ECE 6 lug disc brake rotors?
I have a 69 1/2 ton truck and I noticed that ECE sells 6 lug rotors. What do I need to purchase to put these on my factory manual drum brake truck? I noticed that they sell a conversion bearing kit as well. Does this mean that I can put the rotors on my current drum brake spindles?
|
Re: ECE 6 lug disc brake rotors?
I don't believe so. If I'm not mistaken they are designed to work with the spindles that Early Classic sells. It's much easier to get the a-arms, spindles, etc. from a 73-87 truck or 73-91 'burb and switch it over. All that stuff bolts to your original crossmember. Early classic sells the conversion kits, too Although they do cost some coin, they are top notch in terms of quality and customer service.
|
Re: ECE 6 lug disc brake rotors?
The ECE 6-lug rotors will work with any spindle that is made for an 1-1/4 wide rotor up to 1987 with some exception.
They will work with: 1) 71-72 spindles 2) 73-87 spindles (only the 1-1/4 inch wide version) 3) 73-91 2wd suburban spindles 4) 73-82 2wd blazer spindles. 4) All 63-70 disc brake conversion aftermarket spindles You will also need to change the master cylinder and porportioning valve. |
Re: ECE 6 lug disc brake rotors?
Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=338655 I did the ECE rotors with a set of 71-72 disc brake spindles. Some aftermarket 63-70 disc brake spindles would allow you to use the original '69 balljoints and tie rods. I don't know of a 6-lug rotor that will work with drum brake spindles. |
Re: ECE 6 lug disc brake rotors?
Quote:
I agree with the last statement, I don't think anyone has made any kind of "bolt on" kit. Most people buy new disc spindles because they want to lower the truck and get a disc brakes at the same time. I'm not sure what the bearing conversion kit is for, but the drum spindles don't have any brackets or provisions to mount the disc brake calipers to. |
Re: ECE 6 lug disc brake rotors?
There is a company that makes a disc brake conversion using the drum spindle,... BUT it requires you to use a 68-72 chevelle rotors which is 5-lug and the 5x4.75 chevrolet car bolt pattern.
|
Re: ECE 6 lug disc brake rotors?
Didn't know that! What company is it? I'd actually like to see how they mounted the brackets.
|
Re: ECE 6 lug disc brake rotors?
Quote:
http://www.ecklerstrucks.com/product...3&dept_id=1035. |
Re: ECE 6 lug disc brake rotors?
Wow, if you can deal with the car pattern, that's less than half the cost of the ECE kit.
|
Re: ECE 6 lug disc brake rotors?
Thanks for the info. I have access to a 71-72 frame that has a complete disc brake setup on it. I'll just pull the complete cross member the next time I go up there. The frame also has a 5 lug rear end on it. Any idea what its worth? I notice a bunch of guys on the forums want them so that they can run five lug wheels. I just got a set of 6 lug rallyes for my truck so I don't plan on swapping to a 5 lug wheel.
|
Re: ECE 6 lug disc brake rotors?
Just remember that the '71-72 rearends are wider than the '67-70.
|
Re: ECE 6 lug disc brake rotors?
Quote:
|
Re: ECE 6 lug disc brake rotors?
Quote:
You have to be a subscribing member to post a "For Sale", "WTB", or "WIW" ad. Just subscribe,... tack the extra $25/year subscription fee on to the price of your parts,... and you will have a free membership. It's a great way to find/sell parts and "supporting the board" is a good idea anyway. |
Re: ECE 6 lug disc brake rotors?
I'm starting to think ahead on what I need to convert my 67 manual drum/drum to power front disc. I'm planning on keeping 6 lug. Anyway, I have a place that has plenty of front disc donors that I have access to. So, from what I'm reading, it sounds like it's possible to get everything from a donor and then add the 6 lug rotors from ECE. Is this correct? Thanks!
|
Re: ECE 6 lug disc brake rotors?
You will have to use the tie rod ends from the 71-72 truck as well IIRC.
|
Re: ECE 6 lug disc brake rotors?
Quote:
|
Re: ECE 6 lug disc brake rotors?
Quote:
|
Re: ECE 6 lug disc brake rotors?
Should bolt right in for you... without any issues.
|
Re: ECE 6 lug disc brake rotors?
Bolt for bolt it's the same. When I was at the junkyard I also grabbed the steering box, all the lines (rust free SC truck) and the power booster/mc and proportioning valve. Not 100% sure, I'm a little fuzzy on this, but I think that if you use your old steering box, I think you may need a 71/72 pitman arm for it, but if you get everything off of a 71/72, it will all bolt up.
|
Re: ECE 6 lug disc brake rotors?
so is there a kit that lets you keep your original 6 lug drum spindle and convert it to 6 lug disc? so kit would have caliper, rotors ect
|
Re: ECE 6 lug disc brake rotors?
I have been considering the swap that uses the chevelle rotors and camaro calipers. One thing that bothers me is its an 11 inch rotor compared to the trucks 12 inch rotor. Being that my truck has front drums I would think that upgrading to disc would be a huge improvement even if they are smaller rotors. I haven't been able to find anyone with the conversation to ask how it actually works so I am waiting before I decide if that's how I want to do it. I want the car pattern for wheel choice and only use the truck as a street strip toy.
Posted via Mobile Device |
Re: ECE 6 lug disc brake rotors?
Guys dont forget to grab that Mastercylinder an powerbooster, also the proportioning valve
|
Re: ECE 6 lug disc brake rotors?
OK, I know this is an old thread but I hope someone knows...
WHO is ECE and where do I get JUST the 6 lug rotors that fit the 70-87 1 1/4" spindles??? |
Re: ECE 6 lug disc brake rotors?
Quote:
Quote:
|
Re: ECE 6 lug disc brake rotors?
OK, thanks for the info on ECE.
No, I don't want to keep the original spindles, I have a 5 lug 73-87 setup on my 63 and I want the 1-1/4" 6 lug rotors so I can keep my 6 lug wheels. Thanks |
All times are GMT -4. The time now is 07:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com