Re: 68' Chevy c10
how come u have so many ice machines
|
Re: 68' Chevy c10
Quote:
Quote:
|
Re: 68' Chevy c10
hey john . your heater box looks nice.I'm trying to locate one so when i need it ill have it . what did you use on it ? the finish looks great..johnny
|
Re: 68' Chevy c10
Thanks Johnny, It's just rattle can rustoleum hammered finish black. I sprayed several light coats so I wouldn't get too much hammered effect. then sprayed the blower motor satin black.
|
Re: 68' Chevy c10
5 Attachment(s)
I never posted any pics of the truck still together besides the first post. before I took it apart I had finished a good deal of the bodywork. In these pics I still had not done the rocker panels or the drivers fender.
Attachment 840362 Attachment 840363 Attachment 840364 Attachment 840365 still some hammering to do, but it's getting there:metal: Attachment 840366 |
Re: 68' Chevy c10
Coming right along, seems like you can never get enough practice with metal work and there is always something new to learn...
|
Re: 68' Chevy c10
Thanks Adam, At least with classic Chevy steel you can work with it without it falling apart.:lol: That fender was in such good shape everywhere else, I didn't mind putting some extra time in to fix it.:chevy:
|
Re: 68' Chevy c10
Looking good! Nice progress on the fender
|
Re: 68' Chevy c10
Quote:
|
Re: 68' Chevy c10
Received my upper clutch pushrod today from board member blap. very nice condition. Thanks again Brad.:metal:
|
Re: 68' Chevy c10
Awesome project John! I just got caught up and I am looking forward to updates. This is gonna be a sweet ride when you get done, love the attention to details... Subscribed
|
Re: 68' Chevy c10
Quote:
|
Re: 68' Chevy c10
3 Attachment(s)
Finally got to do some work in the garage. too bad most of it was cleaning up/making room. I did get the alt. bracket installed. it turned out ok and I can get the valve cover off without removing the alt. bracket now.:metal:
Attachment 856684 Attachment 856685 also picked up these rolling frames. I'm planning on using one to put the truck bed on for painting. price was good, free! Attachment 856686 |
Re: 68' Chevy c10
Free is always good. Good to see you getting some more work done!
|
Re: 68' Chevy c10
It's gonna be a beautiful thing! Subscribed.
|
Re: 68' Chevy c10
Great looking project, nice job with all of the little details....they'll all come together and make you truck stand out once its complete. I'm in a very similar spot in my build, I look forward to progress.
|
Re: 68' Chevy c10
Any new updates on the truck, or any progress made lately???
|
Re: 68' Chevy c10
Digging the build so far. Brought up a lot of detail I had not thought about. Can I ask about your sandblasting setup? Spent 3 hours trying to get my compressor and blaster to like each other...finally gave up and went to wire wheels. Blaster is going back to the store :devil:
|
Re: 68' Chevy c10
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: 68' Chevy c10
[QUOTE=
Thanks ChevyNewb, I'll put a pic of my blaster setup on here later, but I can tell you moisture is your worst enemy when blasting. my blaster nozzle clogged up about every 3 sec. until I used a moisture trap at the gun.[/QUOTE] I use one at the compressor and one at the tank and have run it for 6 hours straight without a hiccup... might try that as it is easier and lighter than at the gun! |
Re: 68' Chevy c10
Looking good brother!!
|
Re: 68' Chevy c10
3 Attachment(s)
Quote:
Attachment 925422 moisture trap at the gun. sorry for the ugly pic. Quote:
I just had the drive shaft done. since I changed from the old three speed trans, I had a slip yoke installed, new spicer bearings and new carrier bearing as well. some pics. Attachment 925423 Attachment 925424:chevy: |
Re: 68' Chevy c10
3 Attachment(s)
Also finished the clutch push rod.
This is what the old one looked like on both ends. it can be repaired. Attachment 925425 This one I got from board member Blap. Attachment 925426 Attachment 925427 |
Re: 68' Chevy c10
2 Attachment(s)
|
Re: 68' Chevy c10
Nice progress John, I haven't seen you updating in a while. Rock on!
|
All times are GMT -4. The time now is 12:30 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com