1984 C10 parting out*
 

I'm parting my Dad's truck...it got hit in the front end and bent the frame alittle, so we're parting it out...

It's an 84 2wd lwb...I'll post some general part prices and post lots of pics...if you see anything I don't price, please ask about it...everything on this truck is for sale except the motor and transmission...there is NO RUST anywhere on the body of this truck...ALL of the panels are pretty straight except for the driver's fender and driver's door...so here's the price list...all prices do not include shipping...Big items are pickup only...I am located in Sumter, SC zip code 29040 so yall can kind of figure out what shipping would be if you'd like...

Pass Door w/ power guts and glass only...$100 pickup only
Hood...$50 pickup only
Hood hinges...$20
SBC motor stands and motor mounts…$30
Harness holder on firewall…$10
Cowl panel...$15
Cruise Control system minus switch on column...$100
Washer fluid bottle…no leaks...$15
Wiper arms...$5
Wiper rod assembly inside cowl…$20
Front suspension, spindles, rotors, and calipers…$200
Master cylinder...$25
Power brake booster…$25
Proportioning valve...$20
Inner fenders...$20 ea. pickup only
Bottle jack w/crank, lug wrench, hold down and hardware...$25
Headlight surround...$10 set
4 Headlight Core support...$35 pickup only
4 Headlight Wire Harness...$25
Grill...$35
Grill surround chrome...$30
Horns...$10 set
Pass. fender...$50 pickup only
Driver's fender...dented...see pictures$20 pickup only
Front side markers...$10 set
Bed w/o tailgate...$300 pickup only
Tailgate...$90 pickup only
Stake pocket tie downs...$10 set of 2
Gas doors...$10 each
Pass taillight...$5
Wheel opening trim...$20 set
Wagon Wheels w/o tires...$150 pickup only
Center caps...$50 set
Gas tank lwb...$50
Tank brackets...$30 set
Rear bumper...$50 pickup only
Trailer wiring...New...$10...Used...$5
Power window and power lock harness under dash...$20
Gas pedal assembly…$10
Accelerator cable…$5
Brake pedal assembly…$10
Emergency brake pedal assembly…$10
Inner door handle bezel...$5 set
Inside door handles...$10 set
Outside door handles...$20 set
Under dash harness w/ fuse box...$30
A/C Heater box w/all ducts...$100
Glove box latch...$5
under column plastic...$5
under column silver metal...$5
Factory dash speakers and mounts...$5 set
Steering wheel...$20
Horn button...$5
Extra Temperature gauge…C to H scale…$5
Cab corner speakers w/mounts...$25
Rear Cab wall panel...$15
Driver side kick panel...$10
Door sills...$20
A/C control...$25
Headlight switch w/knob and nut...$10
Brake light switches...$5 ea.
Sun visors...$20
Dome light w/harness...$20
Rear view mirror...$10
Defroster vents for dash…$10 set
1984 Owner's Manual...excellent cond...$15

NOT Available:

Power steering box
Passenger side gas tank
Complete door panels
Bench seat
Tilt column
Shift indicator
Passenger kick panel
Headliner trim
Seat belts
Factory AM/FM tape radio
Door locks
Drive shaft
Engine Harness
Silver painted gauge bezel
Gauge cluster
A/C Dash trim w/emblem
Master cylinder brake lines
Stripped A/C Cab and clean title
Rear slider window
Door vent visors

Re: 1984 C10 parting out
 

pics...

Re: 1984 C10 parting out
 

more pics...

Re: 1984 C10 parting out
 

...

Re: 1984 C10 parting out
 

pics...

Re: 1984 C10 parting out
 

more...

Re: 1984 C10 parting out*
 

how much for the B-pillar trim shipped to 73071?

Re: 1984 C10 parting out*
 

How much for the Tilt column with cruise and int. wipers shipped to 73020?

Re: 1984 C10 parting out*
 

$15 + shipping sound good? Let me get them out and get a qoute on shipping...

Chuck.

Re: 1984 C10 parting out*
 

Let me get it out of the truck and get a shipping qoute and I'll get back to ya...thanks...

Chuck.

Re: 1984 C10 parting out*
 

interested in the steering box for my 68 c-10

Re: 1984 C10 parting out*
 

let me get it out...I need your zipcode and I can get a shipping quote...

$30 plus shipping...thanks

Chuck.

Re: 1984 C10 parting out*
 

Where are ya located??? Thanks!

Re: 1984 C10 parting out*
 

I will take the seatbelts. Jay

Re: 1984 C10 parting out*
 

How are the wheel well moldings? Jay

Re: 1984 C10 parting out*
 

cool, yeah let me know on the shipping

Re: 1984 C10 parting out*
 

Sure, Just let me know.

Re: 1984 C10 parting out*
 

pm sent

Re: 1984 C10 parting out*
 

I'm in Sumter, SC zip code 29040

Re: 1984 C10 parting out*
 

zip is 07719. need the pitman arm and rag joint. let me know what the shipping is. will it fit in a standard usps box? it might

Re: 1984 C10 parting out*
 

I'll check out usps and see what I can do...I will be removing the big heavy parts off the truck this weekend...thanks

Re: 1984 C10 parting out*
 

i need the vent door for the passanger side and kick panel.

basically anything involving the passagner side kickpanel and the vent door.


like this:

http://i259.photobucket.com/albums/h...D/DSC00179.jpg


very interested. thanks


all the parts that are missing from this picture:
http://farm5.static.flickr.com/4029/...54b407bb_o.jpg

:-)

Re: 1984 C10 parting out*
 

What kind of shape is the right fuel tank in? I have a 85LWB with the left tank only. I have a set of brackets for the right tank and the right fill door assembly but I need the following.

Right tank.
filler neck
fuel lines to the both tanks
Switch over valve
Harness for the fuel tanks
dash switch.

Oh and I sent you a PM on the radio. I'd have you ship me the radio and I have a daughter and family in Charlotte that I'd makes arangements for the balance. Let me know

Re: 1984 C10 parting out*
 

just a quick comment

this is by far the MOST COMPLETE listing for a "parts truck" sale ive seen so far.. i wish this was avail last summer when i was doing everything...

good luck and good job

Re: 1984 C10 parting out*
 

I sent you a pm back on the radio...

about the fuel tank on the pass side...basically you want everything from the fuel system except the fuel line from the carb to the switching valve, the fuel line from the switching valve to the driver's tank, and the driver's tank...am I correct in this? if so, this weekend I'm taking all the big heavy parts off and I'll get everything you want off and post some pics for you...I asked my dad and he said that both tanks held gas and both tanks worked through the switch and the fuel gauge read both tanks...so the dual tank system worked perfect...thanks man...

Chuck.

Re: 1984 C10 parting out*
 

the cab that my dad has is an A/C cab so I don't think it has the vents in the kickpanels, but my crew cab project doesn't have A/C, so it definitely has the vents in the kick panels...let me get them out tonight and I'll post some pictures for you...thanks...

Chuck.

Re: 1984 C10 parting out*
 

I tried to make this thread into everything I wished every other for sale thread I've looked had in it...

I appreciate the compliment...and I wish you still needed parts...:)

Re: 1984 C10 parting out*
 

I'm going to say yes at this time. I'll look forward to the pictures as I'll be able to better tell when I see them.

Re: 1984 C10 parting out*
 

no problem Bob, I'll post pics as soon as we get everything apart and cleaned up...thanks man...

Chuck.

Re: 1984 C10 parting out*
 

More stuff added...Check the list...

also, I'll have pictures up in a few...gotta eat some dinner first...;)

Re: 1984 C10 parting out*
 

how much do you want for the dash ac vent trim above the glove box and the metal strips that the door pulls bolt on to. shipped to 75703

Re: 1984 C10 parting out*
 

dash trim above the glove box $20 plus shipping...I'll throw in the metal strips for free if they're in the truck...gotta take the door panels off still...I'm assuming they are in there, doesn't look like the door panels have been off and it had straps so chances are they are in there...I'll check on a quote tomorrow...and I'll have pics of the stuff I pulled tonight up on here in a minute once I resize them...thanks...

Chuck.

Re: 1984 C10 parting out*
 

i ment the matching trim on the doors you can see them in the pics. sorry.

Re: 1984 C10 parting out*
 

it's cool...I just misunderstood...those are $20 for the set of both plus shipping...like I said I haven't gotten the door panels off, so I haven't gotten those strips off and cleaned up and taken pics of them...

Chuck.

Re: 1984 C10 parting out*
 

Pic 1 - AM/FM tape deck front
Pic 2 - GM sticker on side of tape deck
Pic 3 - A/C heater control missing fan speed knob
Pic 4 - 3 speed Shift indicator
Pic 5 - A/C ducts...defroster vents and heater box still in truck...will take pics when removed...

Re: 1984 C10 parting out*
 

Pic 1 - switches starting from left. Red lighted toggle switch $2, Brake light switch $2, Cruise control brake switch $2, Headlight switch w/knob.

Pic 2 - silver Glove box $5, column plastic piece $5, silver under column metal piece $5, 1984 Owner's manual $15 great shape

Pic 3 - 1984 Owner's manual great shape

Pic 4 - inside of glove box...silver paint and good latch...hinge broken and hole cut in box...can seperate latch if need be...

Pic 5 - A/C dash trim w/ silverado emblem...all studs still intact

Re: 1984 C10 parting out*
 

Pic 1 - Silverado emblem on A/C dash trim
Pic 2 - Factory dash speakers and mounts...$5 set
Pic 3 - silver ashtray w/ lighter...$5
Pic 4 - sunvisors
Pic 5 - B pillar trim

Re: 1984 C10 parting out*
 

what is spf?
what was in the glovebox? Trailer brake or cb?

Re: 1984 C10 parting out*
 

Pic 1 - small crack on bottom hole of driver's B pillar trim
Pic 2 - headliner trim
Pic 3 - crack on bottom of passenger's A pillar trim
Pic 4 - wiper arms
Pic 5 - Gauge cluster w/clock and voltmeter...clear plastic lens and black metal surround over gauges not included

Re: 1984 C10 parting out*
 

sold pending funds...

I know you can't send payment until I give you a shipping quote, but at least this way it's shows that it's saved for ya...I got pictures up of them too...

and the ashtray was stock nothing modified that I could tell...it did have a cb screwed to the roof at one time though...the bracket was still there...it's in the bed now...lol