Pics of plug wire routing with hei and ram horns
I need some ideas on how to cleanly run my new custom fit plug wires and I still have my ramhorns and am using HEI any help will be greatly appreciatede
TIA....Randy |
Re: Pics of plug wire routing with hei and ram horns
1 Attachment(s)
We make wire separators out of electrical ties and use 180 degree ends on the spark plug wires to keep them away from the Rams horn manifolds. Here is a picture to show you the idea.
Jim |
Re: Pics of plug wire routing with hei and ram horns
1 Attachment(s)
Randy, Here's the way I routed mine with HEI and ramshorn exhaust. Pic shows point dist. instead of HEI, but it routes the same. Hope this helps? You can get the plugwire stands from GMCPauls. He has them in stock.
|
Re: Pics of plug wire routing with hei and ram horns
3 Attachment(s)
bringing this one back from the dead... borrowed a pic from Bruce88... I already have 90 degree boots on my wires or i'd go this route... looks nice.
40200 - JEGS 8.0mm Red Hot Power Wires RNM-1101S - R&M billet wire looms |
Re: Pics of plug wire routing with hei and ram horns
I used the plug wire off of a vette when i had rams horn manifolds. they are much longer than the truck wires which allows you to route the wires under the manifolds.
LMC has some spark plug wire stands/holders that will work for these types of plug wires and you can see how they are routed. on page 158, in the Ignition section, of my LMC catalog, they have the plug wire retainers for the vette style wires with the ram horns manifold. and depending what version of the manifolds you have, i would grind the manifold casting a bit around plug 6. this was notorious for burning the boots and casuing arching. the manifolds pictured above are much nicer castings than mine were and they clearly dont have the problem. but some do. |
Re: Pics of plug wire routing with hei and ram horns
I just run them the length of the valve covers (top) and curl them around the front
|
Re: Pics of plug wire routing with hei and ram horns
OHIODAN has the right idea.... thatz how i did mine..
|
Re: Pics of plug wire routing with hei and ram horns
alright where are you guys getting these long ol wires from? custom making them? I ordered mine for a 77 chevy truck and they work and clear the ramhorn but they look awful, DZNUCKS: what year vette should I ask for?
|
Re: Pics of plug wire routing with hei and ram horns
most use universal, cut to length kits, vs pre-fabbed.......
|
Re: Pics of plug wire routing with hei and ram horns
Quote:
|
Re: Pics of plug wire routing with hei and ram horns
Quote:
Have any pics, or did you route the same as the diagram above? |
Re: Pics of plug wire routing with hei and ram horns
Quote:
|
Re: Pics of plug wire routing with hei and ram horns
Quote:
|
Re: Pics of plug wire routing with hei and ram horns
Here's how I did mine...mostly stock routing except I did not run the front wires behind the manifolds as I couldn't find a good place to the hold them secure and was worried about burning them.....so I used a clip on the frame..
http://lh3.ggpht.com/_2wzS50GoNjQ/SW...0/100_0096.JPG http://lh3.ggpht.com/_2wzS50GoNjQ/SU...s%20%23102.jpg |
Re: Pics of plug wire routing with hei and ram horns
1 Attachment(s)
Been awhile since I saw this thread. I used plug wires for a 75 vette with HEI. Worked good.
|
Re: Pics of plug wire routing with hei and ram horns
I second the billet plug wire holders... I had those on mine and they are coming back unless I do a duramax / allison swap ;)
|
Re: Pics of plug wire routing with hei and ram horns
on the front plug wires, i routed mine between the engine and the motor mount...
|
Re: Pics of plug wire routing with hei and ram horns
Quote:
|
Re: Pics of plug wire routing with hei and ram horns
Quote:
|
Re: Pics of plug wire routing with hei and ram horns
Quote:
http://www.eastwood.com/factory-gray...ating-kit.html RM |
Re: Pics of plug wire routing with hei and ram horns
Ordered mine from Kingsbonre
and used the original mounting method. s/t http://i733.photobucket.com/albums/w...k/DSC01739.jpg |
Re: Pics of plug wire routing with hei and ram horns
ok so the 77 or 75 vette are longer?
|
Re: Pics of plug wire routing with hei and ram horns
Quote:
My wires are run per the diagram. I used what NAPA had labeled as for an RV of that same vintage. probably the same as the vette. Plenty of length to route in various different pathways. |
Re: Pics of plug wire routing with hei and ram horns
love this thread. going to start my wires over this weekend!:metal:
|
Re: Pics of plug wire routing with hei and ram horns
I know I said I ran my wires as per diagram but that was before I rebuilt my engine. After the rebuild I used the billet aluminum wire managers and went over the top of the ram horns. I used the Kevlar wire shields to protect the wires from the high heat stored in the manifold. The wire managers keep the wires far enough away from the manifold that I have not had any trouble.
http://i361.photobucket.com/albums/o...psc062ed9b.jpg http://i361.photobucket.com/albums/o...pscb5a831e.jpg |
All times are GMT -4. The time now is 01:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com