LS1 into a 73 cheyenne
5 Attachment(s)
I'm in the process of doing a swap. Ls1 from a 98 Camaro into a 1973 Chevy truck s/wheelbase.
Engine: LS1 from 98 Camaro, modified with LS6 heads, LS6 intake manifold, 5 pin mass air flow, twin horn air intake. comp cams kit LSR 281-289 113. Headers from Street & Performance. Taylor 10.4mm ignition wires. Full set of billet pullys No heater or A/C unit Transmition: 4L60E ford 9" Strage center section with 4.11 gears Rear suspension : 4 link from ridetech with ridetech adj. coilovers Exhaust: dual, headers from Street & Performance 2 1/2" collectors, Hooker aero chamber mufflers, on 2 1/2" pipes, stainless tips from Cherry Bomb Radiator: Griffin aluminum with trans cooler, in/out water lines on passenger side. Trans cooler lines on driver side. Gas Tank: I will be running only 1 16 gallon tank from a 87 with in tank fuel pump, reason for upgrade is for the in tank baffles so the engine wont starv. Gauges: Autometer Harness: stock harness and computer, modified harness and re-tuned computer Brakes:2010 C6 Corvette style front- 14" 6 piston rear-13.5" 4 piston - master cylinder from Wilwood note: may encounter vaccum issues due to cam and massive breaks, if so i will run an electric vaccum canister More to follow..... |
Re: LS1 into a 73 cheyenne
5 Attachment(s)
pics
|
Re: LS1 into a 73 cheyenne
3 Attachment(s)
exhaust
|
Re: LS1 into a 73 cheyenne
4 Attachment(s)
some more pics
|
Re: LS1 into a 73 cheyenne
Very nice.
|
Re: LS1 into a 73 cheyenne
X 2................nice
|
Re: LS1 into a 73 cheyenne
awesome :metal::metal:
|
Re: LS1 into a 73 cheyenne
:metal::metal::metal::metal::metal: pure LS powa!!!!!!!
|
Re: LS1 into a 73 cheyenne
that is awesome!! :metal:
what fans are you going with? and how many miles are on the motor/trans? the heads look like they've been gone through and cleaned up. SWEET!! looking forward to updates!! |
Re: LS1 into a 73 cheyenne
epicccccc..
very nice photog skills my friend. cant wait to see this together |
Re: LS1 into a 73 cheyenne
Awesome project. It's going to be badass when done
|
Re: LS1 into a 73 cheyenne
Lookin good!
|
Re: LS1 into a 73 cheyenne
another subscribed thread
|
Re: LS1 into a 73 cheyenne
3 Attachment(s)
Any recommendations on the electric fan? i think I'm gonna go with the Jegs single 16" S-Blade 2200 CFM puller. The engine and tranny had 70K+ miles.
|
LS1 Swap to a 73 cheyenne
deleted double post
|
Re: LS1 into a 73 cheyenne
i'm planning on the same radiator... but i gotta look into this. http://hotrodlane.cc/77chevytruck/77chevy.htm
apparently you can order the fans to go with the radiator. btw, (if you dont mind) how much did the radiator alone set ya back? here's a couple more options too... http://bertok.us/agreif/fans/fanstech.htm http://www.chevytalk.org/fusionbb/sh...hp?tid/194489/ |
Re: LS1 into a 73 cheyenne
oh yea, the intake runners sure look clean for 70k!;) how did you gettem looking like that??
|
Re: LS1 Swap to a 73 cheyenne
deleted double post
|
Re: LS1 Swap to a 73 cheyenne
deleted double post
|
Re: LS1 Swap to a 73 cheyenne
deleted double post
|
Re: LS1 into a 73 cheyenne
Those are not 98 model heads 97&98 LS1s had perimeter bolt valve covers VS the center bolts on the 99 & up
|
Re: LS1 Swap to a 73 cheyenne
Gonna be sick. Cant wait to start a LSX swap of my own.
|
Re: LS1 Swap to a 73 cheyenne
great start cant wait to see it finished
|
Re: LS1 into a 73 cheyenne
he said it has ls6 heads
|
Re: LS1 into a 73 cheyenne
There not LS6 heads either. LS6 heads have a 243 casting number. It looks like 799 on these or 79somthing
|
All times are GMT -4. The time now is 03:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com