Serpentine belt conversions
 

This a used serpentine belt conversion is for small block chevys. The pics are my demo set up. The kit includes RH AC bracket, AC R-4 pump R134 or R12, LH Alt-power steering bracket, 100A Alt, power steering pump, belt tensioner, fan clutch, fan blade, clutch mounting studs & nuts, water pump pulley, crankshaft pulley w/bolts, braces and nuts & bolts. The RH bracket originally used 2 mounting bolts to the cylinder head. If your cylinder head only has the traditional one hole it will still work fine. I have sold many of these that only used one mounting hole with no problems. These will come cleaned and ready for detailing. I can detail a kit for 100.00 extra which will include media blasting and painting in satin black. I have four of these conversions for 225.00 plus shipping. Big block conversions also available.

Re: Serpentine belt conversions
 

would you consider selling this setup minus the power steering pump, pulley fan,clutch, and crank pulley?

Re: Serpentine belt conversions
 

Put me down for one.

How do you want to be paid?

Re: Serpentine belt conversions
 

Sure, 165.00 plus.

Re: Serpentine belt conversions
 

Will this fit 1970 4X4 radiator shroud, and the upper radiator hose. Do you have any with out A/C. What would shipping be to 30263. Any pics installed in trucks?

Re: Serpentine belt conversions
 

PM sent
No, it will not work with the deep 4X4 shroud. I'm thinking it would work with a 2WD shroud on a 4X4 truck. I have a local freind putting one in a 72 4X4 and he just got the 2WD shroud to see if it would work. Also won't with the factory upper metal tube. A non ac set up uses a dummy pulley in place of the ac pump therefor it uses the same belt. Sorry no pics of any installed. Shipping would be 67.66 Thanks, Tom

Re: Serpentine belt conversions
 

will this work with the regular water pump ordo i need a reverse flow?

Re: Serpentine belt conversions
 

It will require a reverse flow water pump. These pumps are available with or w/o the heater return port. I can supply it with a used pump but I would highly recommend a new one.

Re: Serpentine belt conversions
 

I am also interested. I have a 67/70 "327" I used different heads with holes for accessories. Looks like the alt bracket bolts on to a later model exhaust manifolds. mine are ram horn style, will this still work. Will there be any issue with crank pulley. What is shipping to 21863 Snow Hill,Md and is Paypal ok. Thanks Ed.

Re: Serpentine belt conversions
 

How much for a BB? Do you have any pics?

Re: Serpentine belt conversions
 

The bracket that goes to the exhaust manifold will not work with the ram horn manifolds with out mods. For those that have headers these conversions work fine. If still interested let me know, then I can get shipping cost.
Sorry, I sold the bbc kit local.

Thanks

Re: Serpentine belt conversions
 

Hey does manifold bracket hold the PS pump, or is it to stabilize the back of the ALT. I am trying to figure what Mods I will need to get this right. Thanks....Ed

Re: Serpentine belt conversions
 

so your selling basically jus the brackets and pullyes for 225 or does it come with the ac compressor, alternator, and power steering pump??

Re: Serpentine belt conversions
 

The bracket hits the manifold before it gets up to the head of the bolt. I can send a pic of the issue tomorrow night. It really helps support both. I have seen guys delete this bracket with no problems as far as I know.
The kit includes RH AC bracket, AC R-4 pump R134 or R12, LH Alt-power steering bracket, 100A Alt, power steering pump, belt tensioner, fan clutch, fan blade, clutch mounting studs & nuts, water pump pulley, crankshaft pulley w/bolts, braces and nuts & bolts.
You will need a new water pump, belt, and pig tail for alt.

Re: Serpentine belt conversions
 

I think I can make this work, cut the U shape off the tab and add a brace. Give me a shipping quote when you get a chance. .... Thanks Ed.

Re: Serpentine belt conversions
 

I am interested, but do not have the budget right now. Please let me know if you have more available in the future. Thanks!

Re: Serpentine belt conversions
 

Shipping via UPS is 68.00, Thanks

Re: Serpentine belt conversions
 

Hey Tom Let me know how to pay you or send me your paypal address.... Total was 293. is that correct......Thanks Ed

Re: Serpentine belt conversions
 

Do you still have some available? This would pretty much bolt up to a 70 gmc with a 350 right?

Re: Serpentine belt conversions
 

Subscribing to this in case you have more in the future

Re: Serpentine belt conversions
 

I would also be interested, Can you run the kit without the fan? Or does the fan hold the pulley on? I have electric fan so would not need fan and clutch if it will work like that. Oh and 134 would be my choice. Thanks Tim

Re: Serpentine belt conversions
 

Tim, it would work fine without the fan and clutch. Just use short bolts with HD flat washers to prevent the pulley from cracking over time. Thanks, Tom

Re: Serpentine belt conversions
 

Sold two still have two left. TTT

Re: Serpentine belt conversions
 

so how would I tell if this would fit on my 350?

Re: Serpentine belt conversions
 

Will this fit a 1976 SB 400 factory motor(no mods) with out A.C.?

Re: Serpentine belt conversions
 

Are you going to be getting anymore BBC ones?

Re: Serpentine belt conversions
 

It will fit any 350. If your engine is 86 or older there will be one hole in the front of the passenger side cylinder head you will not have. I used and sold these w/o using this mounting hole with no problems. These use the "long" water pump with reverse rotation. The sample that I have pictured is bolted to a common 69-86 350 engine. It will not work with 68 and older cylinder heads as they do not have accessory holes.
If you don't have AC there is a idler pulley that takes the place of the AC pump. I may have this idler pulley in place of the AC pump. Yes it will fit the SB 400.
I may have one off a 95. I'll check monday and let you know.

Thanks to all, Tom

Re: Serpentine belt conversions
 

i would be intersted in a big block set as well.

Re: Serpentine belt conversions
 

Hi, do you have any left? Also, where do I get the belt? If I want to use a local auto part store like auto zone, what would I ask for?

Also, I have an alternator and PS pump for a 350; would I be able to use those, or do I need to get the ones wit your kit?
Posted via Mobile Device

Re: Serpentine belt conversions
 

Yes I still have them. You would need to use the kit complete. Your alt and P/S will not fit. Thanks, Tom

Re: Serpentine belt conversions
 

ttt

Re: Serpentine belt conversions
 

PM sent

Re: Serpentine belt conversions
 

What year truck are the alt, PS pump, and A/C pump out of? Also what would shipping be to 32068(home) or 32257(bussiness addy)? Also are they new items or tested used ones?

Re: Serpentine belt conversions
 

Shipping to the bussiness is 63.80, I have several of these off 89-95. Thanks, Tom

Re: Serpentine belt conversions
 

Hey Tom,

What water pump does this use and can I find it locally? How much wiring trouble to replace old ext. reg. alt? Thanks

Re: Serpentine belt conversions
 

As far as parts go just pick a year, 89-95 pick-up C1500 or K1500. All the parts (water pump, idler pulleys, power steering pump, alternator, A/C compressor, pulleys, drive belt) for these serpentine systems are interchangeable.

Re: Serpentine belt conversions
 

I'm subscribing. Would love to get a setuo to finish my 350, but the little one's 1st birthday is very close and we have to have a party. I'll definitely be hitting you up when I get the funds.

Thanks,
Chris
Posted via Mobile Device

Re: Serpentine belt conversions
 

The water pump is very common that any parts house would stock. It fits any 88-95 C/K truck and some passenger cars. A sure way to identify the correct pump is that it will NOT have any accessory holes. Nothing bolts to the pump on these serpentine setups. These alternaters require a "exciter wire" which is a key on hot wire. You may want to consult a wiring wizard be sure how to do correctly.
Thanks, Tom

Re: Serpentine belt conversions
 

Got your payment info, will send payment out Monday. Thanks again!

Re: Serpentine belt conversions
 

Payment went out today!!