cutting up a 72 k5
4 Attachment(s)
spare tire carrier and cover $100+ride obo, filler neck $50+ shipping, cutting up any and all. ask and i will try to answer. have frame rails too. all brackets still there. thanks, glen
|
Re: cutting up a 72 k5
Ill take the carrier and cover
|
Re: cutting up a 72 k5
I might be interested in the whole tub! Any more pics of the rear bed area? Also condition of the frame with pics.
Posted via Mobile Device |
Re: cutting up a 72 k5
pm paypal info on tire carrier and neck.
|
Re: cutting up a 72 k5
Do you have the rear seat seatbelt brackets and the underside renforcing bracket? Thanks Carey
|
Re: cutting up a 72 k5
Hows the quarters
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
how much for skid plate
|
Re: cutting up a 72 k5
does it come with the cross member Glen
|
Re: cutting up a 72 k5
quarters were not nice enough to fool with. it has a hickey swinging tire carrier with jerry can mount 95% complete i will list in a couple days. there were almost 2 of them. all brackets inner and outer.
|
Re: cutting up a 72 k5
doors any good?
|
Re: cutting up a 72 k5
i have pics on another thread from the other day. look on my statistics and it will be near the top. make me an offer and yes, x member is included.
|
Re: cutting up a 72 k5
doors are whooped! panels and woodgrain are in mail to get restored, vents are driver.
|
Re: cutting up a 72 k5
Intersted in the tire carrier pending pics
|
Re: cutting up a 72 k5
pass on doors
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
Glen need more pics LOL
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
i go to work in the dark so it will be tomorrow night before i can load some more.
|
Re: cutting up a 72 k5
How much total for the gas filler neck shipped to 65251?
|
Re: cutting up a 72 k5
Any hatch hardware from the top?
Complete hatch? |
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
Quote:
Just let me know. I want your ECE panhard bracket from your other thread. So maybe we can put everything in one box. Send me a PM and I will get back to you. Thanks. |
Re: cutting up a 72 k5
4am is coming fast. will check in early and get pics after work tomorrow. thanks
|
Re: cutting up a 72 k5
3 Attachment(s)
skid plate from other post, second filler and vent with quarter pics for keith, and a high hump
|
Re: cutting up a 72 k5
Also interested in hickey tire carrier. I want to put one on the back of my k20. Trevor
Posted via Mobile Device |
Re: cutting up a 72 k5
2 Attachment(s)
I will take the first fill tube ($50) you listed,... and the ECE panhard brackets ($10).
Let me know a total with shipping. Thanks. |
Re: cutting up a 72 k5
How's the grill?
Posted via Mobile Device |
Re: cutting up a 72 k5
The 69 grill
Posted via Mobile Device |
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
Does it have decent front seat belts?
|
Re: cutting up a 72 k5
It looks like it may have the carpet hold down strips what condition are they in? Thanks
|
Re: cutting up a 72 k5
seatbelts are gone and hold downs are rough.
|
Re: cutting up a 72 k5
5 Attachment(s)
here is second fill pipe and vent. this one will come with an 8"x8" section of quarter to weld in a truck box side to put tank under bed. $120+ride obo. no back seat. floor brackets look ok, can cut sections of floor out as needed. and an extra chunk of rear quarter minus tire brackets. $25+ ride
|
Re: cutting up a 72 k5
Rough as in rusty or all bent up any pictures?
|
Re: cutting up a 72 k5
4 Attachment(s)
windshield frame looks good. will cut wherever. $150+shipping. ac dash uncut $70+ride. bucket seat brackets as pictured $125 or $550 with seats.
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
will try to box up stuff tomorrow after work and get shipping info.
|
Re: cutting up a 72 k5
how is the vertical section of sheetmetal behind the seats?
|
All times are GMT -4. The time now is 04:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com