Wtb Greaseable np205 bolt 71/72
 

Like the title says looking for

Greaseable np205 bolt 71/72 it holds the shift stick to the shift rails.

Thank you

Re: Wtb Greaseable np205 bolt 71/72
 

Thanks I have tried classic also that is old post have read that before

To add to what I am looking for is

GM 14009313

Thank you

Re: Wtb Greaseable np205 bolt 71/72
 

bump still looking

Re: Wtb Greaseable np205 bolt 71/72
 

For the googly challenged: https://www.google.com/#q=GM+14009313+bolt
I always find it interesting that people are unable/unwilling to search the internet, or prefer to ask and wait rather than searching and getting answers is a second...

Re: Wtb Greaseable np205 bolt 71/72
 

One also has to be careful what one trusteth when he googleth. Perhaps Krex would prefer to go with something a bit more reputable, like a member. However, if you happen to successfully purchase one of these rather hard to find bolts for $3.19 (the first link in your search), and it arrives on your doorstep, I think we'd all love to hear about it. The second and third links show it as discontinued like just about every other place I've checked. I purchased one on here recently. Not cheap and not outrageous either, but I needed it, and I knew there was a human on the other end of it.

Krex, fwiw, the ones I've seen came with a hole that you would have to tap for the zerk - but it came with the zerk. I think it depends on date of manufacture for what you get with the part #. Good luck, hard to find gadget. My shifter rattles like crazy, haven't had a chance to install the bolt yet.

Re: Wtb Greaseable np205 bolt 71/72
 

I'll leave off the fake old English, but we pay /w credit card. No part; no pay.
I'd imagine that of 260 hits, one would have the part. I'm pretty sure there's another number due to the original being replaced as well.

Re: Wtb Greaseable np205 bolt 71/72
 

I have a few, but if I needed one and couldn't buy it, I'd probably get a bolt w/ the right length and thread, then locate a bronze bushing the right size, cut it in half and so on.

Re: Wtb Greaseable np205 bolt 71/72
 

NP205 Greasable Pivot Bolt

This is a custom made greasable pivot bolt for 205 twin stick applications. The bolt has two full circumference grooves with two grease passages per groove. It will work with GM or Ford kits - see the twin stick description as this bolt is included in some kits. If you are using this on any shifter other than mine



please verify that your shifter pivot hole is 3/4" in diameter. The picture shows the bolt on the end of grease gun with grease coming out of the dual passage grooves.

Price: $20.00 here is his website http://jkwoffroad.com/offroadproducts.php

Thanks for the unhelpful comment and for letting me know there was a website called google. Happy holidays! -Rex
Posted via Mobile Device

Re: Wtb Greaseable np205 bolt 71/72
 

I have searched google... The places that say they have the part number in stock do not

Re: Wtb Greaseable np205 bolt 71/72
 

Let me know if you have to give one up! :)

my set up is 71 k20 with np205 with TH350 adapter.

Thank you

Re: Wtb Greaseable np205 bolt 71/72
 

Do you know it this works for a 71 stick with the TH350 adapter?

Thank you

Re: Wtb Greaseable np205 bolt 71/72
 

That bolt is for a twin stick conversion. Going to be too long for your needs. Do you have a bolt now and just looking for a greasable bolt?

Re: Wtb Greaseable np205 bolt 71/72
 

blue k5 has it right. not what you need.. Did you try Dan's obsolete , he is always spendy but has a big warehouse. good luck

Re: Wtb Greaseable np205 bolt 71/72
 

Now I'm wondering if I have the right bolt Sutton in the box in my shelf!

Re: Wtb Greaseable np205 bolt 71/72
 

That's amazing, 10 pages, but it doesn't support the board members trying to sell parts

list me with the ones unable

actually, I need one of those twin stick bolts, thanks for posting up

Re: Wtb Greaseable np205 bolt 71/72
 

I do not have a bolt I need one.

Re: Wtb Greaseable np205 bolt 71/72
 

I was at a wrecking yard today, almost grabbed one. It did not have a grease zerk. I don't know why you couldn't drill a grease passage in it bolt without one and thread it for a zerk.

Re: Wtb Greaseable np205 bolt 71/72
 

Are you selling one or both? If you are let me know a price to 75023

You can pm or post thank you.

Re: Wtb Greaseable np205 bolt 71/72
 

If after you find a bolt, you need someone to drill and tap it, LMK as I can do it for you, if you don't have a lathe and drill press

Re: Wtb Greaseable np205 bolt 71/72
 

Have to ask - what is the desire for two stick conversions? Interesting website with some real nice quality parts in the link above, but why would one want independent control like that? Is it a rock crawler thing? Just curious.

Re: Wtb Greaseable np205 bolt 71/72
 

Yea its an off road thing, it's actually pretty useful when you get into certain sticky situations.. One useful thing is You can partially lock the emergency brake up and use the front wheel drive (rear wheels in neutral) to then pivot the front end to get around obstacles or what ever the case may be.

Re: Wtb Greaseable np205 bolt 71/72
 

OK, since I just ordered my twin stic pivot bolt my oem bolt is available for sale. looks new, never used. paypal 20.00 plus shipping

IT DOESN'T HAVE A ZERK, but I can fix it

Re: Wtb Greaseable np205 bolt 71/72
 

https://c5.staticflickr.com/1/480/30...6822c0e1_c.jpg[url=https://flic.kr/p/P9qons]20161221_102533[

Re: Wtb Greaseable np205 bolt 71/72
 

I'd be interested in buying the bolt, if you'd drill & tap it for the zerk fitting !

Of course after Krex !!!

Gary

Re: Wtb Greaseable np205 bolt 71/72
 

sure Gary, let me see where Krex goes with this

Re: Wtb Greaseable np205 bolt 71/72
 

Well Gary, I guess you're up, Krex hasn't PM'd or posted up. Just bought the zerks and tap today, but need some time...ho, ho and all the grandkids

Re: Wtb Greaseable np205 bolt 71/72
 

Hey Jim,

Take your time, I'm in no rush. Just let me know when you get around to it !

Gary

Re: Wtb Greaseable np205 bolt 71/72
 

Hold up that is what I need

Re: Wtb Greaseable np205 bolt 71/72
 

Hold up this is what I need

Re: Wtb Greaseable np205 bolt 71/72
 

I'll take it

Re: Wtb Greaseable np205 bolt 71/72
 

No problem Krex, it's all yours !!! I was in line behind you !

Gary

Re: Wtb Greaseable np205 bolt 71/72
 

I think I have one if you need, its from an 88 GMC though, not sure if anything has changed threw-out the years. I can measure it if you need me to

Re: Wtb Greaseable np205 bolt 71/72
 

Thank you sir, sorry I didn't get on in check had some family for an early xmas deal.

Re: Wtb Greaseable np205 bolt 71/72
 

notchbackgta

If you have one I'd be interested ! If it came off a truck with an NP205 it should be the same. The earlier ones were not greaseable !

Gary

Re: Wtb Greaseable np205 bolt 71/72
 

Gary, if you can find one, I can fix it for you...

Re: Wtb Greaseable np205 bolt 71/72
 

Jim, I do have a non-greaseable one, just don't have the necessary equipment to drill and tap it.

Gary

Re: Wtb Greaseable np205 bolt 71/72
 

send it down, I'll take care of it, bought a package of ten zerks

Re: Wtb Greaseable np205 bolt 71/72
 

finished the zerk install, part is certainly not new but serviceable
sending pm to krex

https://c1.staticflickr.com/1/309/32...e08d27f8_c.jpg[url=https://flic.kr/p/RknJGg]20170124_110104[