Parting out 72 GMC K20 4x4 350-TH350
5 Attachment(s)
I just finished parting this one out. A 72 GMC 3/4t 4x4. Most all metal parts have been hot tanked and acid dipped. Media blasting available at no cost on most parts. All prices are plus shipping. Thanks, Tom
NP205-TH350 transfer case. 200.00 Transfer case adapter w/coupler. 125.00 TH350 trans been rebuilt at some time. Nice fuild and clean pan. 250.00 Pic 1 Rear crossmember 40.00 intermediate cross member 45.00 front cross member 25.00 Transmission-transfer case cross member 65.00 cab frame mounts (2 fronts, 2 rears) 20.00 each front spring/core support mounts 35.00 each LH one is ruff have a good one. front spring rear shackle mounts 25.00 each front bump stops w/brackets 10.00 each front shock brackets 5.00 each front LH spring stop 10.00 forward rear spring hangers 30.00 each rear/rear spring hangers 25.00 each (only one in pic) Front u-bolts with plates 30.00 per side rear u-bolts w/plates 25.00 each Pic 3 rear bump stops w/brackets 12.50 each box supports 6 of them 10.00 each rear shock mounts 15.00 each rear e-brake cable brackets 5.00 each front exhaust hanger bracket 10.00 rear hyd brake line bracket 10.00 P/S steering conversion complete 125.00 steering intermediate shaft 25.00 steering rag joint 22.50 nice fan shroud, minor fan rub on top. can not see when installed 85.00 very nice original flex fan 10.00 AT pedal hanger and pedal 25.00 e-brake cables, support links, bracket, coulpers and spring. 45.00 transfer case support kit 45.00 trans-tcase rubber mount kit original 27.50 speedo cable minor blem in platisc 20.00 looks very nice L71-72 RH axle (large u-joint) 75.00 nice L71-72 LH axle (large u-joint) 75.00 nice draglink tight ends 25.00 heat riser nice springs works perfect original 25.00 crank pulley 12.50 water pump pulley 2 groove 15.00 Pic 2 oil line 8.00 tail gate hardware on box 25.00 tail gate hardware in gate complete w/bolts 45.00 GMC letters good chrome needs black repainted 15.00 GMC park lamp wiring 10.00 each nice condition heat stove pipe 12.50 washer hose set 12.50 tail lamp lens 10.00 nice condition fender-core support triangles 5.00 each door stricker plates 8.00 each Pic 3 door panel seal 5.00 door latch rods 3.00 each amber marker lenses 10.00 each nice color red marker lens 10.00 nice color GMC turn lens/housing 12.00 some fade vent pull rods w/knobs 5.00 each dome light switch wiring 10.00 fuel tank wiring 8.00 dome light wiring 10.00 inside door handle 5.00 window crank handles 6.50 each tight knobs tail lamp housings 10.00 each back up housings 7.50 each LH outside door handle very nice driver quality 25.00 RH outside door handle chrome peeling 8.00 oil filter adapter 8.00 dip stick sleeve 5.00 heater controls needs center lever I will replace it 45.00 window weather strip channels 10.00 each Misc pics C/K20 71-72 power brake conversion 65.00 base black door panels very nice outside one has broken spot for one retainer the other has two melted spots from me heating the nuts to get armrest off. It would still work just fine. 60.00 steering colum black 60.00 4x4 AT tunnel cover 40.00 |
Re: Parting out 72 GMC K20 4x4 350-TH350
5 Attachment(s)
more pics
|
Re: Parting out 72 GMC K20 4x4 350-TH350
I will take the flex fan . Pm thanks. zip code 92683
|
Re: Parting out 72 GMC K20 4x4 350-TH350
is this the one with the hubs i asked about? if so, in line
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Interested in the high hump A/T tunnel !
Do you have the top radiator metel pipe ? Drivers side door latch control ? The piece in the door the handle goes on . Gary |
Re: Parting out 72 GMC K20 4x4 350-TH350
Hello. I'm looking for a set of rear bumper brackets.donyou have a set? Shipping is to Miami, Florida 33176.
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Tom I'll take the front exhaust hanger bracket and speedo cable. Is the rear hanger there? Thanks, Pete
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Interested in gmc fender eyebrow trim pieces,t-case support (just need rubbers+bolts ?),and speedo cable if pete passes.shipping would be to 07719.
Thanks,Tom |
Re: Parting out 72 GMC K20 4x4 350-TH350
I'm interested in the top metal radiator pipe if you have one.
|
Re: Parting out 72 GMC K20 4x4 350-TH350
intrested in the trans crossmember, pm shipping to 77505 thanks JJ
|
Re: Parting out 72 GMC K20 4x4 350-TH350
How much for the rear cab mount boltts?
|
Re: Parting out 72 GMC K20 4x4 350-TH350
I'll take the steering rag joint. Shipped to Sparks, NV 89441. PM sent. Thanks, Dan
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Do you still have the center tie rod that connected left knuckle and right knuckle? About 56" long with a tiee rod on each end.
Thanks, 72 |
Re: Parting out 72 GMC K20 4x4 350-TH350
In pic#3, I'll take the 2 window weather strip channels @ $10 each. PM me so I can pay and get shipping to 43357. Thanks, Jim
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Also, would you have the 2 channels that the window glass in resting in? I need those also. Thanks, Jim
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Hang tight guys I'm at work till 5:00 and I'll catch up then. Thanks, Tom
|
Re: Parting out 72 GMC K20 4x4 350-TH350
I will take e-brake cables,supports, etc for 45.00 also e-brake rear brackets and rear hyd brake line bracket let me know a total shipped to 48817 thanks Mike also would you consider seperating the bump stops from the brackets?
|
Re: Parting out 72 GMC K20 4x4 350-TH350
What would be the cost of the fan shroud shipped to 98328? Thanks:metal:
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Second on the center ebrake cables. In line for top radiator pipe..
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Just to clarify, being a GMC the e-brake cable is probably for a Dana 60 rear not an Eaton HO 52?
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Shipping is via UPS and is actual cost. I have a daily pick up so that's what works for me. USPS on small items in flat rate boxes and or padded envelopes.
gmclonghorn, pm coming gmc 2500 4x4 Paul, No..that's the 72 Sub K20. I will have it this Friday. Don't worry your in first place on them. CUSTOM/10 Gary, nothing on the upper rad pipe. I Should have the relay 10.00 for a good one. dec010974, Nothing right now on the sport rear bumper brackets. DeadheadNM Pete, I can't recall. Let me look on the frame chunks. I'll start a pile for you. mx289,The RH is a nice driver with a screw hole at the very bottom tip, 20.00. The LH is rusty towards the top 5.00. I plan to keep the t-case support complete. 16.07 shipping if you want all of it. Some PMed me for a pair of these and I cleared out PM's and lost who it was. For who ever that was my apology. 20HDriver, Sorry nothing right now. blackbolt, JJ Shipping is 32.70 it weighs 28lbs 72swbcamo, 11.00 shipped karphan, Dan, 6.00 shipping 72longbed, Yes 85.00 plus shipping allons, Shipping for all of it 19.94 and 20.00 for the channels that attach to the glass. cst204x4,Shipping 24.61 freakshow108, Shipping is 27.40 With packing it is 32x22x11 which is oversize. |
Re: Parting out 72 GMC K20 4x4 350-TH350
Thanks for getting back to me, but I'm gonna pass on the package.
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Pete, yes it was a D60. Would it matter? Wouldn't this portion be the same? I have a couple HO72 4x4's that I could compare it. Thanks, Tom
|
Re: Parting out 72 GMC K20 4x4 350-TH350
hi,intermediate cross member. large one in front of leaf spring hangers also power steering set up as well, but may be to much to ship! pa 19320 thanks
|
Re: Parting out 72 GMC K20 4x4 350-TH350
What about the 4x4 AT tunnel cover, what kind of shape is it in ? Any rust, or extra holes ?
Gary |
Re: Parting out 72 GMC K20 4x4 350-TH350
Quote:
|
Re: Parting out 72 GMC K20 4x4 350-TH350
I'll take the steering rag joint. Pm sent for payment info. Thanks, Dan
|
Re: Parting out 72 GMC K20 4x4 350-TH350
jimer1964..I'll get shipping cost tomorrow.
CUSTOM/10 Gary, It has no extra holes and some minor surface rust on the underside as the pic shows. In my opinion it is a very nice piece. DeadheadNM Pete, Just home from the shop. The cables coming out of the backing plates may be different but i'm thinking the rest is the same. I'll look at my 72 K20 HO72 in the morning. To cold and dark tonight.;) |
Re: Parting out 72 GMC K20 4x4 350-TH350
Can I get closer pictures of the rubber bushings for the transfer case support? Also, can I get the two large bolts on the transfer case that go through the support bracket?
|
Re: Parting out 72 GMC K20 4x4 350-TH350
5 Attachment(s)
more pics
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Is the rear crossmember the same for 1/2 2wd and 3/4 4x4?
Would you do $40 shipped to 97115 on the crossmember? |
Re: Parting out 72 GMC K20 4x4 350-TH350
I'll take the trans crossmember and the trans mounts pm me details of payment thanks JJ
|
Re: Parting out 72 GMC K20 4x4 350-TH350
I'll take the Tunnel cover and a good 72 DS door relay if you have one. PM me the total & payment info when your ready.
Gary |
Re: Parting out 72 GMC K20 4x4 350-TH350
After seeing the closer pics of the TC support, I would like to take it if I am up. I would like the two mounting in the TC too. If the transfer case mounting bushings get to me I will take those too.
Any exhaust manifolds? |
Re: Parting out 72 GMC K20 4x4 350-TH350
Payment made for the steering rag joint. PM'd address too. Thanks, Dan
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Are you selling the cab?
|
Re: Parting out 72 GMC K20 4x4 350-TH350
Quote:
|
Re: Parting out 72 GMC K20 4x4 350-TH350
68shortfleet, no they are different. I have many of the 2wd's. Yes 40.00 would be fine shipped. PM me your year and model to be sure I get you the correct one.
blackbolt, PM sent CUSTOM/10 Gary, Sorry I don't have a relay for the 72 only. I need your addy for the shipping cost on the tunnel cover. mx289 Tom, You are first on the t-case support so it is yours. Not sure on the mounting clips if not I'll look for some and include them if I have them. jmader, the cab is junk and ready for the scrap yard. I have a nice 71 cab that needs rockers and maybe a portion of floor near the rockers. It is a 4sp non AC. 250.00 on it. John H., mx289 was first on the t-case support set up. The good news is I have another set up identical to this one with the bolts and the trans/t-case mounts as well. Same prices and pics available. karphan, Thanks! sboris, still waiting on cst204x4. I'll give him till tomorrow. Jimer1964, Shipping on the cross member is 24.26, P/S conversion is 57.10, If I ship them together it would be 71.87. I looked and compared the e-brake set up to a 72 K20 with the HO72 and it is the same. DeadheadNM Pete, Your shipping with UPS is 15.05 I owe you a break from the deal we did recently so 7.50 shipping. |
Re: Parting out 72 GMC K20 4x4 350-TH350
Tom, thanks not necessary but OK - total looks to be $37.50? PM paypal when poss.
Good to know the D60 cable is similar to HO52! Best, Pete |
Re: Parting out 72 GMC K20 4x4 350-TH350
tom, was ps pump a leaker? pm payment info
|
All times are GMT -4. The time now is 08:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com