The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   PA So 1 more 72 blazer going under the knife (https://67-72chevytrucks.com/vboard/showthread.php?t=699579)

1rippen6 03-01-2016 11:05 PM

So 1 more 72 blazer going under the knife
 
5 Attachment(s)
72 blazer body is shot and frame is spoken and seat are gone everything else is still available. Trying to sell the engine local so will not remove anything from that until I pull it. Just ask and I will get prices and pictures. My laptop is down right now so I am using my desk top so please give me time to respond makes things a little harder.

Parchment visors 80 plus shipping SOLD
Parchment seat belts fronts stained 80 shipped.SOLD
Nice fuel filler cover 60 plus shippingSOLD
rear floor section at tailgate 30 a square foot about 3 foot of it is nice.
radio section 50 plus shipping
top brackets 4 pcs 58 shippedSOLD
hatch struts 90 shippedSOLD

1rippen6 03-01-2016 11:06 PM

Re: So 1 more 72 blazer going under the knife
 
5 Attachment(s)
more pics

1rippen6 03-01-2016 11:07 PM

Re: So 1 more 72 blazer going under the knife
 
1 Attachment(s)
last one

MikeCofield 03-01-2016 11:11 PM

Re: So 1 more 72 blazer going under the knife
 
Any tow hooks , leveling mats ? And how much is the luggage rack

MikeCofield 03-01-2016 11:14 PM

Re: So 1 more 72 blazer going under the knife
 
And how much on the hump

1rippen6 03-01-2016 11:15 PM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by MikeCofield (Post 7505796)
Any tow hooks , leveling mats ? And how much is the luggage rack

Sorry no tow hooks or leveling mats let me look at the rack tomorrow and get some pictures and will figure out a price then. Auto high hump 60 plus shipping if interested send me you zip and I can get a quote.

MikeCofield 03-01-2016 11:45 PM

Re: So 1 more 72 blazer going under the knife
 
36260

stick72 03-02-2016 07:23 AM

Re: So 1 more 72 blazer going under the knife
 
I would be interested in the tailgate seals, mine are pretty bad. Zip is 37064

Thanks

richard2717 03-02-2016 08:07 AM

Re: So 1 more 72 blazer going under the knife
 
How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

Ta12sec 03-02-2016 08:19 AM

Re: So 1 more 72 blazer going under the knife
 
How's the grill surround?

1rippen6 03-02-2016 08:29 AM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by stick72 (Post 7506078)
I would be interested in the tailgate seals, mine are pretty bad. Zip is 37064

Thanks

I will take them off tonight and get some pictures and price.

1rippen6 03-02-2016 08:31 AM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by richard2717 (Post 7506091)
How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

The one tub doesn't look bad at first glance but let me get them removed and check it out and the floor.

1rippen6 03-02-2016 08:32 AM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by Ta12sec (Post 7506098)
How's the grill surround?

Surround doesn't have any holes but does have some dents in the bottom will try and get some pictures tonight.

jimer1964 03-02-2016 08:38 AM

Re: So 1 more 72 blazer going under the knife
 
Hi, Interested in the visors can you put up some pictures when you get time? Thanks

bluek5 03-02-2016 09:40 AM

Re: So 1 more 72 blazer going under the knife
 
How is the passenger door, inner grille?

JMac11 03-02-2016 10:09 AM

Re: So 1 more 72 blazer going under the knife
 
Problems with the top?? How close to Charleston WV?

Beau2a 03-02-2016 10:21 AM

Re: So 1 more 72 blazer going under the knife
 
Do you have the cam and return spring from the hatch handle? Zip is 98116

1rippen6 03-02-2016 10:42 AM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by jimer1964 (Post 7506115)
Hi, Interested in the visors can you put up some pictures when you get time? Thanks

Will get some pictures tonight

Quote:

Originally Posted by bluek5 (Post 7506172)
How is the passenger door, inner grille?

PS door is junk inner grill has at least one crack

Quote:

Originally Posted by JMac11 (Post 7506193)
Problems with the top?? How close to Charleston WV?

I'm about 4.5 hours for Charleston looks like 300 miles exactly I'm in Greencastle PA if you want to check it out.

Quote:

Originally Posted by Beau2a (Post 7506201)
Do you have the cam and return spring from the hatch handle? Zip is 98116

I have someone interested in the top and another interested in just the hatch will let you know how that goes.

Beau2a 03-02-2016 10:45 AM

Re: So 1 more 72 blazer going under the knife
 
Thanks

1rippen6 03-02-2016 11:11 AM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by Beau2a (Post 7506231)
Thanks

I just found one the spring is a little bent but should work fine will post some pictures later today

ochre 72 03-02-2016 01:41 PM

Re: So 1 more 72 blazer going under the knife
 
I'm interested in the fuel filler neck cover. How much would shipping be to 30114

dutchmanz 03-02-2016 01:44 PM

Re: So 1 more 72 blazer going under the knife
 
looks like a double wall top. What shape is it in? Mine was involved in some storm damage last week and may not be worth fixing...

Heliarcn 03-02-2016 02:15 PM

Re: So 1 more 72 blazer going under the knife
 
Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures.

29od1 03-02-2016 02:45 PM

Re: So 1 more 72 blazer going under the knife
 
How much for the bucket seat cross brace shipped to 67210?
Thanks,
David

Ridnhi 03-02-2016 03:31 PM

Re: So 1 more 72 blazer going under the knife
 
How is the inside of the tailgate? I need a gate to repair mine.

1rippen6 03-02-2016 03:41 PM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by ochre 72 (Post 7506438)
I'm interested in the fuel filler neck cover. How much would shipping be to 30114

Will get you a quote this evening

Quote:

Originally Posted by dutchmanz (Post 7506442)
looks like a double wall top. What shape is it in? Mine was involved in some storm damage last week and may not be worth fixing...

I have 2 decent tops setting in the yard 250 without a hatch I don't have any decent hatches

Quote:

Originally Posted by Heliarcn (Post 7506476)
Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures.

Will get you pictures tonight none of it is good shape

Quote:

Originally Posted by 29od1 (Post 7506499)
How much for the bucket seat cross brace shipped to 67210?
Thanks,
David

Sorry David wish I had 100 of them promised this one back to the guy I bought the blazer off of

Quote:

Originally Posted by Ridnhi (Post 7506557)
How is the inside of the tailgate? I need a gate to repair mine.

Will get you pictures tonight but I know the bottom is gone if that is what you are looking for

k5blazin 03-02-2016 08:01 PM

Re: So 1 more 72 blazer going under the knife
 
Interested in the fan shroud if it's not damaged!

1rippen6 03-02-2016 10:20 PM

Re: So 1 more 72 blazer going under the knife
 
5 Attachment(s)
Quote:

Originally Posted by MikeCofield (Post 7505800)
And how much on the hump

High hump is 29 for shipping luggage rack is complete no broken pieces will need rechromed to be nice 80 plus shipping I should have taken a picture of the high hump but no issues no bad rust or pitting.

1rippen6 03-02-2016 10:24 PM

Re: So 1 more 72 blazer going under the knife
 
2 Attachment(s)
Quote:

Originally Posted by stick72 (Post 7506078)
I would be interested in the tailgate seals, mine are pretty bad. Zip is 37064

Thanks

These are pretty bad also look at pictures if still interested I can get you a quote

1rippen6 03-02-2016 10:27 PM

Re: So 1 more 72 blazer going under the knife
 
1 Attachment(s)
Quote:

Originally Posted by richard2717 (Post 7506091)
How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

There may be some usable pieces there but will have to give me a couple of days to get that far on disassembly. Would you still be interested in the wheel tub if it has roll bar holes?

1rippen6 03-02-2016 10:28 PM

Re: So 1 more 72 blazer going under the knife
 
3 Attachment(s)
Quote:

Originally Posted by Ta12sec (Post 7506098)
How's the grill surround?

Grill has dents the whole way around it.

1rippen6 03-02-2016 10:32 PM

Re: So 1 more 72 blazer going under the knife
 
3 Attachment(s)
Quote:

Originally Posted by jimer1964 (Post 7506115)
Hi, Interested in the visors can you put up some pictures when you get time? Thanks

I washed both sides the each on has some staining on one side. It may clean up with some good cleaner like spray 9 but don't know the only thing I used was comet. There is a rip on the one next to the mounting bracket.

1rippen6 03-02-2016 10:34 PM

Re: So 1 more 72 blazer going under the knife
 
1 Attachment(s)
Quote:

Originally Posted by bluek5 (Post 7506172)
How is the passenger door, inner grille?

Pictures of the cracks

1rippen6 03-02-2016 10:35 PM

Re: So 1 more 72 blazer going under the knife
 
2 Attachment(s)
Quote:

Originally Posted by Beau2a (Post 7506201)
Do you have the cam and return spring from the hatch handle? Zip is 98116

Here you go

1rippen6 03-02-2016 10:36 PM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by ochre 72 (Post 7506438)
I'm interested in the fuel filler neck cover. How much would shipping be to 30114

Shipping is 14 let me know if still interested.

stick72 03-02-2016 10:37 PM

Re: So 1 more 72 blazer going under the knife
 
Thanks for checking on the seals, mine are in slightly better shape

1rippen6 03-02-2016 10:40 PM

Re: So 1 more 72 blazer going under the knife
 
5 Attachment(s)
Quote:

Originally Posted by Heliarcn (Post 7506476)
Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures.

The 2 females have bad staining as you can see the 2 retractables are decent but the cover on the long one is bad. The one female buckle is broken if still interested make me an offer on the belts. Door panels are very chalky DS no extra holes PS plenty of extra holes if interested will be very cheap.

1rippen6 03-02-2016 10:43 PM

Re: So 1 more 72 blazer going under the knife
 
5 Attachment(s)
Quote:

Originally Posted by Ridnhi (Post 7506557)
How is the inside of the tailgate? I need a gate to repair mine.

Inside not so good outside a little better

richard2717 03-02-2016 11:10 PM

Re: So 1 more 72 blazer going under the knife
 
Quote:

Originally Posted by 1rippen6 (Post 7507235)
There may be some usable pieces there but will have to give me a couple of days to get that far on disassembly. Would you still be interested in the wheel tub if it has roll bar holes?

No rush here. As long as the mounting flanges are good and not beat all up I can work with the extra holes. Would all depend on price and I could wait till you come to va this summer if needed

Beau2a 03-02-2016 11:31 PM

Re: So 1 more 72 blazer going under the knife
 
I'll take it.


All times are GMT -4. The time now is 09:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com