Post Your Straight Six Pics!
1 Attachment(s)
Post up your pics of the Straight Six! I'm especially interested in power steering setup and header/intake combos. Also state what transmission your using. I'll start. Mine's an all stock 250 with a four speed transmission.
|
Re: Post Your Straight Six Pics!
I don't have any pics to post as of yet...but when truck is done I'll get some up. I've got an Offy intake, Hedman long tube headers, and Edelbrock 500cfm carb.,manual choke. The tranny is a NP GM/ MY6.
|
Re: Post Your Straight Six Pics!
250 With a 3 speed went from the tree t da floor
http://www.supermotors.net/getfile/5...e/dsc00029.jpg Have power steer brackets, pump but needing a box. http://www.supermotors.net/getfile/5...e/dsc00030.jpg http://www.supermotors.net/getfile/5...e/dsc00031.jpg http://www.supermotors.net/getfile/5...e/dsc00028.jpg |
Re: Post Your Straight Six Pics!
2 Attachment(s)
250 hooked to a four on the floorganism.
excuse the dust work has a gravel parking lot:( no p.s. sorry |
Re: Post Your Straight Six Pics!
Here's mine. Just finished rebuilding a 3 spd. with overdrive. It will go in next.
Power steering/brakes & air conditioning. http://i6.photobucket.com/albums/y24...005Pics007.jpg IMG]http://i6.photobucket.com/albums/y249/Botietruck/LastDays2005Pics006.jpg[/IMG] http://i6.photobucket.com/albums/y24...esopics040.jpg http://i6.photobucket.com/albums/y24...ck/aircond.jpg |
Re: Post Your Straight Six Pics!
Awesome!:metal: Keep them coming!
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
One of my sixes, Saginaw 3 on the tree...
|
Re: Post Your Straight Six Pics!
4 Attachment(s)
Here is my other six, It is also 3 spd. Saganaw
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
Any turbos out there?
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
Here's the current incarnation (1) and an install shot before the power disk brake conversion during the overdrive transmission conversion (2).
Posted a couple more detailed brake booster and power steering shots here: http://67-72chevytrucks.com/vboard/s...d.php?t=257942 |
Re: Post Your Straight Six Pics!
3 Attachment(s)
Not 67-72's but good looking engines none the less...I'm sure if you surf inliners.org you will find even more ideas
Attachment 300056 Attachment 300058 Attachment 300059 |
Re: Post Your Straight Six Pics!
Here's my 292 from my 72 burb. I can't find a picture of my 250 in my 63 pickup.
Botietruck, What's the part number on that a/c compressor? http://i221.photobucket.com/albums/d...oe57/e9_12.jpg http://i221.photobucket.com/albums/d...oe57/e9_12.jpg Ps. I hope this pic works first time for posting |
Re: Post Your Straight Six Pics!
2 Attachment(s)
292 in my 69' C10
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
Borrowed some more of yours 69 hafton. Looks good!
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
Here's Leo Santucci's turbo powered hybrid headed 292 that I wish I had.
|
Re: Post Your Straight Six Pics!
Joe, Of all the receipts I have, that one I cannot find. I did purchase it from NAPA as an exchange unit...that was about 6-7 years ago.
|
Re: Post Your Straight Six Pics!
68 GMC... Converted to p.s./p.b. using parts off other vehicles. Power steering pump and mounting hardware I got from a 70's six cylinder and bought one of the mounting brackets from the Chevy dealer about 6-7 years ago. They still had them for the newer 6's.
As you can see from the pics, I had to cut a piece of the mounting bracket since the hole didn't line up and it interfered with the alignment of the pump. There's enough other mounting hardware that it does not move... http://img.photobucket.com/albums/v6.../Bluebell8.jpg http://img.photobucket.com/albums/v6.../Bluebell5.jpg http://img.photobucket.com/albums/v6.../Bluebell2.jpg |
Re: Post Your Straight Six Pics!
3 Attachment(s)
Here is the before and after. 250 in my 67 GMC NP435 4spd
|
Re: Post Your Straight Six Pics!
1 Attachment(s)
292
|
Re: Post Your Straight Six Pics!
Gotta love those straight 6 engines.
|
Re: Post Your Straight Six Pics!
4 Attachment(s)
Here's the 230 in my '64 and the 292 in my '69. Gotta love the straight sixes. :metal:
|
Re: Post Your Straight Six Pics!
This is my mighty 230. Check out how some PO welded a 2nd exhaust dump on. Who ever did it did a good job, but it aims right at the clutch pivot. Maybe for an auto trans. It don't leak, so I ain't gonna mess with it.
http://i3.photobucket.com/albums/y55...upPanel002.jpg http://i3.photobucket.com/albums/y55...upPanel001.jpg I know this ain't right, but it'll have to do for now. http://i3.photobucket.com/albums/y55...h/Panel003.jpg This is after power brakes, with the off set air cleaner. http://i3.photobucket.com/albums/y55...install019.jpg |
Re: Post Your Straight Six Pics!
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
This belonged to n2billet before he sold Lucy...:)
|
Re: Post Your Straight Six Pics!
^ That is Sweet!
|
Re: Post Your Straight Six Pics!
1 Attachment(s)
Here is mine in my 59 GMC.
236 I6 |
Re: Post Your Straight Six Pics!
1 Attachment(s)
bump...
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
...
|
Re: Post Your Straight Six Pics!
|
Re: Post Your Straight Six Pics!
Wow!:jdp:
|
Re: Post Your Straight Six Pics!
3 Attachment(s)
These are pics of my 48 chevy,with 216,I since then have split the manifold for duals,will get better pics,I do not have any right now of my burb with 6-banger(250).Attachment 415900
Attachment 415901 Attachment 415902 |
Re: Post Your Straight Six Pics!
3 Attachment(s)
Here is the 250 in dad's 71 GMC, attached to a three speed on the tree. Now has a 3.07 posi rear axle.
|
Re: Post Your Straight Six Pics!
hey you guys with the 292 engines i would like too talk too you i want too know more info about the 292 engines
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
I posted a couple pics earlier in this thread of the 230 in my '64, so here are some of the 250 that is in there now. I bought it on CL from a member of this forum, and cleaned/painted the engine bay last summer.
|
Re: Post Your Straight Six Pics!
2 Attachment(s)
Here is the '70 250 l6 Chevelle engine with a compound 4 speed in my '67 short bed stepper.
Danny |
Re: Post Your Straight Six Pics!
3 Attachment(s)
A Chevy 6 in a 32 Ford that I saw at a car show, supercharged and power steering.
|
Re: Post Your Straight Six Pics!
I am curious how these motors would handle some nitrous?
|
Re: Post Your Straight Six Pics!
This is a 250 with a 700r4 combination. I'm afrade at this time these are all the picturers I have but I could probally get some more if needed.
http://i362.photobucket.com/albums/o...6truck5002.jpg http://i362.photobucket.com/albums/o...7truck5001.jpg http://i362.photobucket.com/albums/o...0truck7001.jpg http://i362.photobucket.com/albums/o...1truck7002.jpg I hope these help, if you need more info just send me a PM and I'll get you the information you need if you have a day or so to wait. |
Re: Post Your Straight Six Pics!
Here is my 292 getting torn down
http://s221.photobucket.com/albums/d...292%20inline6/ I hope this link works.. let me know |
Re: Post Your Straight Six Pics!
My 1967 C20 with 250ci & Powerglide.
Hoping to add Power Brakes, & Steering, among others updates. How are you guys adding HEI ignition? And need more info on your power steering pump setups please. :metal: http://image52.webshots.com/552/2/4/...0fMEjAT_fs.jpg |
All times are GMT -4. The time now is 07:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com