67 Big window ta2 inspired race truck
4 Attachment(s)
Hey guys, I know its not for everyone but it's been my dream to combine race car components into a c10 build. Ive had this dream for the last 15 years. Recently just decided to go for it. I'll update as i can but this being my dream build may take some time. Plan is rolling chassis before winter here. Im off to a decent start.
Start with a simple chassis jig to build the frame up from. |
Re: 67 Big window ta2 inspired race truck
4 Attachment(s)
Next up collecting parts.
Ordered a front and rear clip from TA2 Trans am series. |
Re: 67 Big window ta2 inspired race truck
5 Attachment(s)
Still collect parts here. Winters quick change with unequal tubes (changed to equal length tubes. Used wildwood hubs, the front lower a arms strut rods spindles and upper arms were collected. Also started mocking up a wheelbase and general plan for the chassis. Ended up deciding on a 110" wheelbase
|
Re: 67 Big window ta2 inspired race truck
5 Attachment(s)
started to assemble the front suspension, still messing with wheelbase at this time, also starting to mock up the cab.
|
Re: 67 Big window ta2 inspired race truck
5 Attachment(s)
Mocked up the front sheet metal to eye ball the wheelbase at least also to check proportions, then went with new steel axle tubes for the wide 5 hubs going to run 15x12 rear wheels with about a 4" backspace. Started mocking up the first part of the three link, will also add watts link later.
|
Re: 67 Big window ta2 inspired race truck
5 Attachment(s)
Chassis is welded at this point, wheelbase is set, waiting on tubing to build cage, and build x member before much else. Engine is boost ready, LC9 5.3 with SBE gapped and ready to go, used for mock up for now, love the engine placement should be good for weight distribution and on that pic cab is a bit forward for front wheels so should go back just a few more inches into the cab. This takes me to about where I'm at now, waiting on tubing and parts to keep going. Likely do cab corner and rockers this next week. Sheet metal will have no structural component to the build so ill likely mount the cab straight to the rockers and make it removable too incase it gets bashed up.
|
Re: 67 Big window ta2 inspired race truck
Nice work.
I am following along.:metal: . |
Re: 67 Big window ta2 inspired race truck
Talking about "ground up"! Count me in for the ride:metal::mm::chevy:
|
Re: 67 Big window ta2 inspired race truck
3 Attachment(s)
Thanks for following along guys. Wasn't sure how this build would be received. Building this one for me so figured id do it anyway. Ive done the factory builds for awhile just wanted to change it up some. Heres the shock hoops in, adjustable for ride height without messing with preload on the shocks. Pretty cool. Going to be doing cab corners, rockers inner and outer soon. Then going to cut out the firewall and floor attaching the cab to inner rockers, and ultimately to the cage as well. More to come. PS. don't mind my fancy shock simulators or even better the tie rod ends.
|
Re: 67 Big window ta2 inspired race truck
Looking Good.:metal:
. |
Re: 67 Big window ta2 inspired race truck
Very NICE!!!!!
|
Re: 67 Big window ta2 inspired race truck
3 Attachment(s)
Some more progress. Waiting on the other pair of tires in the am. Doing rockers and corners here too and then be mounting the cab at the rockers to the chassis.
|
Re: 67 Big window ta2 inspired race truck
Impressive.
Curious about one thing - why a steel cab? Why not a lightweight fiberglass cab? Is it a race truck or a street truck? |
Re: 67 Big window ta2 inspired race truck
Quote:
|
Re: 67 Big window ta2 inspired race truck
OH yeah! I am in!
|
Re: 67 Big window ta2 inspired race truck
1 Attachment(s)
Floor gone. Rockers temp in. Checking door gaps then weld them in. More mock up.
|
Re: 67 Big window ta2 inspired race truck
Definitely following along👏🏻👏🏻👏🏻
|
Re: 67 Big window ta2 inspired race truck
Very cool , I’m in
|
Re: 67 Big window ta2 inspired race truck
1 Attachment(s)
Roller now.
|
Re: 67 Big window ta2 inspired race truck
Dude, just slapped together, that's stance for days! This is gonna be goooood!
|
Re: 67 Big window ta2 inspired race truck
1 Attachment(s)
More progress on the rear cage, main hoop, harness bar and first down bar. More to come later this next week should be done with cage.
|
Re: 67 Big window ta2 inspired race truck
Tagged in & will be watching for future updates. Very cool project!
|
Re: 67 Big window ta2 inspired race truck
I'm in for this build too, nice work, gonna be awesome. :flag: :burnout:
:nx: |
Re: 67 Big window ta2 inspired race truck
Count me in for this one!! Way cool!!
|
Re: 67 Big window ta2 inspired race truck
2 Attachment(s)
More cage work then a gen 5 lt l83 engine from a 2015 Silverado. Waiting on a few parts.
|
Re: 67 Big window ta2 inspired race truck
Same engine I'm using... If my memory serves me its 385 Horse and 385 torque. Are you planning on any power adders? :metal:
|
Re: 67 Big window ta2 inspired race truck
Quote:
Thanks. L83 is a great engine. About the same performance of the older 6.0. Richard Holdner did a great youtube video on it at a west tech dyno. Seems to be the next evolution of the swap. |
All times are GMT -4. The time now is 01:58 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com