Windsield Wiper Delay
Ready to ship! Still just $56.95 shipped to the continental US.
Originally, I started this project as a windshield wiper delay unit specifically for 67-72 Chevy Trucks. It has now evolved into a multi year adaptable unit for Chevrolet cars and trucks with electric wiper motors. Fully compatible with GMC as well. This device gets wired into your existing circuitry with no cutting, splicing or modification of your wiring harness and it can be taken out before you sell your project and put into your next one! Normal wiper/wash(if equipped)operation is not affected as this unit provides the necessary pulse of ground to activate your wipers at a desired interval between 3 and 30 seconds. Two speed wipers require a short, properly terminated jumper(included if you need it) No more reaching for the wiper knob every few seconds to clear the windshield, this unit takes care of it for you with its remotely located control. The control potentiometer contains an intergral on/off switch. The control can be installed into a 5/16" hole. Mounting can be up to three feet from the control box, your imagination is the limit. The module box weighs just a couple of ounces, how you fasten it under your dash is up to you(quality elec. tape, zip ties). As long as your wiper switch utilizes Packard 56 style connectors, then this should work for you. I use the correct connectors with correct crimps as shown. All crimps are now soldered. Completely assembled and ready to install. Video's: Pics: http://www.globalarray.net/user/twouvakind/DSC_0229.JPG http://www.globalarray.net/user/twouvakind/DSC_0230.JPG http://www.globalarray.net/user/twouvakind/DSC_0231.JPG http://www.globalarray.net/user/twouvakind/DSC_0233.JPG http://www.globalarray.net/user/twouvakind/DSC_0234.JPG http://www.globalarray.net/user/twouvakind/DSC_0235.JPG Member feedback on their installs: "The workmanship & detail looks exc. I can't wait to do an install. thanks again" "Yes. works great. thanks again. Hope you sell many of them on the board. They are definately worth the money. Finally, someone has come up with a intermittent wiper that is easily installed and works flawlessly on our trucks" "BTW your wiper delay works great! I love it." "Finally hooked mine up. It works great!! Thank you. I wouldn't dream of cutting my new harness. Your set up is plug and play!!!!" |
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
$ REDUCED!
To top |
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
Are you now making them with the switch external from the box?
|
Re: Windsield Wiper Delay
Quote:
|
Re: Windsield Wiper Delay
Dang. I like that a lot, I bought one from you that was the first design so is there any way to make the potentiometer switch external from the box? The unit works amazingly its just awkward reaching under the dash sometimes :lol:
Posted via Mobile Device |
Re: Windsield Wiper Delay
Thank you for your business, I will retro fit your unit with a pot for free. Send it back and just pay the freight both ways. LMK!
Quote:
|
Re: Windsield Wiper Delay
Quote:
|
Re: Windsield Wiper Delay
Quote:
|
Re: Windsield Wiper Delay
to top
|
Re: Windsield Wiper Delay
Don't become a "wouldashouldacoulda" when the rainy season(s) come, buy one today!
|
Re: Windsield Wiper Delay
to top
|
Re: Windsield Wiper Delay
Don't get left out, wouldashouldacoulda is a tough thing to mutter in that next drizzle event.
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
Pretty neat! Once my restore gets to that point i shall contact you!
|
Re: Windsield Wiper Delay
Have you received any customers install pics? Ie where they put the p-meter, and or what knob they used?
|
Re: Windsield Wiper Delay
Quote:
This thing is great, an 80s-90s Ford van wiper knob fit perfect, used a factory hole under the regular wiper switch. thanks. This came from a member in the 60-66 forum. I also had another member in 67-72 forum tapping(M7X0.75)a hole near his speed warning knob to install an alternative pot I offer. |
Re: Windsield Wiper Delay
Righhttt onn man!!
Thanks!! I shall contact you soon, im wanting to get a nex-gen when the time comes!! |
Re: Windsield Wiper Delay
Quote:
Plans are to mount the pot near the ws wiper switch, but on the same planes as the speed warning control cable Thanks for the help Bill on getting the thread size TTT |
Re: Windsield Wiper Delay
Awesome Jim, thanks for the clarification. I would like to see a pic of the finished install, if you don't mind! NP on the thread measurement, the folks that sell the modules were more than happy to accommodate.
Quote:
|
Re: Windsield Wiper Delay
Quote:
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
To top
|
Re: Windsield Wiper Delay
FYI: Please feel free to compare my $52 offering to LMC's $100+shipping offering. Get the strippers and cutters ready to install the latter.
|
Re: Windsield Wiper Delay
What types of payment do you accept ? Paypal ?
Thank you ! Tom |
All times are GMT -4. The time now is 08:20 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com