"G&S project"
4 Attachment(s)
HELLO
this is my brother's old work truck It was a faithful old truck for many years. This past summer, had a small engine fire, nothing major, the truck still ran. Our nephew came up from south Alabama, asking if he could have the truck. My brother told him he could, if he would get it road worthy: License, insurance, etc. During this time, he decided to buy an '81 Silverado shortbed, and began stripping this truck for parts. Left us missing distributor cap, rotary button, coil, the starter, starter bolts, carburetor, carburetor bolts, passenger side door handle bazle, window crank. We have managed to get everything but the carburetor, and bolts, and starter bolts. Being disabled and on a fixed income, this hasn't been easy. And wish me luck, cause Lord knows, I'm gonna need it. We're fixing this truck up for my brother's son, so we'll have a vehicle here while he's at work. Since this build was started, my stepfather, my brother's father and my nephew's grandfather, has passed away. We are dedicating this in his honor. A couple of months before he passed away, he came over and looked at the truck, said he liked that, and looked at me and said, "I taught you well, didn't I boy?" Also said it needed a bigger motor, so we're working on that. Thanks for reading.. Attachment 633364 Attachment 633785 |
Re: It ain't over till it's over.
:welcome2: FROM KNOXVILLE TN!!!
|
Re: It ain't over till it's over.
:welcome2: to the board from Mid-MO!!!
You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more. |
Re: It ain't over till it's over.
Welcome from FT Worth TX.
|
Re: It ain't over till it's over.
Hey welcome to the greatest boards around from MT. That's awesome that your going to fix the truck up for your bros son. Too bad you were not closer I could find you a carb. Good luck with the project bud!
|
Re: It ain't over till it's over.
Thank everyone for your kind response.
|
Re: It ain't over till it's over.
Welcome to the board from Texas
|
Re: It ain't over till it's over.
:gmc2: any ideas where I can pick one up?:gmc2:
|
Re: It ain't over till it's over.
:welcome2: from OKC!
|
Re: It ain't over till it's over.
Welcome to the board!!
Have you priced a reman'ed carb through someone like AutoZone or someplace similar? I have purchased some in the past for @ $125 and they worked great. Not sure what you're looking to spend but it's not a bad deal imo. Good luck with it. |
Re: It ain't over till it's over.
Welcome to the board from South Mississippi!:D
|
Re: It ain't over till it's over.
Welcome!
$125 reman is as good as it's gonna get unless you know a guy who can rebuild your junkyard carb. Rebuilds are super-cheap, though, under$50 for sure...with the book on how to do it! |
Re: It ain't over till it's over.
$125 reman not here all over 225 :waah:@ AutoZone or similar place
has anyone had any thing to do with this site rebuilt carburetors looks like good deals on Holley carburetors |
Re: It ain't over till it's over.
The "cheap" one at AutoZone is a Quadrajet universal replacement, manual choke carb. It will not be exactly like the original, but you should be able to make it work.
As for the link... never used them. Good luck. |
Re: It ain't over till it's over.
Well thank you sir, but in the northern part of Alabama, you can't buy a lawn mower carburetor for $125 at Auto Zone. To make sure I haven't missed anything, I was doing my searches online. Easier for me that way, being disabled, I was just on the phone with Auto Zone and the cheapest carburetor that they could offer me was $345, thats including a $40 core charge of course, but that's still quite a ways from $125. But I do appreciate the effort. But I have some relatives in South Alabama. What Auto Zone do you go to? I'll send them there lol.
|
Re: It ain't over till it's over.
WELCOME to this board. Baytown,TEXAS!!
|
Re: It ain't over till it's over.
Wow! $345? You'd be better off buying a brand new holley for that price...check these summit racing prices:
http://store.summitracing.com/partdetail.asp?... |
Re: It ain't over till it's over.
:welcome2: from Knoxville Tn.....
|
Re: It ain't over till it's over.
Well, we managed to get a Edlerbrock 4-barrel, a decent set of tires and rims, and a tube grill insert all for $185. We'll post pictures later on as my camera's batteries are dead when it rains and pours:smoke:
|
Re: It ain't over till it's over.
Welcome to the board from NC!
|
Re: It ain't over till it's over.
1 Attachment(s)
Boy it's been rough trying to get everything done out of a two bedroom apartment. We managed to get it in prime, fabricate two new door panels, put bucket seats, new rear bumper, alarm system, stereo system, carpet, new fuel pump. Got it on the road and running, still needs to be painted and some minor tweaks. But everything is looking good. I have truly enjoyed reading a lot of the project pages and viewing the different photos of the sweet looking trucks that some of the people here have. Some day mine will look as good as their's. But it just takes time, doesn't it? We'll have more photos later on.
[Attachment 625464 |
Re: It ain't over till it's over.
Welcome! Looks like you're making good progress. Keep it up and keep sharing pics!
|
Re: It ain't over till it's over.
Knoxville, I'd love to get to Knoxville someday. It would feel like my town, lol. Seeing as my last name is Knox.
|
Re: It ain't over till it's over.
Welcome to the site.
|
Re: It ain't over till it's over.
1 Attachment(s)
little teamwork
Attachment 628553 |
Re: It ain't over till it's over.
good looking project, it looks like you've made some good progress. Also, welcome from Nor-Cal!
|
Re: It ain't over till it's over.
Good job, welcome from Western Kentucky.
|
Re: It ain't over till it's over.
Welcome to the site from Big Sandy, West Tennessee.
|
Re: It ain't over till it's over.
2 Attachment(s)
|
Re: It ain't over till it's over.
1 Attachment(s)
We decided to pull the bed so we can paint frame and the back of the cab also made it easier to run the exhaust
http://nb-productions.com/img/0/HPIM0297.JPG http://nb-productions.com/img/0/HPIM0255.JPG new rear bumper and that didn't work out so well a visitor to the apartment complex ran in to the rear of the truck and pushed it into the car next to it Attachment 622568 http://nb-productions.com/img/0/HPIM0300.JPG we cut the bumper down to fit like and roll pan cut the front coil springs and move the rear leaf hanger bolts up for a 2/3 drop http://nb-productions.com/img/0/HPIM0261.JPG http://nb-productions.com/img/0/HPIM0267.JPG |
Re: It ain't over till it's over.
3 Attachment(s)
|
Re: It ain't over till it's over.
Welcome from MI. Nice lookin truck you've got for a budget build. Not that you'll need it now that it's running, but Summit has their own brand carb, I think something like $225 brand new for an out of the box runner. Good luck with the rest of the build:uhmk:
|
Re: It ain't over till it's over.
Welcome to the board! If y'all need assistance I'm up in HazelGreen.
|
Re: It ain't over till it's over.
Thanks Guys
Quote:
|
Re: It ain't over till it's over.
some shiny stuff
http://nb-productions.com/img/0/HPIM0304.JPG heres the bumper we recut to make the rollpan. still have a little welding to do http://nb-productions.com/img/0/HPIM0305.JPG 0ne of 3 subwoofers http://nb-productions.com/img/0/HPIM0252.JPG |
Re: It ain't over till it's over.
Taking it back down to metal
http://nb-productions.com/img/tp/HPIM0293.JPG http://nb-productions.com/img/tp/HPIM0286.JPG column we picked up for free to replace the old one http://nb-productions.com/img/tp/HPIM0250.JPG |
Re: It ain't over till it's over.
Late Welcome from Mascot TN. Lookin good!
|
Re: It ain't over till it's over.
thanks
here are the test fit of da door panels made from 2x4s. was a color change, and padding added. try to get pictures of that soon http://nb-productions.com/img/0/doorold.gif |
Re: It ain't over till it's over.
1 Attachment(s)
be4
Attachment 631072 bucket seats out of are moms 1999 Chrysler Town & Country van http://nb-productions.com/img/0/HPIM0312.JPG da shag carpet http://nb-productions.com/img/0/carpet.gif We also got the consoles put together and primed. They're outside drying. It's just too hot for me to go out there. Heat index is over 115. I'll get some pictures of those later. Tell me what you think. |
Re: It ain't over till it's over.
3 Attachment(s)
|
All times are GMT -4. The time now is 08:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com