And so it begins................
This is my project jump-off thread. I've talked about the truck already but here's a recap. The truck belonged to my late grandfather. My uncle had purchased it from him before he passed away. I'm not sure exaclty how long he's had it but I know I've been wanting it for the last 20 years. Time has taken a small toll on the truck but it's still driveable and I'm gonna have fun fixing it up. It will be more of a resto-mod than a restoration. I know my grandfather and my uncle would want me to build it where it will bring the most enjoyment. I've got a 1983 Celebrity ski boat that's gonna look right at home behind this truck!
Here's the before pics............... http://i4.photobucket.com/albums/y14...GMC/truck1.jpg http://i4.photobucket.com/albums/y14...GMC/truck2.jpg http://i4.photobucket.com/albums/y14...GMC/truck3.jpg http://i4.photobucket.com/albums/y14...GMC/truck5.jpg Definitely going to need a seat! http://i4.photobucket.com/albums/y14...GMC/truck7.jpg http://i4.photobucket.com/albums/y14...GMC/truck8.jpg http://i4.photobucket.com/albums/y14...MC/truck10.jpg I'll give you 2 guesses what my first order of business will be................ here's a small hint!!!!! http://i4.photobucket.com/albums/y14...MC/truck12.jpg Just for kicks, this is the motor I built for the 4x4. The truck I used to pull the green beast back from Rogers, Arkansas to OKC. http://i4.photobucket.com/albums/y14...MC/truck11.jpg Did you spot the HEI distributor? lol, no more computer controlled anything in the 4x4. :metal: I'll be looking for advice and parts as I go along. Starting with a cool seat! And then a nice shaft mount stereo! lol I'll post the update pics in this thread as I go. |
Re: And so it begins................
Nice truck, I am exited to see it come along.
|
Re: And so it begins................
Looks like a great truck to start with.
|
Re: And so it begins................
Nicve start
|
Re: And so it begins................
Quote:
|
Re: And so it begins................
I knocked out the insurance yesterday, I'll hit the registration tomorrow and then it's break out the toolbox.
I also noticed today that the right rear is slightly lower than the left rear and the tires are inflated the same. Since there aren't any rubber body mounts on the bed, I'm assuming it's in the springs. Anyone know if it's better to go after some new springs or try to have these re-curved? |
Re: And so it begins................
keep us posted on your build.. we all love pictures :) glad to see another truck being restored
|
Re: And so it begins................
Subscribed
Looks like you got a really solid truck to start with |
Re: And so it begins................
nice looking gmc. i will be watching this one:metal:
|
Re: And so it begins................
looking good!!!!
|
Re: And so it begins................
Looks like a real solid truck, less rust is alway great. Nice that it has A/C too.
|
Re: And so it begins................
Quote:
However, the 72 does have the factory air also, I just need to replace the froze up compressor. Upon checking the valves, it appears to still have freeon in it. |
Re: And so it begins................
Quote:
|
Re: And so it begins................
Yeah, I'm thinking about settling for independent air shocks until I feel like messing with it.
|
Re: And so it begins................
Update
New wheels New dual exhaust complete (2.5" pipes and 30" glass packs with 2.5" cores) New Door locks, ignition switch, locking gas cap New spark plugs Fluids and filters changed. http://i4.photobucket.com/albums/y14...72%20GMC/1.jpg http://i4.photobucket.com/albums/y14...72%20GMC/2.jpg http://i4.photobucket.com/albums/y14...72%20GMC/3.jpg http://i4.photobucket.com/albums/y14...72%20GMC/4.jpg http://i4.photobucket.com/albums/y14...72%20GMC/5.jpg http://i4.photobucket.com/albums/y14...72%20GMC/6.jpg http://i4.photobucket.com/albums/y14...72%20GMC/7.jpg http://i4.photobucket.com/albums/y14...72%20GMC/8.jpg |
Re: And so it begins................
Nice! Are those wheels 10 inch? All around?
The tires look good, man! |
Re: And so it begins................
Nice exhaust! Was it custom bent or a kit (and if it was a kit details please).
|
Re: And so it begins................
rims look nice on there. where the vid of the exhaust?;)
|
Re: And so it begins................
Nice how much did the rims and tires cost all together
|
Re: And so it begins................
Quote:
The rear wheels are 15x10, the fronts are 15x8. The front tires are 255/60/15 Quote:
It was custom bent front to back by University Muffler in Norman. They ordered me the glasspacks with true 2 1/2" cores. Quote:
|
Re: And so it begins................
Quote:
The 2 1/2" exhaust was 290.00 complete including all new brackets dampers. |
Re: And so it begins................
Ok here's my first shot at a video upload. It will sound the best if you have a sub on your computer! :lol:
Truth be known though, the exhaust sounds louder in the video than it actually is. But it does sound good though, you can barely touch the pedal and it sounds like a beast!!! I love the Big Blocks...... :metal: |
Re: And so it begins................
As a note, that video is with the secondaries on the carb disconnected. It's the original quadrajet running only on the primaries right now. When I hook the 4bbl back up I'll do another video to see how much difference there is in sound.
|
Re: And so it begins................
Those wheels look awesome man! They really set off the truck.
Have fun with it :) |
Re: And so it begins................
Quote:
|
All times are GMT -4. The time now is 11:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com