com/albums/q...ps5ac780ff.jpg

http://i133.photobucket.com/albums/q...ps644a52e1.jpg

http://i133.photobucket.com/albums/q...ps6382e03b.jpg

2 coats of glass mat put down, and 3 on the top. I will pull out the foam inside and see how sturdy it is then decide if i will add another layer or not. Then I have to make inner bracing, and mounts for shifter.

Placing my order for my converter hopefully this week with Pete from hughes.

then hopefully a week or so after that, I can get my big engine parts order.
Posted via Mobile Device

Re: my 50 build... why not?
 

Awesome work and progress. Keep it up!
Posted via Mobile Device

Re: my 50 build... why not?
 

2 coats on the sides of the console, 3 on the top. Bracing has been added and riveted in. One more coat will go on the sides to cover the rivets.

Shifter has been mounted, and a cover "bubble" if you will, is also glassed.

I cut out the gauge panel as I'm going to make it removable, and blend in to the rest. It will be tricky, but I should be able to pull it off.

Third gear

http://i133.photobucket.com/albums/q...ps51f96e92.jpg

Park

http://i133.photobucket.com/albums/q...psf1dc6f61.jpg

Starting on the removable gauge panel.

http://i133.photobucket.com/albums/q...psdd959930.jpg

The "bubble to cover the console. Waiting for it to harden, then I will smooth it up a bit and make it a bolt on piece.

http://i133.photobucket.com/albums/q...ps57501d7c.jpg

The bracing

http://i133.photobucket.com/albums/q...ps40e63fb6.jpg


I gave freakshow converters a call. He pretty much won me over. Hughes was $640 already set up for the turbo setup beings its another 260 to get it re stalled. Freakshow is 320 shipped and 120 to re stall. Michael is a super awesome dude and seems to know his ****. Stall should be around 3000 on the foot brake and on the t-brake and flashes around 4000. Sould be here next week.
Posted via Mobile Device

Re: my 50 build... why not?
 

About 6 hours of filler work on the console and its only about half done. Yuck. I need to open up my gaps on the gauge panel a bit, then smooth up the lines.

http://i133.photobucket.com/albums/q...ps9a9cafae.jpg

http://i133.photobucket.com/albums/q...ps77f7459e.jpg

http://i133.photobucket.com/albums/q...ps2e45dcef.jpg

http://i133.photobucket.com/albums/q...pse8458699.jpg

http://i133.photobucket.com/albums/q...pse4891f38.jpg

http://i133.photobucket.com/albums/q...psbcba4034.jpg

Converter showed up Friday. Picked up the f body oil pan as well.
Posted via Mobile Device

Re: my 50 build... why not?
 

Nice work, truck is looking great !

Shawn

Re: my 50 build... why not?
 

Freakshow is very good to deal with. I worked with Michael on 1 for my chevelle and put it behind a 436 sbc and it has worked great for over a yr now. Very nice build, I'm getting ideas for my 51.

Re: my 50 build... why not?
 

Sick build man! Very happy to see shiny paint! I like flat and satin paint, but shine is devine!

Re: my 50 build... why not?
 

This truck is beautiful...I could hang that rear fender on my wall as art and look at it all day! Can't wait to see the final result.

Re: my 50 build... why not?
 

bubba, thanks! I wanna see yours done! Any more progress on yours? I love fat tires under old hot rods. Thats the way it should be!

vht, yeah, michael was pretty awesome. I called them at 8pm the one night just to leave a message but he was still there working. What are your plans for yours?

Fluffy, thanks. I gotta get around to wet sanding and buffing it one of these days now. uggh.

speesh, thanks!

Re: my 50 build... why not?
 

I'm planning on pulling the 436 sb out of my chevelle for the truck. the chevelle will get a milder 383 sb and let my wife drive it. The 436 has a Motown block, dart heads, mech roller with a super victor and QF 850. I built the 350 turbo using Coan stuff and a freakshow conv. Runs pretty nice.

Re: my 50 build... why not?
 

nice work on the console
block sanding and smoothing is a pain
be careful, fiberglass can be addictive :D

Re: my 50 build... why not?
 

VHT, that sounds like a beast! Any videos or a build up on it? If not, you should... Glad to hear of another successful freakshow user. Lol sounds like a drug.

Ogre, thanks a lot! You're pretty much the fiberglass interior god on this forum as far as I know.

I will end up glassing the back of the cab, and a bunch of other interior parts, but probably after I'm able to drive it around.

I'm fairly happy with how it turned out. Hopefully this week I can have the floor mounts made for the console to bolt it in, install all the gauges, cup holders, and the cage for a CD player.

http://i133.photobucket.com/albums/q...ps99ee210c.jpg

http://i133.photobucket.com/albums/q...ps145f5bdd.jpg

http://i133.photobucket.com/albums/q...ps10f8beaa.jpg

http://i133.photobucket.com/albums/q...pscfcff629.jpg
Posted via Mobile Device
Posted via Mobile Device

Re: my 50 build... why not?
 

Nebdrummer. Your consul looks great! That is one awesome truck you're building. Good luck going forward.

Re: my 50 build... why not?
 

you may bow before me :D:D:D

still looks good from god's view

http://i133.photobucket.com/albums/q...ps99ee210c.jpg

Re: my 50 build... why not?
 

nebdrummer, progress has been slow lately. I have been working on mocking up front sheetmetal, running boards, and bed location with raised floor. I’ll get some pics and update on build pretty soon. Thanks for asking.
Have a good one.
Shawn

Re: my 50 build... why not?
 

That console looks killer! Great job

Re: my 50 build... why not?
 

nebdrummer, the console looks great. It will be a great looking truck and I am sure will be quick as well.


Shannon

Re: my 50 build... why not?
 

Thanks guys. Progress is once again going to be slowed. My finances didn't work out as I had planned. So now, I'm going to finish the walls in the garage. I got one set of shelves hung, and 2 walls painted white. Now I need to lay down the floor border and move stuff around to finish the rest.
Posted via Mobile Device

Re: my 50 build... why not?
 

This thing is super nice! Keep up the fine work!

Re: my 50 build... why not?
 

I've been busy as hell with things not related to my pickup. But, anywho, we had a big car club meeting planned, so I got the garage done minus the ceiling. So that's a plus. Doesn't look like it though. Lol

http://i133.photobucket.com/albums/q...psb237cebb.jpg

http://i133.photobucket.com/albums/q...ps95e3d076.jpg

http://i133.photobucket.com/albums/q...ps6c9a5372.jpg

I'm fairly happy with how the console turned out. I need to make the floor mounts, cup holders, and get the cage for a CD player.


http://i133.photobucket.com/albums/q...ps6afa7a88.jpg

wide band will go in the middle

http://i133.photobucket.com/albums/q...ps41206206.jpg

We have been remodeling my basement for the last month or so. Still need carpet, but that will be after the other half of the basement. Also dug in deep into the kitchen already. Yuck.

http://i133.photobucket.com/albums/q...ps49a50c7f.jpg

http://i133.photobucket.com/albums/q...psd6c6562a.jpg

On the bright side, I should be ordering the turbo next week. Then I will be sending the carb off to c&s to get it converted to e85 and other goodies.

Re: my 50 build... why not?
 

I feel your pain, house projects kept me away from my truck for 6 years between tear down and start of reassembly.

Re: my 50 build... why not?
 

Ohh man! I don't want it to be that long! Lol.

Re: my 50 build... why not?
 

trucks coming along nice. I feel ya on the home front, its got me a solid year behind on projects.

Re: my 50 build... why not?
 

Probably going to be even longer for motor parts now... Just ordered the new GE Artistry series. Fridge, stove, range microwave, and dish washer. I don't know if that's a good thing or a bad thing... Lol

Re: my 50 build... why not?
 

hey man, gotta keep the wife and fam happy too (if you got those) if not, a nice home keeps a clear mind, a clear mind has more roof for mechanical thinking. I'm on a similar boat as you, getting set behind sux, but it will all pan out. Enjoy your nice new kitchen.