![]() |
WTB: NOS Sail Panel 64-66
Looking for a NOS Sail Panel for a 64-66 DRIVERS SIDE only. Thanks!
|
Re: WTB: NOS Sail Panel 64-66
Ttt
|
Re: WTB: NOS Sail Panel 64-66
Floating back to the top....
|
Re: WTB: NOS Sail Panel 64-66
ttt...
|
Re: WTB: NOS Sail Panel 64-66
trying again.
|
Re: WTB: NOS Sail Panel 64-66
Sorry what does NOS stand for ? I have a 65 that i am parting out with good sail panels.
|
Re: WTB: NOS Sail Panel 64-66
[QUOTE=kcjonesmeow;7165082]Sorry what does NOS stand for ? I have a 65 that i am parting out with good sail panels.[/QUOTE
NOS New Old Stock. Meaning part has never been used although it might show some shelf wear. |
Re: WTB: NOS Sail Panel 64-66
Throwing a line out there again. Any drivers side, NOS sail panels?
|
Re: WTB: NOS Sail Panel 64-66
you are going to have to try Ebay for that I'd think....not too easy to find only one
|
Re: WTB: NOS Sail Panel 64-66
Throwing a line out there again. Thx.
|
Re: WTB: NOS Sail Panel 64-66
I agree with GMCNUT. You'll probably have better luck with ebay. More than likely someone around here who has NOS parts would rather hang on to them...Not that I blame them.
|
Re: WTB: NOS Sail Panel 64-66
The 64-66 sails are made of aluminum and will polish out very nice if you find a decent OEM set. NOS will be very hard to find, especially just a driver side. Has been several years since I've seen any NOS sail panels and they are always in sets.
I understand wanting NOS though and good luck on the search. |
Re: WTB: NOS Sail Panel 64-66
Yeah, I'm keeping an eye on ebay but still fishing here, too. I found one. Surely there's another out there somewhere!
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
I found a NOS left sail panel about 5 years ago. Never have been able to find the right one. Good luck
|
Re: WTB: NOS Sail Panel 64-66
Still hunting for an NOS drivers side sail panel. Anyone?
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
Taking another shot at it....
|
Re: WTB: NOS Sail Panel 64-66
Sodly, as a collector of NOS GM truck parts, I hate to see you keep beating your head against a brick wall for no more gain than it would get you in the case of the upper cab mouldings. I can tell you that I have learned the hard way which ones were not worth buying over reproductions, and these upper cab mouldings are one of those things. Some items are simply "done right" and when they are, they should be considered. I recommend you buying a repro set, and then selling the one NOS one you have - its a wiser move and you will be very happy with the reproductions. I have both and you cannot tell them apart. Just my two cents
|
Re: WTB: NOS Sail Panel 64-66
1 Attachment(s)
Don't know if this helps but I seen this on c10era 60_66 Facebook page.
|
Re: WTB: NOS Sail Panel 64-66
Holy moly....I can't believe my eyes! Sodly, this is a dream come true for you!
|
Re: WTB: NOS Sail Panel 64-66
300 for a pair Sodly - checking to see if they will sell you just the one single one you want
|
Re: WTB: NOS Sail Panel 64-66
Ok, Now that's funny! NEVER say never.
|
Re: WTB: NOS Sail Panel 64-66
I contacted this guy for you Sodly asking about him selling you just the one - we'll see what he says
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
Unbelievable.
|
Re: WTB: NOS Sail Panel 64-66
Quote:
As for my occasional WTB ad, I know it's a long shot. But I found one so there are probably others out there. |
Re: WTB: NOS Sail Panel 64-66
Sodly, I hate to say it but we simply found out about these NOS mouldings too late. He sold every set he had in 45 minutes according to the page moderator. Sorry - I tried to immediately jump in on your behalf when I saw the post on here, but it was already too late....
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
Well , if made in USA Id really like proof on that. Yes I see some things done that way. My hats off to Mar-K for their products , but the Truck Shop I don't think so. Not bad mouthing them at all. I've had to use a couple things from them but being a purist I see many differences in fit and finish that are too far off. Their Bumpers front and rear are good looking till you fit them. I doubt very much that the repop sail panels are USA made but Im listening ? Sorry but my pride in my own stuff gets in the way of saving money . Most every aftermarket aluminum molding made is dead soft as compared to original. You can squeeze a reproduction Dynacorn wheel opening molding flat with two fingers , same with stainless windshield molding , these are cars I'm speaking of. A guy I know bought four sets of each just to get one good set for a 66 Impala. It has its place and satisfies a market , I would rather use nice used in this case for Sodlys truck. Other than tires its original. You know theres a difference when all those NOS sail panels sold in 45 minutes !
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
Quote:
|
Re: WTB: NOS Sail Panel 64-66
As we know they will keep making crap because people keep buying crap. Its all about Money
|
Re: WTB: NOS Sail Panel 64-66
Did anyone hear where these came from, or where they have been for the last 40 years or so?
|
Re: WTB: NOS Sail Panel 64-66
Giving it another shot here. Anybody have a NOS drivers side sail panel for sale?
|
Re: WTB: NOS Sail Panel 64-66
I have a set of used sails panels not new and will sell as a set if your interested
|
Re: WTB: NOS Sail Panel 64-66
Thanks but I need NOS.
|
All times are GMT -4. The time now is 12:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com