Re: '72 Blazer Part-out
Interested in the carpet strips front and rear. I will offer various pricing depending on the condition. PM me if you'd like.
|
Re: '72 Blazer Part-out
I'd be interested in the passenger seat brackets and passenger floor bracket. PM sent on pricing.
|
Re: '72 Blazer Part-out
Not sure if there are carpet strips in there, as there is no carpet in there. I'll have a look and get back to you.
Quote:
|
Re: '72 Blazer Part-out
I'd like the chrome transfer case shift lever if it is not rusty. Can you post a close up pick? Thanks.
|
Re: '72 Blazer Part-out
Got any pics of the front seat belts? Price?
|
Re: '72 Blazer Part-out
interested in the wiring for the dome lights. I need the wiring from the fuse box to the junction box that you plug the dome lights from the shell. and also the plate and if there is a junction box. thanks pm if any questions, thanks.
|
Re: '72 Blazer Part-out
Center console, 205 T case handle, and bracket that is attached to the heater box under the hood by the air cleaner for A/C. And the rear bumper brackets that are in back on the bumper.
Prices and condition please. Eric |
Re: '72 Blazer Part-out
How the rocker boxes? If not rotted I want them.
Posted via Mobile Device |
Re: '72 Blazer Part-out
And the hatch too?
Posted via Mobile Device |
Re: '72 Blazer Part-out
Rocker / torsion boxes are trashed I think. Will have a look and get back to you. Is the fiberglass top hatch what you're asking for?
Quote:
|
Re: '72 Blazer Part-out
You mean this one, right?…
http://i557.photobucket.com/albums/s...r/P1050803.jpg Let me know and I'll get you more pics. Quote:
|
Re: '72 Blazer Part-out
Yes the hatch for the top. And how's the fan shroud?
Posted via Mobile Device |
Re: '72 Blazer Part-out
Will get back to you tomorrow on all accounts. Not going to have time to go through it this evening. Stay tuned.
Quote:
|
Re: '72 Blazer Part-out
Interested in the water deflector with the hardware screws. Also, the a/c vent door on the passenger side. Can you take a pic of it? Thanks!
Posted via Mobile Device |
Re: '72 Blazer Part-out
per forum rules, prices need to be posted ASAP...Thanks
|
Re: '72 Blazer Part-out
Sorry, didn't realize there was a rule with that. I JUST got access to the truck and need to go back and get conditions on all of these parts everyone is interested in before I can post prices. Is it not OK for me to ask people to make offers rather than post a price on each part?
Quote:
|
Re: '72 Blazer Part-out
Quote:
Please review the seller and buyer codes http://67-72chevytrucks.com/vboard/a....php?f=115&a=8 Sellers Code of Conduct 67-72chevytrucks.com I. All for sale or trade ads must include the price. If you do not know the price of the item(s) you are selling, then you should do some research. Absolutely no auctions or bids. |
Re: '72 Blazer Part-out
Are the under dash lights still there?
|
Re: '72 Blazer Part-out
OK I'll get the prices up ASAP.
Quote:
|
Re: '72 Blazer Part-out
I'll take the passenger bucket complete with brackets pending price shipped. also the driver's seat brackets if they are factory.
|
Re: '72 Blazer Part-out
also door panels and air cleaner if 4bbl pending shipped price
|
Re: '72 Blazer Part-out
interested in the doors in the pics as well as the heater controls
|
Re: '72 Blazer Part-out
How is the top condition wise ??
|
Re: '72 Blazer Part-out
interested in gas petal and brake pad pending price
|
Re: '72 Blazer Part-out
interested in the single aftermarket temperature gauge and wiring. price?
|
Re: '72 Blazer Part-out
Price on transmission dipstick, hardtop brackets, rear bumper brackets, and glove box door lock if there is a key for it. Trevor
Posted via Mobile Device |
Re: '72 Blazer Part-out
Put me second for the Fan shroud pending price and condition.
I will also take the bump stops, pending Price and condition. Put me in line for the rear cargo hatch...pending price and condition. thanks, Mondo |
Re: '72 Blazer Part-out
Interested in the metal coolant tube.....
|
Re: '72 Blazer Part-out
Also interested in all the carb choke/linkage components including the tranny cable and related manifold brackets. Thanks again.
|
Re: '72 Blazer Part-out
Are you wanting the complete brake pedal and gas pedal assemblies? Or just parts of them? Top is in good shape. It's a single wall. Needs paint, but good other than that.
Quote:
|
Re: '72 Blazer Part-out
$25 shipped. Let me know.
Quote:
|
Re: '72 Blazer Part-out
Interested in metal rad tube if Deadhead passes.
|
Re: '72 Blazer Part-out
25 shipped sounds good . Did you have a closeup of the gauge? Also any word on price of wiring for the lights on the shell , looking for wiring all the way to the fuse box. Thanks
Posted via Mobile Device |
Re: '72 Blazer Part-out
*sigh* third in line for the radiator shroud, prod same palce in line for the rear hatch.
|
Re: '72 Blazer Part-out
still no pricing posted, so locking till he is ready w/ pricing....
|
Re: '72 Blazer Part-out
Any prices yet? Interested in the gas tank w/ all mounting hardware
|
Re: '72 Blazer Part-out
intrested in the front and rear bumper brackets and rear license plate mount
|
Re: '72 Blazer Part-out
I think someone local to him has bought the whole shebang.
|
Re: '72 Blazer Part-out
I do have a local friend who might buy the whole truck, but he mainly only needs the A/C system and a few other things. So the other parts are still going to go out separate. Here comes some pricing. Sorry it took me so long.
Quote:
|
All times are GMT -4. The time now is 07:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com