![]() |
89 C1500 W/T For Parts More Parts/Prices Added 9/18
I am going to part this truck out
Two things that im keeping are the fuel injection As well as the serp belt setup The current setup is a 305/Th375 The motor runs funny could be blown headgasket i will soon determine what the problem is The trans works great it is non electronic it has an electric speedo but a cable off an older setup could be put in Id take 150 for the trans They are good for putting in half tons because there a 400 with a th350 output shaft so you dont need a 30 dollar conversion u joint. Its missing the drivers door glass , has an idiot light dash , Working Am/Fm Im uncertain of the rearend ratio its high though. Let me know if any parts i listed are needed or any i didnt fuel pump gas tank etc. If anyone wants some parts off of it let me know and ill name a price for them When i get the fuel injection off and brackets ill inventory everyything and post prices Here is a pic of the truck http://mysite.verizon.net/res6o8ny/pics/Picture211.jpg |
TTT Tranmission Is No Longer Available Pass Fender has Dings Hood Is Good ,
Asking 75 For the Hood 75 For the Passenger Fender . 275 gets the whole front clip grille core support evap coil everything. |
how much for the hood? is the dash any good?
|
The Hood Is in really good shape Im going to give it a bodymans lookin over tommorow But im confident thats a good hood Id take 75 For it
By Dash do you mean the padding or the inst cluster? I may keep the dash pad its not that great anyway . THe instrument cluster is an idiot light setup. |
need aq rearend with 373 six lugs if you have it
|
how did it look after the bodymans lookin over? 75.00 is a good price. Now... how to get it to Houston without costing more than 50 bucks. Coming down anytime soon? I just got back from Temple but I wasn't in a suitable transporter... I don't think the company would like me strapping it to the top of their Rodeo.
by Dash i meant the cap. I don't even know if they were the same in 92. |
I still havent been able to reach the other guy that wanted the hood. Its In very good shape I belive alot of people use greyhound to ship large items Im not going to houston anytime soon .. at least not that i know of.
Let me know what you decide Im going to try to get some pics my usb ports quit working so i cant upload pics onto this computer so im gonna try to get a friend to upload them and email them to me. Im going to try to have posted on here tommorow. |
let me know on the other guy... I'll take it if he doesn't. I have family up there so I can have them pick it up for me. I won't be able to make the trip up until around the 21st
|
Hood Is Sold...
|
Are the seat belt covers intact? I'm looking for the pieces that cover the bolt on the b-pillar. They get unclipped from the bottom, then the bolt has to be removed from the pillar to remove the piece that holds it in place. Most people have broken the top off trying to get them off... and that's what's broken on mine :(
|
The ones i have are blue they are in good shape If i can get them off without breakin them wich im pretty sure i can 25 shipped.
|
Passenger Door Decent 85$ Drivers Fender Good Shape 65$ Pass fender Not too good but would make a smooth one with some bodywork 30$
Gas Door In good shape 30$ |
Passenger Door Decent 85$ Drivers Fender Good Shape 65$ Pass fender Not too good but would make a smooth one with some bodywork 30$
Gas Door In good shape 30$ |
1 Attachment(s)
Got the hood today....Looked dern good! Thanks alot.
Is that front bumper dented? I should've thought about that before, but I could always get my stepdad to come get it and hold on to it for me... Thanks, D |
yea its dented
|
Sorry for the short reply yesterday My keyboard was caddywhompassed and i had to copy and paste that litlte reply..
Glad to hear your happy with the hood. I was looking at truckin the other day and they had smooth bumpers for painting for like 59 bucks the mag was a few years old but surely the price hasnt gone up that much. |
How bout the steering column? is it tilt? floor shift? How much?
|
non tilt colum shift
|
Seat Belt Bolt Covers Pending/SOLD
|
The Seat Belt Bolt covers Are Still For Sale And Boxed Up ready To SHip 15$ shipped.
And they are Blue. |
front clip
how much for the rest of the front clip?
|
wrecked in WI
How much for the rest of the front clip? Looking to get my '96 back together and in working order.
|
Sorry for the slow reply didnt have a keyboard untill today..
If you still need the clip i would take 250 for it all grille core support evap coil both fenders lights bezels all that good stuff. But i dont know how you would get it to wisconsin I imagine all the stuff would ship ups if it was taken apart but i think it would be costly. Let me know either way . |
whats the seat like in it. how much would you want for it. thanks, Steve
|
You wouldnt want it.. most of the intereior is pretty messed up and worn . Some panels are good like speaker grilles . the dash pad ,
Everything else is pretty much worn out from toting around road department workers. |
Parts Still For Sale You need it name it This truck is going to be tottaly stripped down to nothing all chassis parts disc brakes rearend spring you name it .
|
More Parts/ Details Added
Trans if for sale again Last guy Local Not a board member Was a deatbeat so its for sale BTW It has an electric speedo.
Windsheild Washer Resivoir & pump Works Tested. 30 Shipped , This would be a good piece to adapt into an older truck Since the pump is in the tank. Overflow tank Missing Cap Dirty .. 10 Plus Shipping Charcoal Can ? 5$ Headlight Harness The Wire Loom Is Cracking But Otherwise In Good Shape 40$ Grille Good Shape 45$ Headlight Buckets 30 And Thats The Pair Wiper Motor 30$ Fuel Tank No Leaks W/ Fuel Pump 75$ Local Pickup ONLY. DriveShaft Truck Had Th375 55$ Length " Coming Soon" More Parts/Prices/Descriptions/ Coming Soon At the moment i cannot upload pics but as soon as the new cord for my camera arrives from ebay i will be happy to Please Pm With Any Questions On Mentioned Parts Or Something You May Need Not Mentioned. Once again My Local Zip Is 75474 |
Windshield waser pump SOLD>..
Pair Of Hood Hinges With Bolts that attach to the truck 35$ Thats 4 the pair + Shipping. Cowling Plastic With Screws and end pieces They have white overspray on them but it would prolly remove with thinner. 40$ + Shipping ABS Controller? Black box With Valve 45$ + Shipping Power brake booster With Master Cylinder 65$ + Shipping Instrument Cluster Shows 275K Miles Its Warning Lights Speedo & Gas Gauge 40$ + Shipping Has PRND21 Indicator But needs repair ? the little cable isnt attached. Horn 15$ , Windshield wiper Under Cowl Setup With Both Shafts and all still attached .. 35$ Automatic Shifter Linkage From Colum To Trans Including Trans Bracket and adjustment bracket for the colum 40$ More to come as items are removed/Inspected Pics coming soon. |
Driveshaft Length Is 68 1/2 inches from u joint trunion to u joint trunion .
Blue Seat Belts Could be Used to convert 67-72 to shoulder 50$ thats the full set Im not sure about the middle belt it may be under the seat i havent pulled them yet. Blue Glovebox Door 25$ Blue Instrument Cluster Surround Pad 25$ Blue Non Casset Player Center Dash Piece 25$ Blue AshTray Assembly all intact 30$ Automatic Transmission Crossmember 45$ Rear Speaker Grilles 25$ Blue.. BTW the windshield wiper motor is only two speed No delay. Inner Fenders 25$ Each Core Support 65$ Cab Has hole where vhf antenna was for highway department otherwise in good shape 200$ I can weld hole up upon request. |
Emergency Brake Pedal Setup 35$
Brake Pedal 25$ For Auto.. Gas Pedal Assembly W Cable 45$ Cable Seperatly 20$ Gas Pedal Assembly Minus Cable 30$ A/C Controls W Black Buttons Works 25$ |
Here are some More pics Of the parts
|
Few more O yeah Cheap Mirrors Came off 89 but are autozone specials
25$Shipped |
what about the front discs, spindles, hubs, calipers, all that stuff??? Would also need the tie rods. How much? I can come get the stuff if it's in DFW.
Thanks |
The tierods may have wear on them it had some slack Id give you the entire front end cut off the frame for 125 You pick it up .. Im located in Quinlan 75474 Do a mapsco and see if you would want to pick it up Its around 68 miles east of dallas.
|
They are 6 lug correct?
|
Nope its 5 on 5 Its not a light duty 2500 Its a half ton.
|
****, I'll think about that
|
Few more pics added Will Take 40$ For the evap coils and all hardware that atttachs it It looks ruff but system had freon in it still so no leaks.
|
Man, I could use a d/s fender and door
|
D/S Fender and D/s Door pics Coming Up. Is there a greyhound Bus Depot Around You? Thats the only way i know of to ship large items such as doors. The fender isnt al that heavy it should go ups no prob but the door is another story.
|
All times are GMT -4. The time now is 08:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com