the panelburb getting cut up
2 Attachment(s)
I will be cutting this one up pretty soon. I suspect there is a lot of bondo bc there is a lot of rust in this thing so I will have to check it out as we go. Cuts will start at $25 plus shipping and go from there. I have already gutted most of this but let me know what else you might need and I will see if I can help out. The front 3 doors have some rust in them but does not appear to be too terrible. The barn doors are shot and the lock pawl is already gone. I believe the front doors are 67 model (at least the wing windows)
Would like to keep the hinges with the 3rd door for now. All of the glass was custom tinted (inside the glass) it is not removable but several of them are broken. Would like to sell the frame as one if possible. It has 6 lug front disc brake conversion, set up for automatic & BB and I "think" it has a posi 6 lug rear. Still need to pull cover on that to verify. No title or vin available for the frame. B pillar is SOLD . |
Re: the panelburb getting cut up
4 Attachment(s)
More general pics
. |
Re: the panelburb getting cut up
5 Attachment(s)
6-10
. |
Re: the panelburb getting cut up
5 Attachment(s)
11-15
. |
Re: the panelburb getting cut up
5 Attachment(s)
16-20
. |
Re: the panelburb getting cut up
5 Attachment(s)
21-25
. |
Re: the panelburb getting cut up
5 Attachment(s)
26-30
. |
Re: the panelburb getting cut up
A lot of the stuff I have already pulled from this is already listed in this thread
https://67-72chevytrucks.com/vboard/...d.php?t=786921 . |
Re: the panelburb getting cut up
I have not pulled the headliner or bows yet so will wait to list them until I can determine condition of them. It looks like original headliner panels that have been covered over with fabric
|
Re: the panelburb getting cut up
5 Attachment(s)
Few more pics
. |
Re: the panelburb getting cut up
If you cut the pass. Side B piller out? How much for that? How much for third door complete with hinges?
Posted via Mobile Device |
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Quote:
Quote:
|
Quote:
Posted via Mobile Device |
Re: the panelburb getting cut up
Clayton
B pillar is $150 plus shipping I can cut where ever you need 3rd door minus door panel but including hinges $160 plus shipping Probably cost more to ship on this than what it would cost you to make a trip down I could leave the door attached to the B pillar so your gaps are already set :lol: |
Quote:
Clayton Posted via Mobile Device |
Re: the panelburb getting cut up
Quote:
|
Quote:
Posted via Mobile Device |
Quote:
Posted via Mobile Device |
Re: the panelburb getting cut up
5 Attachment(s)
Quote:
Got a chance to look closer today. The B pillar looks to be in great shape. The only spot I have not checked yet is underneath. Will try to get something out there in the morning to lay on, had a lot of rain. . |
Re: the panelburb getting cut up
5 Attachment(s)
The 3rd door has some body filler in the lower section of the outside panel. Lot of surface rust along the bottom perimeter but the only hole is on the inside edge of the door closest to the lower hinge. It looks like it started as a drilled hole but has gotten away from that. It has a speaker hole cut as well. Two of the pics are looking at the inside bottom of the door. You can see a lot of surface rust but I do not see anything major. That may change with a blaster so I will let you decide
. |
Re: the panelburb getting cut up
5 Attachment(s)
A few more pics
. Attachment 1909871 Attachment 1909872 Speaking of blaster..... While out there I thought I was losing my mind but it sounded like a shotgun went off and I got hit in the back with something. I looked around and did not see anything at 1st. I was looking for somebody not something. This is what I found. This is the rolling frame from the burb I got from you. Any warranty on them tires? :lol::lol: Luckily I have a spare :lol: Attachment 1909873 Attachment 1909874 Attachment 1909875 |
Re: the panelburb getting cut up
Richard, any chance of getting a foam sound deadener from one of the roof supports? I have either tossed mine, or misplaced them. Trevor
|
Re: the panelburb getting cut up
Man Richard that tire is crazy.. and to think I drove it around my property before disassemble. Glad your safe but I do believe the 10 day warranty is expired.... 😬 but I think I’m gonna pass on the pillar and door. Currently getting my square ready for resale and the axle swap motor swap is eating my funds up quicker than expected. Thanks for taking the time to get the pics
Posted via Mobile Device |
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Quote:
Thanks for letting me know on the other parts |
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Quote:
I will try later today to get them out and will post back |
Re: the panelburb getting cut up
Quote:
Richard |
Re: the panelburb getting cut up
2 Attachment(s)
Quote:
. |
Re: the panelburb getting cut up
3 Attachment(s)
Quote:
One of them has a couple cracks in the clear part of the plastic but the other two look pretty nice. I will try to get them out tomorrow for a close inspection of them. . |
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Quote:
Richard |
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Quote:
I would figure it would be at least 150 shipping but would want to check it b4 hand anyway. |
Re: the panelburb getting cut up
4 Attachment(s)
Quote:
The upper door jamb 1” from the front corner, which lines up perfect with where the flat piece overlaps. The bottom 7” wide which puts both sides just to the outside edge of the two curves And to be honest I could care less about crating and fastenal. I’d be fine with wrapped in cardboard and sent. For what I need it for a little edge damage isn’t going to make a difference and it’s on 4.5” long. I’d say tape the upper door jamb to the b-pillar. Do a crude cardboard wrap and send it. |
Re: the panelburb getting cut up
Sent a PM on...
1. wing windows 2. grille trim and headlight bezels 3. yellow parking light lenses |
All times are GMT -4. The time now is 12:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com