The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   80 Scottsdale build (https://67-72chevytrucks.com/vboard/showthread.php?t=543511)

UKNOWME 09-17-2012 07:31 PM

80 Scottsdale build
 
4 Attachment(s)
Picked up this 80 Scottsdale a month or so ago for 900 bucks. Drove the truck 300 miles to get it home with no problems but it leaks fluid like crazy. Plan to replace fenders and hood, install the stepside bed I picked up this past weekend, lower it, clean up the rallys (paint, new rings and caps), reseal the engine, probably paint a flat color then cruise it

gchemist 09-18-2012 10:01 AM

Re: 80 Scottsdale build
 
Hey, nice find. I was born in Clovis!! Maybe I'll can see next time I'm in the Texas Panhandle.

Driving it 300 miles is a great way to know it's true colors. Are those new doors?

UKNOWME 09-18-2012 11:01 AM

Re: 80 Scottsdale build
 
Yeah, I picked up the new door, new dash, new fiberglass bumper and the bed for 500.00

79 silverado 09-18-2012 01:57 PM

Re: 80 Scottsdale build
 
That front bumper looks like its molded for the 1981-up Style front end, not the 73-80... If it uses the factory mounting brackets you'll probably need to pick some of those up as well so it sits properly, and it may be kind of tight on the fenders unless you're switching to a 81-up front clip when you do the fenders/hood swap (but you would need to change the inner wheelwells and core support as well...)

UKNOWME 09-18-2012 04:23 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by 79 silverado (Post 5599237)
That front bumper looks like its molded for the 1981-up Style front end, not the 73-80... If it uses the factory mounting brackets you'll probably need to pick some of those up as well so it sits properly, and it may be kind of tight on the fenders unless you're switching to a 81-up front clip when you do the fenders/hood swap (but you would need to change the inner wheelwells and core support as well...)

Yeah wasn't sure what I was gonna do with it. I do have an 81 c10 but I'm not on that project at this time, lol. I may just set it to the side and use it at a later date

UKNOWME 10-25-2012 09:09 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
Removed the front clip today so we could pull the engine and trans and decide what I want to do with them. Hoping to just clean them up, reseal and reinstall. Maybe mild cam, intake and carb.
Posted via Mobile Device
Posted via Mobile Device

UKNOWME 10-25-2012 09:09 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
Posted via Mobile Device

UKNOWME 10-25-2012 09:12 PM

Re: 80 Scottsdale build
 
I can't get these pics to load from my phone. This sux
Posted via Mobile Device

UKNOWME 10-25-2012 09:17 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
Posted via Mobile Device
Posted via Mobile Device

UKNOWME 10-25-2012 09:19 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
Posted via Mobile Device

UKNOWME 11-13-2012 04:02 PM

Re: 80 Scottsdale build
 
3 Attachment(s)
Pulled the cab today so we can start the body work and suspension

UKNOWME 11-29-2012 06:59 PM

Re: 80 Scottsdale build
 
5 Attachment(s)
Some updated pics from the last week. I also have all the body components at a friends house in the paint booth. Installed drop spindles, springs and flip kit. Getting the motor put back together.

UKNOWME 11-29-2012 07:05 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
This is my inspiration. Planning on a satin orange and white paint job with staggered 15inch ralleys though. Sorry I couldn't get the picture to rotate

UKNOWME 11-29-2012 07:08 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
I meant to post this picture instead

chevybuilder18 11-29-2012 07:25 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by UKNOWME (Post 5597894)
Picked up this 80 Scottsdale a month or so ago for 900 bucks. Drove the truck 300 miles to get it home with no problems but it leaks fluid like crazy. Plan to replace fenders and hood, install the stepside bed I picked up this past weekend, lower it, clean up the rallys (paint, new rings and caps), reseal the engine, probably paint a flat color then cruise it

whats wrong with your hood?

UKNOWME 11-29-2012 08:18 PM

Re: 80 Scottsdale build
 
The usual cracks in the middle

chevybuilder18 11-29-2012 08:22 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
Quote:

Originally Posted by uknowme (Post 5667956)
posted via mobile device

th400!

chevybuilder18 11-29-2012 08:25 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by UKNOWME (Post 5730684)
The usual cracks in the middle

is it the metal cracking?

UKNOWME 11-29-2012 08:27 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by chevybuilder18 (Post 5730583)
whats wrong with your hood?

Yes in the both side in the middle

chevybuilder18 11-29-2012 08:31 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by UKNOWME (Post 5730702)
Yes in the both side in the middle

looked pretty sharp. wish our hoods werent so fragile

UKNOWME 11-29-2012 08:36 PM

Re: 80 Scottsdale build
 
Thanks! Putting a steel cowl hood on now

UKNOWME 11-29-2012 08:37 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by chevybuilder18 (Post 5730688)
th400!

turbo 350

chevybuilder18 11-29-2012 08:39 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by UKNOWME (Post 5730731)
Thanks! Putting a steel cowl hood on now

and a huge sky scrapping intake to match? ;)

UKNOWME 11-29-2012 08:44 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by chevybuilder18 (Post 5730688)
th400!

No as you can tell in the engine picture its nothing special on the intake. I'm only using the cowl hood because i already have it and am trying to build this on a budget

UKNOWME 11-29-2012 08:45 PM

Re: 80 Scottsdale build
 
I am actually robbing the hood from my 78 Jimmy

chevybuilder18 11-29-2012 09:24 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by UKNOWME (Post 5730750)
I am actually robbing the hood from my 78 Jimmy

oh yea the TH350 had the slight angle at the right side:dohh: lol but there pretty distinctive. liking the build so far. Lol i was just kiddin about the huge intake, i gotta eccentric way of thinkin:smoke:

UKNOWME 12-13-2012 08:25 PM

Re: 80 Scottsdale build
 
5 Attachment(s)
Some pics from the past week

UKNOWME 12-13-2012 08:34 PM

Re: 80 Scottsdale build
 
5 Attachment(s)
#2

chevybuilder18 12-14-2012 02:23 AM

Re: 80 Scottsdale build
 
:smoke: lookin sweet cant wait for more

UKNOWME 12-15-2012 02:47 AM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by chevybuilder18 (Post 5757445)
:smoke: lookin sweet cant wait for more

Thanks!
Posted via Mobile Device

northeimcustom 12-17-2012 07:36 PM

Re: 80 Scottsdale build
 
keep up the good work, and pic updates, looks nice!

68Timber 12-17-2012 07:49 PM

Re: 80 Scottsdale build
 
Love orange/white - subd.
Posted via Mobile Device

cory d 12-17-2012 08:11 PM

Re: 80 Scottsdale build
 
so far, i love it!

UKNOWME 12-19-2012 07:06 PM

Re: 80 Scottsdale build
 
2 Attachment(s)
Frame cleaned and painted. Engine and trans installed with my shorty headers.

chevybuilder18 01-21-2013 06:34 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by UKNOWME (Post 5767537)
Frame cleaned and painted. Engine and trans installed with my shorty headers.

looks good. im gonna wait till i have a garage and a extra car till i rip my cab and clip off the frame. let us know some more! keep up the good work!

UKNOWME 02-16-2013 03:38 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
Ordered these wheels. Not sure if I'm gonna use these or my original plan of rally wheels! What do you think?
Posted via Mobile Device
Posted via Mobile Device

lilpoindexter 02-16-2013 06:02 PM

Re: 80 Scottsdale build
 
Original rallies, or something else that looks like original rallies.

muddnutz 02-16-2013 08:37 PM

Re: 80 Scottsdale build
 
Awesome work. Use the new ones. They'll look killer on there with the flat paint
Posted via Mobile Device

UKNOWME 02-17-2013 10:56 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by muddnutz (Post 5893134)
Awesome work. Use the new ones. They'll look killer on there with the flat paint
Posted via Mobile Device

That's what I thought too! Guess if I don't like them I'll stick my original plan. I could always use them on my other squares
Posted via Mobile Device

northeimcustom 02-17-2013 11:31 PM

Re: 80 Scottsdale build
 
New wheels for sure!


All times are GMT -4. The time now is 10:07 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com