Rust coatings
Thought this might be a fun poll. I searched for previous polls on this subject but couldn't find one. So the question is, what is your favorite rust paint? In the poll, I included the following:
Eastwood RE, www.eastwoodco.com KBS Coatings, www.kbs-coatings.com POR 15, www.por15.com Rust Bullet, www.rustbullet.com Zero Rust, www.zerorustusa.com I'm particularly interested in any thoughts you have about Zero Rust and KBS because they have a nice range of colors to chose from. If you reply to this thread, don't forget to vote!!! |
Re: Rust coatings
por-15 all day and every day..:metal:
it's a B!$@H to get off your hands tho :o pretty much has to wear off :lol: |
Re: Rust coatings
I've used Rust Bullet with great success so far, and it is easier to use than Por-15.
I used Por-15 on a 90 K5 where I painted one underside of the floor pan with it and the other side with rustoleum rusty metal primer. After one MA winter, the por was flaking off and the rustoleum was doing much better. Now I will say that this result may be due to my prep wor rather than the Por-15, but if that was the case I would have expected the Rustoleum to be in the same shape. |
Re: Rust coatings
ask this question in about 10 years:lol:
|
Re: Rust coatings
what about marhyde one step or rust mort. they both turn rust into primers and then you can add any color on top.
|
Re: Rust coatings
Industral electrican welders use a grey zinc powder paint in spray bombs..I have seen welds that were painted with out even cleaning the weld 20 years old with no rust even starting..these are out in the rain and snow 356 days a year..alls I know is that paint works on bare fairly clean steel like crazy!
|
Re: Rust coatings
used por a dozen times or better trying to find why people might like it. It must just be the familiar name. I recently used the kbs rustseal and it's much much better...and less expensive. Here's the best kit:
http://www.kbs-coatings.com/KBS-Fram...t-P106C30.aspx |
Re: Rust coatings
Sorry to throw another one in the mix, but this is what I'm going to use. MSGross used it and seems to really like it.
http://www.nomorerust.com/ |
Re: Rust coatings
This is a great post. Always wondered what else was out there besides POR-15. I want to try the KBS system.
|
Re: Rust coatings
The kbs is worth a try and it is about the only one that has more than black and silver as colors. I mostly use there OEM satin as it is so hard to find a good Satin rust paint. Then your work is done you don't have to worry about messing around with a chassis/floorpan top coat.
|
Re: Rust coatings
How about a "none of the above" for the post. I think the rust coatings are way overated. For one they "encapsulate" the rust. By this, it means it covers the rust and seals out the air to prevent more rust. A lot of people use it the wrong way is whay I don't care for it. I have heard of ones "bondo'ing" cab corners and then covering with POR-15 then painting over it. Well "duh", a cab corner is rusting from the inside out. Some companies state that their product neutralizes the rust. But then reading down they talk encapsulation again. Also it is stated that scale, etc, must be removed first or there product will not work correctly and will then void all claims. POR and the others is most definately a tougher paint, but it is not the rust cure all. To cure a rust problem, you need to get rid of the rust problem to begin with. There are a few products that will neutralize the rust completely, but if you are working on a frame of the truck with the bed and cab attached, you are going to have a messy time. The best thing to do is have a frame sandblasted, the next best is to have the bed removed, wire brush, DA, and sand every place that you can, then neutralize the rust, then wither use the POR's or such or a brand name quality of paint. For the underneath though, if it is not going to be show quality but you want it looking nice, Descale the rust, clean thoroughly, and take a hint from the farmers with the implement paint. You figure that their equipment is sitting out 24/7. But that is just my $.02 on the subject. I have used different products over the years and most do not do what they state that they are going to do. That is why they have lawyers go over the descriptions before a product ever hits the market. When 6 months down the road, something fails, chances are you have already tossed the receipt, or it is such a pain to get your money back that it is not worth it. I guess I am getting off topic a little about that but a buddy of mine was over last evening and he was telling me about his '06 Fullsize. He is a painter at Honda, so he knows what he is taling about when it comes to that department. He installed a lift kit on his truck and in doing so, found some areas that were missed with paint and seam sealer from the factory. With the truck having a warranty against rust for what I believe he said was 100,000 miles, he went back to the dealership to address this problem. The manager looked at it and stated that there was nothing they could do to remedy the problem. Reason being.....he installed a lift kit, although the lift kit has absolutely nothing to do with what was forgotten to do at the factory. But they did tell him that when it starts to rust out, to bring it in and they will cover that. So...no preventive maintenance there. Anyways, I'm done with my windy rant. Just make sure you clean, prep, descale, etc. before using the POR or other products.
Kevin |
Re: Rust coatings
Here's a question. If a frame is blasted, can you still use the above rust coatings or do you need to first prime the blasted metal?
|
Re: Rust coatings
i really like the KBS RustSeal. It flows out better and covers better than the others that i have used (POR-15, EastWood, RustBullet). It also comes in Oxide Red and i use that color alot.
http://www.kbs-coatings.com |
Re: Rust coatings
Two people with one post pushing KBS??? Hmmmm...
|
Re: Rust coatings
Quote:
Sparky here:) The cans say cold galvanizing on them, not sure if that is the name or just part of the label:crazy: . Tuff stuff and will last forever, although I am not sure how it would hold up to salt:confused: |
Re: Rust coatings
Called rustbullet yesterday and they are sending me a pint to try out. And giveing me the names of some shops that have used it. So I will say so far about them atleast you can get ahold of someone and free stuff is pretty cool.
|
Re: Rust coatings
Rust NEVER sleeps.
You get RID of it or deal with it later. POR has to have "some" rust to adhere to and the "converters" work temporarly but if ANY of these coatings are compromised,it WILL come back big time. I've used cold galvanize in the spray can and as far as automotive work sucked. Our urethane paints just don't get along to well with it. BEST advice is remove,replace and epoxy it. |
Re: Rust coatings
Quote:
|
Re: Rust coatings
guys i need your help on this one!!!
I bought a hood and there is some surface rust that is scaring the it out of me. I want to strip it down and use some etch primer but I was wondering what would be the best way to get rid of the rust like I said it is just surface rust right now and I want to know what i can do about it |
Re: Rust coatings
Sand as much off as you can with some 80 and then use some simple naval jelly to finish removing it off.It's slow and will take multiple apps but it will remove it and then epoxy it after a grease & wax remover clean.
Go check out Randy's web pages, I'm sure he has this procedure someplace. Ahh, Here ya go. http://www.hotrodders.com/forum/secr...led-55679.html |
Re: Rust coatings
what is naval jelly?
thanks for the quick reply my hood does not have 1/4 of the rust that willies has |
Re: Rust coatings
OK, let me know how u think this will turn out. I wire brushed the crap out of my frame, put a couple coats of rattle can primer on, then coated with rattle can black paint. It looks good to me. And my truck is not going to be a show stopper. This is my first build and I just want something that looks good and that i can cruise in once in a while. It'll spend most of its time in a garage. Am I making a big mistake with the spray can paint or will that be good enough for what I want.
|
Re: Rust coatings
So has anyone recently tried any of these? When only a few people respond it's hard to really see a pattern because some of the opinions conflict.
|
Re: Rust coatings
Here's an idea! Quit messin' around and do it right. Take it apart and blast it. Then prime with an expoxy sealer and paint. This is the only way to go, anything else is a waste of time and money. I always do it this way for myself and my customers.
|
Re: Rust coatings
Quote:
|
Re: Rust coatings
I have never used any of them and never will. It has already been said, the only way to do it right is to remove any and all traces of rust. For me these paints are just a temporary fix that will itself be harder to remove than the rust later down the road when it comes back.
Good point on the naval jelly Mike, I have been blasting or having parts dipped and EDP coated so long I had forgotten that one completely. |
Re: Rust coatings
I used POR-15 about a month ago. Although it was alot of work to prep the surface just to lay the stuff down, I am very pleased with the results but like what was said above, I'll know how good (or bad) this stuff is in 10-15 years. For now, it looks good, is rock hard, and tough as nails.
|
Re: Rust coatings
anybody got any ideas on how to remove light surface rust from in between the inner & outer panels of a fleetside box. The panels are off the base, looking for alternatives other than splitting the panels
|
Re: Rust coatings
While I tend to agree that most of this stuff , other than the phosphoric acid based stuff, is a band aid at best when you are talking about anything sheet metal related but when it comes to frames and other heavy sections I don't know if I can agree. It's pretty common in industrial and other heavy equipment to remove scale and treat or coat. I have personally tried as an experiment some good epoxy paint on a rusty snowmobile trailer and 15 years later it's still solid as a rock. I'd say that in heavy metal sections like our trucks frames that are usually already rusty and have been for 30 years that as long as the frame is sound that scale removal and overcoating with something like epoxy is an acceptable process. Sheet metal has very little to give in terms of thickness and can be compromised quite easily by rust. Heavy sections seem to fare much better. I would also argue that regardless of what you do if the new coating is compromised the corrosion process will just start again whether it's been blasted clean or not. The only exception is if a galvanic type coating is applied and this must be applied to a white or near white blasted surface.
|
Re: Rust coatings
I just bought a blazer that has no rust but I plan on going topless in Florida and figured I could protect the interior with one of these products. I haven't even used any of them yet and I feel defensive. It's not like I'm painting over rust and just hiding it from view, I was hoping to help prevent it from starting.
|
Re: Rust coatings
Quote:
|
Re: Rust coatings
Exactly!!!:whine:
|
Re: Rust coatings
Has anyone ever painted their entire interior with this stuff? Could I brush it on and have it look decent? I'm taking floor, inside tailgate, kick panels, etc? Anyone ever done this? I want to take the top off and it rain pretty often here, plus the interior looks like crap now.
What do you think? I'm prepared to get yelled at. |
Re: Rust coatings
Im about to take my frame down to get blasted and asked the guy about por-15...
His opinion: it's crap. too expensive, doesn't do what it claims... much better products on the market. :confused: Unfortuneately I didn't have time to go into details with him on the phone the other day, but certainly plan to when I see him soon... Just thought I'd pass along his comment. he's been blasting cars for many years... my .02 |
Re: Rust coatings
I have used Zerorust on my Burb frame after I pressure washed, wire brushed on a grinder and used Zerorust prep. It seems to working very well. It's only been about a year ago but We pull a trailer for Motocross and are on a lot of gravel and dirt and it still looks brand new. Dave
|
Re: Rust coatings
Hmmm, the por-15 I put on my '64 chevy truck frame looks good 11 years later... that's some good crap!
|
Re: Rust coatings
Quote:
|
Re: Rust coatings
Seems like people either hate por15 or love it.
|
Re: Rust coatings
https://www.tamcopaint.com/chassis-b...le-stage/p2038
This stuff is awesome..I just painted my chassis with this and it is Nice and seems to be very durable... $110 for a gallon kit that will go a LONGGGGGG way... https://www.dropbox.com/s/6gotpw16qo...2748.jpg?raw=1 |
Re: Rust coatings
WARNING!!
12 Year Old Thread!!! |
All times are GMT -4. The time now is 07:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com