Misc. 1947-1953 Parts
 

I have some parts that are for the 1947-1953 Chevy body style and may fit more or might fit only one or 2 years with in that body style. I do not know this body style very well. If you have any questions or want more pictures just let me know. All prices are plus shipping when needed. Hoods, rear fender and some other large items will not be shipped.

1. Hood- nice shape but the center trim is rusted SOLD
2. Hood- decent hood but has a hole in the front $50
3. Fender right rear- sandblasted and solid but dented BAD $30
4. Quad Gauge- working condition unknown $20
5. Grill bars- painted parts are good exept one is dented in the center, chrome part is poor and bent up $40 for all 3
6. Bumper filler panel- one end is in nice shape but the other is cut off $10
7. Hood Hinges - rusty $10 pair
8. Hood Hinges - sand blasted SOLD
9. Defrost Vents- $10
10. Windshield Center Strip - chrome w/ screws and rear $20
11. Bed to Running Board Filler Panel - $10 rougher one, $20 for better one
12. Shock Brackets $5 each
13. Pedal- clutch? $5
14. Parking Light housings W/ chrome trim $20 pair
15. Bumper Brackets $40 pair
16. Bracket that goes behind the running board to bed filler panel $20 pair
17. anything else you see, just ask

Thanks for looking. PLEASE post questions to the thread as per the board rules.

Re: Misc. 1947-1953 Parts
 

More pictures.

Re: Misc. 1947-1953 Parts
 

and a few more.

Re: Misc. 1947-1953 Parts
 

pm sent

Re: Misc. 1947-1953 Parts
 

There are 3 running board brackets but I am not sure if they are from a 1/2 ton or a big truck. I think they are from a 1 1/2 ton truck. $10.00 each or $25 for all 3 plus shipping. They look solid but do have couple issues. I can get you some pictures. I can also get measurements if that will help decide if they will work on a 1/2 ton or whatever you have. Thanks

Re: Misc. 1947-1953 Parts
 

I have a 3/4t, are the bolt retainers solid? can you measure them? I will verify mine to make sure they fit.
Thanks,

Re: Misc. 1947-1953 Parts
 

Here are some pictures. from tip to tip 1 is approx. 19 1/2" and 2 are approx. 20 1/2" If you need more just let me know.

Re: Misc. 1947-1953 Parts
 

A few more.

Re: Misc. 1947-1953 Parts
 

I'll take'em, please pm the payment details, i prefer paypal if that is ok with you.
Thanks,
Chuck

Re: Misc. 1947-1953 Parts
 

Running board brackets are sold and sent out UPS. Thanks

Re: Misc. 1947-1953 Parts
 

Any thoughts on shipping the rear fender to 86004? i have no idea what it would take to ship it to me.
Nik

Re: Misc. 1947-1953 Parts
 

I do not have access to Grayhound shipping and I would think UPS/ FedEx would be high. It is pretty rough (dents, ect.) even if it is not real rusty. I will see if I have a box or something I could use and get you an idea.

Re: Misc. 1947-1953 Parts
 

I am looking for 52 complete wiper arms and parts (everything that goes under the dash that has to do with the wipers)

Re: Misc. 1947-1953 Parts
 

The only items for the wipers that I have at this time are 1 wiper arm and 1 wiper pivot (part that bolts into the cab) I can get better pictures but I am not sure how good the pivot part is. I will try to get pictures tonight. Thanks

Re: Misc. 1947-1953 Parts
 

I think that I'll pass on the fender due to shipping difficulty. But, do you have a bed to running board filler panel for the passenger side? If so, I'd be interested in that and the parking light housings shipped to 86004.

Thanks,
Nik

Re: Misc. 1947-1953 Parts
 

These are the only items that I have. The nut has poor chrome. If interested then they would be $8.00 shipped USPS to 48 states.

Nik, This is the only passenger side panel I have. It is rough on the ends. Do you need the bracket on the back side of it?
Parking lights $20.00 pair
Filler panel $ just the added cost of shipping
Bracket behind the panel $10.00
Shipping $12.66 USPS Standard shipping (1 week?) or $16.85 USPS Priority Mail (3 day)

Re: Misc. 1947-1953 Parts
 

more pictures

Re: Misc. 1947-1953 Parts
 

one more

Re: Misc. 1947-1953 Parts
 

Do you have a salvageable seat?

Re: Misc. 1947-1953 Parts
 

Sorry but I do not.

Welcome to the board fellow Indiana resident.

Re: Misc. 1947-1953 Parts
 

Thanks, I'm a ways from needing a seat anyway, just saw how close you are so thought I'd check.
Thanks for the welcome, I've been on another chevy trucks forum, still am but, this one is much larger, with alot of good advice.

Re: Misc. 1947-1953 Parts
 

What part of Indiana are you in? There is a lot of knowledge here. Enjoy

Re: Misc. 1947-1953 Parts
 

I'm about 40 miles west of Indy, kinda out in the sticks.

Re: Misc. 1947-1953 Parts
 

Can I talk you into $20 shipped for the quad gauge? Zip code 98801.

Andrew

Re: Misc. 1947-1953 Parts
 

Sorry, Andrew but since the shipping will be around $12.00, I will not accept your offer. Since I do not have any way to know if these work or not I will go $27.00 shipped and insured to you.

Re: Misc. 1947-1953 Parts
 

Are the defroster vents the pieces that go around the windshield?

Re: Misc. 1947-1953 Parts
 

I think I only have one. It is in the headlight ring in both of these pictures. If you are interested then I can get better pictures tomorrow night. Thanks

Re: Misc. 1947-1953 Parts
 

Found mine.

Re: Misc. 1947-1953 Parts
 

No problem. Thanks for asking.

Re: Misc. 1947-1953 Parts
 

$25.00 shipped for the quad gauge?

Let me know. Do you take paypal?

Thank you,
Tom

Re: Misc. 1947-1953 Parts
 

Let me know your zip code so I can figure the shipping cost. I have said earlier that I will go $15 plus shipping so lets see waht that is. Yes I do take Pay Pal. I can figure shipping tonight.

Thanks,
Todd

Re: Misc. 1947-1953 Parts
 

Thank you Todd,

I am at 48371 Oxford MI. let me know the total when you can.

Take care,
Tom

Re: Misc. 1947-1953 Parts
 

Shipping to you is only $7.50 since we are closer to each other so $22.50 shipped to you. I guess I should have taken the $25 shipped that you offered. LOL Let me know, Thanks

Re: Misc. 1947-1953 Parts
 

Hi Todd,

$25.00 is fine. Send me your paypal. By the way, I appreciate what you are doing on the Underhalin project. I wish I could do more. You guys are awesome.

Pm me with you info and I will send my address.
Take care and thanks,
Tom

Re: Misc. 1947-1953 Parts
 

PM sent. Tom, we all whish we could do more but everyone can only do what we can do. Rus and Chuck are great guys and I am glad that everyone has got behind them for this great cause. The original guys involve had a great idea and I am glad that it is finally able to come together. Thanks again, Todd

Re: Misc. 1947-1953 Parts
 

What condition is the windshield center strip in ? I am looking for one with no dings and will polish up good . Any better pic of yours ? thanks

Re: Misc. 1947-1953 Parts
 

Here are the only pictures that I have saved so I will get more tomorrow after work. Thanks

Re: Misc. 1947-1953 Parts
 

Here are somemore pictures. Let me know if you want more

Re: Misc. 1947-1953 Parts
 

One more

Re: Misc. 1947-1953 Parts
 

It's kind of hard to tell .Does it have any dents or deep scratches ? I need something that will polish up good . Let me know thanks .