69/70 GMC 3/4 ton Big Block Camper Special part out
 

Just in today, was a real decent optioned truck before it was hit.

Cab a little banged up, super solid shape AC/ high hump auto $500

Tool box door, has some rust , straight with all 3 pieces of trim with or without fiberglass insert $175 + shipping

Tool box bed side straight, no rust $250

Bed floor, very good condition $400

Front bed panel $100 no dents

Passenger door $150 has a little bend at front lip, no rust or speaker hole
AC brackets $250

Alternator brackets $90

Also has driver auxiliary fuel tank with the neck that points towards the rear tire, so a hole is not needed to be cut in the bed, A member from Tucson emailed me a while back looking for this tank, I have lost his PM, so if its you, I have it now!

Has 2 rear 16" x 6.5 factory wheels

No tach, no tilt

Turbo 400

Dana 60 leaf spring rear

Nice looking bed floor $300

Will get a pic of the spid tomorrow.

Anything else ask & I'll price.

Also for parts locally.

Thanks,
Tom

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Did you have bolts and backer plate for the side mirrors. If you had picture and price. Thanks
Posted via Mobile Device

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Some more pics

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Interested in the mirrors also. Did you still have both?
Posted via Mobile Device

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

More pics of the gas tank & tool box door, hinges are in good shape on the tool box door

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

I think both mirrors, arms & backing plates & bolts are there $50 shipped.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Price on Hub caps? I see the rears are on in the photos. Are there fronts?

Original radio with speaker? Only if the face is super clean.

Glove box door?

Guage Cluster?

Shipped to 48371


I will be off line until this afternoon. Please give me a chance to respond to your response.

Thank you

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Interested in custom camper door emblems. Also if interior is saddle I would
be interested in armrests & hardware. Any front end parts left? I need driver
side fender eyebrow molding. Jamie 71 :gmc2: Longhorn

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Oops i forgot....if this is a sierra are the 2500 sierra fender emblems available?
Can I see close up pic of gas cap? Jamie 71 :gmc2: Longhorn

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

mirrors if they get to me . 33578

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Tom, interested in the cab. how bad is the damage/rust? looks like a cab corner might fix most of it on the passenger side? how about underneath?

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

I will jump in for the hubcaps.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Yeah Tom,
let me know if the rear window is scratch free, sof-ray, the trimm around it is ding free and how much to get it to me 93013. Thanks
mo

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

T bone, there are only the 2 rear caps, I'll get them off & get better pics
The AM radio is there, will get pics, I'm pretty sure the factory speaker will be dust, will also check the cluster.
Glove box door will go with the cab

Oddfire, will check condition of the door scripts, interior is blue & will get pics of the gas cap.

jjzepplin your in line for the mirrors

nobolt cab is almost rust free, floor, cab supports, outer rockers look good, I haven't had a chance to pull up the carpet to check the bottom of the kick panels yet, the area behind the passenger door will need attention.

too much stuff your in line on the hub caps.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Front clip was gone, but I have this L/H eyebrow from the garage, good chrome, a couple dings in it, 2 clips on the back $32 shipped

Mo, I'll check the glass.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

how is the glass on the mirrors; pm payment info. thanks

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Thank you,

Waiting for pictures and prices.
Tom

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

I'll take the custom camper emblems and the saddle gas tank if it gets to me! Do you have the sending unit and the aux. Switch to go with the tank? Also is the back bumper straight? How much for the bumper? How much shipped to 78552? Thanks.....dwt.
Posted via Mobile Device

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Tom How much for the A/C vac can in its little bracket thats still on the A/C box,
also does it have the metal case speedo cable?
How much shipped?

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Tom also put me in line for the mirrors and brackets! Thanks....dwt.
Posted via Mobile Device

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Engine stands? I see one for sure...

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

i'll take the cab Tom... pending a distaster under the carpets. i sent a PM.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

nobolt, here's pics of the cab.
It has very little rust, there is surface rust under the floor mat, with some pitting, no rust through.
Rockers are solid, cab supports solid, inner rockers good, no rust in the roof, cab has been hit in the back from the bed & is tight at the bottom of the door opening, both sides.
Cab includes the cab, the ashtray & the glove box door, everything else will be taken out.
We may have someone coming back to Michigan & might have room to bring this back, if interested.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

More cab pics.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

more pics

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Pics

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

More

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

The last of the pics

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

WOW, that is a really clean cab. All the chrome on the cab is in good shape as well. Any pics of the underside of the doors?

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Photos look good. Just waiting for the prices.

PM me please.

Thank you

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

i need bench seat adjuster springs ..one on handleto pull it back in place-the large spring on drivers adjuster track to back of seat frame and small center spring that hold adjuster rod.if you have them p.m. me with price.thanks

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Tbone
Hub cap $20 + the other free, it has holes in it.

Radio looks good, don't know if works $40

Gauge cluster has about 46K in good shape $45
+ $16 shipping

Mo back window & trim looks good, nice driver quality, trim looks pretty straight, no guarantee it is totally scratch free $60

There is only 1 mirror head , the other is gone $40 shipped, these are the stainless mirror arms, they are likely after market, I would include a pair of aftermarket round chrome mirrors & new door gaskets with this deal for $60 shipped.

Custom camper emblems $50 shipped

burb71, will have to check.


Only 1 engine stand, we had a single, will check to see if we can make a pair.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Thanks for the info. Sent you a PM.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

yikes on the scorpions!

Price on the interior door panels to 55020 if they're any good.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Tom ill pass on the glass. i have a decent driver now but want a better one. Would you separate the trim?
need drivers sidevent window if sof-ray shipped for both to 93013
thanks

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Good eye on the scorps, I'm sure glad they were dead already, they were some big ones!

I'll check on that stuff, door panels look good at first glance, Lets make sure they will come off the door.

Mo, I'll separate the trim & I think that driver wing is in good shape .

sasquach I should have those springs, if you didn't locate them in your wtb thread.

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Let me know on the caps and the single engine stand if you can't make a pair. (or a pair)
Eric

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Ill get in line for engine mount. I have a single d/s
Posted via Mobile Device

Re: 69/70 GMC 3/4 ton Big Block Camper Special part out
 

Tom, interested in the toolbox. My po welded in a patch and there is nothing left of the original tb. So, I need the whole shooting match, the bedside from just from the lower body/trim line down (or, suppose I could take the whole thing, but would sure be easier to take/ship just the bare minimum and weld it in (don't really want to replace the whole bedside as it is original and in great shape, other than missing the tb)) and the toolbox door, trim, box, etc. Do you have a combo price for the partial bedside and the tb door/box/ all bedside trim fwd of the wheel well (no shipping, if we agree on a price, I will come pick it up so you don't have to worry about shipping and packaging anything. Will be passing thru mesa in the very future)? So, pls put me 1st in line for these items til we sort details (unless I missed where someone else asked for them, trying to read all this on a iPhone!). Thanks!
Posted via Mobile Device