Parting 77 Scottsdale 1/2 ton 4x4
1 Attachment(s)
This was a good running truck EDIT THIS TRUCK IS LONG GONE. I will be using the engine for my 83, but everything else is for sale.
clutch/brake pedal assembly...$30 plus shipping cargo light...$26 shipped SOLD gas tank mounting brackets with straps...$10 each plus shipping 3.07 axles...$250 pair local side mirrors, right side has chips...$20 pair plus shipping woodgrain dash insert...$20 plus shipping if the studs don't break truck carcass...about 9 cents per pound;) |
Re: Parting 77 Scottsdale 1/2 ton 4x4
4 Attachment(s)
tough time uploading pics...wild blue internet service:waah:
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
inter fender any good and fenders
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
4 Attachment(s)
pics
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Interested in cargo light to 14222. What is the condition of the chrome, any pitting? Is it possble to get a small piece of wire to splice into all screws and gasket.
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Liddy71...They are rusty
madcow75...I will pull in next couple of days and verify condition for you. Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
How about that t case shifter boot?
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
It looks good, but I will pull and check condition. What zip or postal code is it going to? BOOT SOLD
Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
will the front inner wheel wells fit a standard 78 c15?
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Quote:
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Just curious, what is that in the left corner of the dash where the a/c vent would go if it were a a/c truck?
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Quote:
Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
Quote:
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Quote:
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
I see the vr4 weight dist hitch. Does this truck have the original hitch still on it? I need one for my 76 big ten.
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
dang ray you are going to drive me broke ahaha. how much for left front wing window assembly??
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Curious about the side mounted spare. Any pix, thinking I might be able to use it in my 66 fleetside.
Pm me to remind me, I tend to forget. Thanks, Steve |
Re: Parting 77 Scottsdale 1/2 ton 4x4
1 Attachment(s)
75gmc454...It looks to have a Reese receiver hitch, however, there is a rear sway bar that is missing a couple of pieces.
54Caddy...This vent window is junk...maybe the next truck has a good one. qksilver...Sorry, this bed is not the original bed. The carrier is long gone. I will start tearing into this tomorrow. Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
How much for the heater assembly? The one under the dash holding the heater core. If it has no cracks or anything. Also, if it has the torx head screws holding all the light lenses in. Shipped to 01543. Thanks, Brian.
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Ray that bed appears to have at least one gas door on it... if they are in real good shape would you sell them and shippped to 08859
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
3 Attachment(s)
liftlaw...I will pull soon and check condition. If good, $30 plus shipping. SOLD
Bob...I will take pics of the gas doors soon. SOLD 76stepside...The boot has a couple of rips. Boot, ring, indicator...$10 shipped. SOLD madcow...I pulled the cargo light, switch, and harness. (it goes to the cab corner where it connects to the cab light harness) The chrome is not heavily pitted, but worn. The gasket to the lens fell apart and the rubber has wear. The lens looks good and it will need a bulb...pics: SOLD |
Re: Parting 77 Scottsdale 1/2 ton 4x4
Boot/ring sounds good for 10 bucks, Just currious does that wiper delay setup work ? I might like to have that if it does.
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Cool I will take it. Where do I make payment. Where does the cargo bed light switch mount to from the factory. Can you send me a picture where it origanally was mounted. I would like to keep my truck looking as much as stock as I can. Dustin
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Thanks for looking Ray. I really dont know what the factory style hitch even looks like.. Just hoping this truck had one on it.
Im sure that the original chrome rear bumper and brackets are gone too then. That is what happened to my big ten. Someone got rid of all of that stuff and put a reese hitch on it and a step bumper. |
Re: Parting 77 Scottsdale 1/2 ton 4x4
sounds good to me. Let me know. Thanks, Brian
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
if the other one you're gonna part out has the dome/cargo light that flips down, i'd be very interested.
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
2 Attachment(s)
tim...I will check the other truck next week.
Bob... The gas tank doors look good, but there is primer on the outside. I don't think the po used bondo, but not 100% sure as the inside looks clean. $5 each door plus shipping and I'm still trying to unscrew the bolts...pb blaster. Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
How much for a good piece of the bed say 1.5ft x 1.5ft? Shipped to 37138 Yeah, I just need a small patch for the back right corner and not sure I want to hammer it right lol
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
The bed is pretty clean on this one so I don't want to cut it up yet.
Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
ok, maybe ill pound a piece out then lol
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
any pics of the seatbelts and sun visor
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Sorry, they are junk.
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
2 Attachment(s)
Brian, I pulled the heater box and it looks good. Shipping to MA is going to be $25 for a total of $55.
Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
are the cargo tie downs on yhe bed still there?
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Payment sent for cab light Thanks.
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Looks and sounds good to me. I'll take it. Pm sent.
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Quote:
Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
Hey Ray, Payment sent through Paypal. Let me know if it didn't go through. Anything on the torx head srcews? Thanks, Brian
|
Re: Parting 77 Scottsdale 1/2 ton 4x4
Sorry, I forgot...they are phillips.
Thanks, Ray |
Re: Parting 77 Scottsdale 1/2 ton 4x4
still waiting to hear about those gas doors if ya have time :)
|
All times are GMT -4. The time now is 05:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com