Parting 64 C10 Custom
 

This is a 64 C10 that I rescued from the crusher last year... Its a 64 custom with 283 2bbl/3tree and posi rear. Fairly complete glass is all good, custom cab trim is nice, original keyed ign and door lock. If you see anything you need PM me or respond in this thread and we'll go from there.... Ill price everything WITH shipping included to simplify things.... Feel free to ask questions and I can take any additonal pics you may like.... Thanks in advance.... I cant seem to get the engine compartment pic to cooperate so I will post pics of under the hood tomorrow....
--Mike

**** I added a pic of the engine compartment in a below post!!!!

Re: Parting 64 C10 Custom
 

Interested in shipped price to 37821 of:
Grill
Instrument panel w/ all switches
windshield wipers
door handles

Does it happen to have fan shroud?

Re: Parting 64 C10 Custom
 

DPowers sent PM....

Re: Parting 64 C10 Custom
 

Mike, how nice are the custom cab corner trim parts? And how much? Eric

Re: Parting 64 C10 Custom
 

vent window assemblies to 92880

thanks

Re: Parting 64 C10 Custom
 

I am in need of a under bed spare tire carrier and the emergency brake parts Both sides (in drum area only photos attached). I live in NM 87124
Thanks!

Mike...

Re: Parting 64 C10 Custom
 

What will you ask for the door mirror assemblies;both.Also driver side vent window assembly if no stake has been made on it yet.

Re: Parting 64 C10 Custom
 

How does the grill and Radiator support look rust wise. Manly the radiator support by the mounting area to the frame. If they look good how much shipped to 31322.

Re: Parting 64 C10 Custom
 

I need the driver side window, regulator and the door latch with the handle on the inside...
lmk ASAP

Re: Parting 64 C10 Custom
 

If you still have it, I need a glove box door. Could you let me know how much shipped to 80138?

thx!

Re: Parting 64 C10 Custom
 

yo how much for the windshield??? shopped to 93514

Re: Parting 64 C10 Custom
 

Eric... here s the pics of the custom cab trim.... they are very nice, with the only real dings ont he driver side but they could be removed quite easily... nothing too serious.... PM sent

QBA sent PM

66GTO66C10... I dont think there is a spare tire carrier under the bed and you wouldnt want the e brake parts.... pretty rusty from sitting so long.... I will try to get a pic for you once I drag a jack back there and take off a drum... hopefully tomorrow if the weather holds out...

apache.... grill is real nice, one repaint with the chevrolet letters hand painted in... but no rust or dents that I can see... rad support has some rust, but I have not removed the battery tray yet to check that side... Ill try tomorrow...

Show SS12 Pm sent

Javadoc.. PM sent

64Cbagged... I would have no clue how to ship that for any reasonable cost... I would just be afraid it would break and for the cost to ship it in a crate you could prolly buy a brand new glass from one of the board vendors...JMO... I will work with you on it though if you want...

I hope thats everybody!!!
--Mike

Re: Parting 64 C10 Custom
 

apache.... grill is real nice, one repaint with the chevrolet letters hand painted in... but no rust or dents that I can see... rad support has some rust, but I have not removed the battery tray yet to check that side... Ill try tomorrow...


Not the grill it's self but what the grill bolts to (grill support). On the rad support i was wonder about where it bolts to the frame rust wise.. Thanks

Re: Parting 64 C10 Custom
 

apache ill look tomorrow for you...
--Mike

Re: Parting 64 C10 Custom
 

drivers door hardware, glass, and regulator SOLD!!! thanks ShowSS12!!!

Re: Parting 64 C10 Custom
 

PM sent

Re: Parting 64 C10 Custom
 

sorry low... sending an answer PM!!!!!

Re: Parting 64 C10 Custom
 

heres the pics of the grill ount for apache.... it is in about hte best shape I have seen for a 64-66 truck around here, but it would need some attention in a few small spots... nothing is through though...

I also added some pics of the grill... it is nicer than i thought!!!!!

--Mike

Re: Parting 64 C10 Custom
 

how much for the steering wheel,dash panel and buttons.v3v-1z9 surrey ,bc

Re: Parting 64 C10 Custom
 

The air cleaner assembly, please. Shipping to 73055. Thanks.

Re: Parting 64 C10 Custom
 

Winshield wiper arms, door mirror posts, oil tube filler top, dip stick and dipstick tube, driver door arm rest and, is the glass clear or "Soft ray"? Thanks.

Re: Parting 64 C10 Custom
 

Payment sent.Thanks!!

Re: Parting 64 C10 Custom
 

UPDATE!!!

Mirrors and drivers vent window assy SOLD!!!! Thank you Low79fx!!!!

Driver Door glass, regulator and innerhandle mechanism SOLD!!! Thanks Showss12

Gauges w/swtiches, exterior door handles, and wiper arms SOLD!!! Thanks DPowers

apache Im waiting

javadoc Im waiting

blackdawg sent PM

7373737373 sent PM

Re: Parting 64 C10 Custom
 

Sorry the net has been very slow here in the big sand box of afghainstan. I'm going to have to pass on the grill support, Thats what mine looks like and was wanting something in a little better shape. Sorry but thank you for your time...

Re: Parting 64 C10 Custom
 

UPDATE... I had told a few people that the truck did not have air cond and there for sdidnt have soft ray glass... Upon further investigation the truck does in fact have "soft ray" glass.... sorry about that...
--Mike

Re: Parting 64 C10 Custom
 

I need a rear end do you have any ideal the ratio? please quote price to Dallas Texas 76051. Thanks
Jim

Re: Parting 64 C10 Custom
 

no i dont and I would think that waould be WAYYY expensive to ship.... I would look for one locally, you guys seem to have all the nice trux down there in TX anyway:lol:....
--Mike

Re: Parting 64 C10 Custom
 

How much glass do you have left?

Re: Parting 64 C10 Custom
 

hows it goin! if available, how much for both inner fenders and radiator support? let me know when you get a chance...thanks!

Re: Parting 64 C10 Custom
 

How is the floor on the cab and the metal around the window frame? I am very intereseted and if the price is right I would drive up to pick it up.

Re: Parting 64 C10 Custom
 

73737373... I have that pass door glass and sm. rear window yet... windshield has a rock chip....

valero... inner fenders have some rust (not bad for around here) and the rad support is nice... but shipping could be a bi***... Ill work with you on it, but could be spendy....

ratty 65... floor is not good, but the frame around the window is very nice... If your close and need a road trip to get away, pm me and ill give you my ph number and come on up and check it out...

i "think" thats it for now...

--Mike

Re: Parting 64 C10 Custom
 

PM sent

Re: Parting 64 C10 Custom
 

Found everything I need this weekend locally. Thanks.

Re: Parting 64 C10 Custom
 

im in iterested in the doors for sale how much you letting them go for i have a 64 c10 with a cannon ball size dent in the side im 17 this is my first truck and my grandpa just gave it to me it was his

Re: Parting 64 C10 Custom
 

I think shipping could get a little interesting, but you have to check with greyhoud to see how go about it.... As much as I would like to sell them to you, I personally would look locally to see what you can find down there in TX ALOT less costly to ship.... see how much it would be to ship and then we'll talk price OK... Its cool your grandpa gave you his truck!!!!! you must post some pics!!!!!
--Mike

Re: Parting 64 C10 Custom
 

thank you so much for your hospitality

Re: Parting 64 C10 Custom
 

im looking for a fuse block with harness...got one?

Re: Parting 64 C10 Custom
 

Yes I do, how much of the wiring do you need????
--Mike

Re: Parting 64 C10 Custom
 

Hi! how much for the custom trim and tail lights? price sep. please. Thanks

Re: Parting 64 C10 Custom
 

sent pm