The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988-1998 GMT400 Chevy & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=11)
-   -   OK 95 GMC parts (https://67-72chevytrucks.com/vboard/showthread.php?t=393316)

scotts62 03-21-2010 12:55 PM

95 GMC parts
 
Have some parts from my 95 single cab
-full interior (light gray) Seat(torn on drivers side), headliner, all plastics, door panels (door handles are bad) $150

Brake booster/master cylinder $50
5speed shifter housing $20
Cruise module $35
Wiper motor $25
All OBO
Engine parts 4.3 (everything but the serpentine setup)
Wiring--

Have other parts that i cant think of at the moment.. let me know if interested,
Ill take some pics asap



Thanks,

k5hart 03-21-2010 08:21 PM

Re: 95 GMC parts
 
What are you looking to get for the lowering kit? What all is included? I really need just the rear flip kit but would buy it all if necessary and the price is right.

scotts62 03-21-2010 10:05 PM

Re: 95 GMC parts
 
Pm sent

k5hart 03-22-2010 01:14 PM

Re: 95 GMC parts
 
PM sent back. I'm passing on the kit but a good deal for someone who needs it. Good luck with the sale.

wildmanaaron 03-24-2010 09:23 PM

Re: 95 GMC parts
 
If you want to scrap the cab or cut some pieces off of it I could use some things.

I need the steering column mount for my 95-up interior conversion.

-Aaron

scotts62 03-24-2010 10:30 PM

Re: 95 GMC parts
 
Quote:

Originally Posted by wildmanaaron (Post 3880121)
If you want to scrap the cab or cut some pieces off of it I could use some things.

I need the steering column mount for my 95-up interior conversion.

-Aaron

Need anything else? Its complete 95 interior. Ill check it out for ya when i get out at the shop.

scotts62 03-27-2010 08:45 PM

Re: 95 GMC parts
 
scrapped the cab and frame today, have all parts off of it and a 5-7 drop kit left.

wildmanaaron 03-29-2010 09:59 PM

Re: 95 GMC parts
 
Wish I could have got that steering column mount from that cab.

C-10 Addict 03-31-2010 08:33 AM

Re: 95 GMC parts
 
Do you have the plastic trim piece that goes around the dome light to the pillar where the seat belts mount? if so can is i see pics and how much shipped to 30047 thanks

scotts62 03-31-2010 06:00 PM

Re: 95 GMC parts
 
Quote:

Originally Posted by C-10 Addict (Post 3892567)
Do you have the plastic trim piece that goes around the dome light to the pillar where the seat belts mount? if so can is i see pics and how much shipped to 30047 thanks

Yes i have it, ill be able to take a pic tomorrow then will let you know.

DBear 04-05-2010 12:14 AM

Re: 95 GMC parts
 
still have front seat?

scotts62 04-05-2010 08:11 AM

Re: 95 GMC parts
 
Quote:

Originally Posted by DBear (Post 3901393)
still have front seat?

No i dont it was in bad shape.

scotts62 04-08-2010 06:22 PM

Re: 95 GMC parts
 
Quote:

Originally Posted by C-10 Addict (Post 3892567)
Do you have the plastic trim piece that goes around the dome light to the pillar where the seat belts mount? if so can is i see pics and how much shipped to 30047 thanks

Sorry i havent had much time to run to the shop and when i did i forgot the camera but i got a pic today.

http://i276.photobucket.com/albums/k...ruck/005-4.jpg

Matt_ks 04-09-2010 11:41 PM

Re: 95 GMC parts
 
how much u want for the drop kit?

scotts62 04-10-2010 09:39 AM

Re: 95 GMC parts
 
Quote:

Originally Posted by Matt_ks (Post 3911219)
how much u want for the drop kit?

Think i have it sold already but if it falls through ill let you know.

red71cheyenne 05-04-2010 07:22 PM

Re: 95 GMC parts
 
Is the dash cupholder the same as a Chevy? Looking for the slide in and out one in tan color.

scotts62 05-04-2010 09:41 PM

Re: 95 GMC parts
 
Quote:

Originally Posted by red71cheyenne (Post 3957683)
Is the dash cupholder the same as a Chevy? Looking for the slide in and out one in tan color.

Mine wasnt any good they broke it when they stole everything out of the truck :(

98lowtahoe 05-06-2010 01:06 PM

Re: 95 GMC parts
 
hey can u change the steering column from the air bad steering column to the old school column just curious

scotts62 05-06-2010 06:24 PM

Re: 95 GMC parts
 
Think so long as it is the 95^ steering column, mine has air bag in it..

98lowtahoe 05-06-2010 07:37 PM

Re: 95 GMC parts
 
My tahoe u know which one it is the blue one is a 98 think i could change it out i hate the air bag in want to get a custom wheel

scotts62 05-06-2010 10:42 PM

Re: 95 GMC parts
 
Yeah im sure you can take it off and put a custom one on with no problems.

wancosc356 05-07-2010 10:14 PM

Re: 95 GMC parts
 
Got a good grill?

scotts62 05-08-2010 07:40 PM

Re: 95 GMC parts
 
No was wrecked in the front.

wancosc356 05-10-2010 10:31 PM

Re: 95 GMC parts
 
Bummer. Thanks anyways.

new to this 05-16-2010 03:25 PM

Re: 95 GMC parts
 
Do you have the Bezel that goes around the instument cluster that holds the head light switch?

wancosc356 05-19-2010 10:09 PM

Re: 95 GMC parts
 
How about a gas pedal setup? I need one with the electronic setup, not the cable setup.

scotts62 05-20-2010 07:58 AM

Re: 95 GMC parts
 
Quote:

Originally Posted by new to this (Post 3979778)
Do you have the Bezel that goes around the instument cluster that holds the head light switch?

It was broken up from when it got stolen from me a while back.


Quote:

Originally Posted by wancosc356 (Post 3986495)
How about a gas pedal setup? I need one with the electronic setup, not the cable setup.

Um, ill have to look in the shop, i remember taking it out but now that i think about it it is a cable setup.

ironworker21 05-20-2010 07:28 PM

Re: 95 GMC parts
 
do you the stock front coil springs

scotts62 05-20-2010 08:05 PM

Re: 95 GMC parts
 
No they were dropped springs and arms.

DirtyDrew 06-01-2010 11:30 PM

Re: 95 GMC parts
 
do you have the lowering kit, grey armrests. the armrests are for the work truck with no buttons or switches in them?

faribran 06-16-2010 12:17 PM

Re: 95 GMC parts
 
do you have an exterior rear view mirror... i am in need of one to go on my 93 Silverado. if you do plz send a pic to faribran@centurytel.net.

thanks
Rich

scotts62 06-16-2010 05:34 PM

Re: 95 GMC parts
 
Quote:

Originally Posted by faribran (Post 4033605)
do you have an exterior rear view mirror... i am in need of one to go on my 93 Silverado. if you do plz send a pic to faribran@centurytel.net.

thanks
Rich

No sure dont i used them on my crew cab, sorry.

Bigg G 07-10-2010 08:26 AM

Re: 95 GMC parts
 
Do you have the ac/heat hvac control panel ?
I need a 95 only that works with no broken tabs.

If yes pics please .

scotts62 07-10-2010 08:51 AM

Re: 95 GMC parts
 
Im going out to shop now to finish up a paint job, ill look around, i think i still have it but not sure.

Scootin 81 C20 07-12-2010 12:39 AM

Re: 95 GMC parts
 
Hey Scott, do you happen to still have the glove box door assembly? The hinge on mine is broke.

scotts62 07-12-2010 07:50 AM

Re: 95 GMC parts
 
Quote:

Originally Posted by Bigg G (Post 4082014)
Do you have the ac/heat hvac control panel ?
I need a 95 only that works with no broken tabs.

If yes pics please .

No i cant find it so i must have tossed it or sold, i cant remember..


Quote:

Originally Posted by Scootin 81 C20 (Post 4084711)
Hey Scott, do you happen to still have the glove box door assembly? The hinge on mine is broke.

No i dont, mine was broke too.

Kurt L 07-31-2010 03:15 PM

Re: 95 GMC parts
 
do you have the lug nuts that hold the plastic lug covers on? if so i need all 20.

scotts62 07-31-2010 06:32 PM

Re: 95 GMC parts
 
No sorry i used them

(((((All parts are gone or used at this point)))))

67 chevy heaven 08-29-2012 09:11 PM

Re: 95 GMC parts
 
What about a rear drive shaft for a 95 GMC Serria 4X4 extended cab.
the total length is 74" from end to very end.
30 tooth spline.
Thanks if so contact me at SHAHOU8@aol.com very soon please!!!

lha1992 09-10-2012 05:48 AM

Re: 95 GMC parts
 
Quote:

Originally Posted by scotts62 (Post 3908873)
Sorry i havent had much time to run to the shop and when i did i forgot the camera but i got a pic today.

http://i276.photobucket.com/albums/k...ruck/005-4.jpg

Do you still have this or is it gone? Was wondering shipping to 98204


All times are GMT -4. The time now is 02:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com