Parting out 84 Chevy 3/4 ton 4x4*
 

I have this truck that has back DMV fees of $1700 owed.:waah: I don't think it will ever see the road again. The interior has been stripped, but most pieces are in the bed. Notice the wood steering wheel.
tilt column with bad steering wheel threads $40 plus shipping
14 bolt rear and GM front axle $300 pair local only
radiator $50 plus shipping
350 engine low miles runs great $400 local only SOLD
208 t-case formerly mated to 700r4 $50 local only
wing windows $20 each plus shipping
The bed and back end of the frame are gone. This is a nice rust free cab for patch panels. Ask and I will quote prices. Thanks, Ray

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Looks like a nice set of Warn premium hubs for somebody.

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Yes, they are the full turn hubs and are included with the axles.
uncut gauge bezel $20 plus shipping SOLD
misc trim pieces $5 each plus shipping A pillars, headliner SOLD
maroon arm rests $5 each plus shipping

Re: Parting out 84 Chevy 3/4 ton 4x4
 

700r4 flywheel cover $25 plus shipping
factory tow hooks $30pr. plus shipping SOLD
misc emblems $5 each plus shipping

Re: Parting out 84 Chevy 3/4 ton 4x4
 

I sure would like the rolling chassis, but to far away. :waah:

Re: Parting out 84 Chevy 3/4 ton 4x4
 

how much for the a pillars and the fender emblems shipped to 29151...and also, how does a plastic emblem rust or is that just junk on them...thanks

Chuck

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Hey Ray, what are the gauges under the dash? How much for the setup? Does this truck have a non-clock clear plastic that went over the gauges?

Thanks
Benjamin.

Re: Parting out 84 Chevy 3/4 ton 4x4
 

in the third picture down, you can see the clock in the cluster...

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Thanks, didn't notice it. Still interested in the gauges under the dash. One more question, any idea if they work?

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Does it have a cargo light?

Re: Parting out 84 Chevy 3/4 ton 4x4
 

I have the 2 A pillars and only 1 fender emblem $15 I'll get back with you on the shipping. Junk debris on emblem...it sat under a tree.

Re: Parting out 84 Chevy 3/4 ton 4x4
 

The gauges under the dash are $20 shipped. I think they work but can't guarantee. Thanks, Ray

Re: Parting out 84 Chevy 3/4 ton 4x4
 

that'll work ...thanks

Re: Parting out 84 Chevy 3/4 ton 4x4
 

That sounds good. Any idea what the gauges are first?

Re: Parting out 84 Chevy 3/4 ton 4x4
 

What can you tell me about the carb. Looks to be and Edelbrock "Q-Jet". Is it in good running condition? Willing to sell seperately? If so, how much shipped to 87507?

Thanks! JC

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Yes, the cargo light is $30 shipped. Thanks, Ray

Re: Parting out 84 Chevy 3/4 ton 4x4
 

The carb is a Q jet style. Its relatively new but the PO said that it was too big for a stock 350. I think he said it was 800 but I doubt it is that big. Any ideas to find out size? I will do $100 shipped on that carb and I will verify the running condition when I start up the engine. Thanks, Ray CARB SOLD

Re: Parting out 84 Chevy 3/4 ton 4x4
 

How much for all the headliner trim shipped to 12303, also do you have the glovebox door hinge? if so how much for that too.

BTW nice steering wheel LOL

Sarge

Re: Parting out 84 Chevy 3/4 ton 4x4
 

I can do $35 shipped on the headliner trim (4 pieces). I'll check on the hinge. Thanks, Ray

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Pics for 87Bob

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Ray, how much for the dash speaker brackets and all the hardware for them?

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Can you put both of these seatbelt covers in my box too and I need a price...thanks

http://www.67-72chevytrucks.com/vboa...1&d=1260926888

http://www.67-72chevytrucks.com/vboa...1&d=1260934540

Re: Parting out 84 Chevy 3/4 ton 4x4
 

The gauges are temp, volts, and oil pressure. The brand name is sunpro. I'll get back to you on the speaker brackets. Thanks, Ray

Re: Parting out 84 Chevy 3/4 ton 4x4
 

How much for the interior dome light with all the harnessing to the fuse box?

Thanks
Frank
Is the cargo light still available? Does the price include the harness and switch?
Maz18@verizon.net

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Yes, the price includes harness and switch. WestButteTruck is first in line. I will check another truck for dome light with harness. If I have one it will be $20 shipped. Thanks, Ray

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Thanks for the response Ray. 800 may be a little much, but it sounds right for a Q-jet. Anyhow, I gonna have to pass for now with Christmas and all. I'll check in with after the holidays to see if it's still around.

Thanks again and Merry Christmas.

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Ray,

Thanks for the reply, if you have the hinge let me know and throw it in the box, if not, let me know how you would like payment and I will get it to ya.

Thanks,

Sarge

Re: Parting out 84 Chevy 3/4 ton 4x4
 

I am very interested in the interior dome light with the complete harness to the fuse box. My truck is currently at the body shop being restored so time is of the essence! If u locate it, please let me know asap. Thanks. I can do without the cargo light but it would be great to have a dome light as my 84 GMC did not come with one. It only has a light at the bottom that u must operate manually.

Frank
maz18@verizon.net

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Ok, I'll pass on the gauges as mine all work. I was hoping that one would be a small tach, I'm looking for one if you have one. Still interested in the speaker brackets though.

Re: Parting out 84 Chevy 3/4 ton 4x4
 

56" rear springs? How much shipped to 84118?

Re: Parting out 84 Chevy 3/4 ton 4x4
 

more pics for 87 Bob.

Re: Parting out 84 Chevy 3/4 ton 4x4
 

If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge?

Thanks,

Sarge

Re: Parting out 84 Chevy 3/4 ton 4x4
 

I'd be interested in the carb also, when you find out if the engine runs or not. Let me know, no hurry. David

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Sorry, the springs went with the back end of the frame.

Re: Parting out 84 Chevy 3/4 ton 4x4
 

It might be a couple of weeks before I get the engine going. I will let you know. Thanks, Ray

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Any news on the speaker brackets?

Thanks
Benjamin.

Re: Parting out 84 Chevy 3/4 ton 4x4
 

I haven't had a chance to pull them, but I'm looking for $5 each plus shipping. Thanks, Ray

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Hey Ray,

Are these still available as well as the other stuff I asked about...just checking not being pushy. I am in no hurry, just tryin to gather some parts.

Thanks,

Sarge

Re: Parting out 84 Chevy 3/4 ton 4x4
 

Ok, so about $12-$15?

Re: Parting out 84 Chevy 3/4 ton 4x4
 

The trim is sold. I'll have to get back with you in a couple of days on the glove box. Some of my parts are several miles away. Thanks, Ray