Just another bagged and ls swapped c10
1 Attachment(s)
this is where it started. 71 long bed.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Picked up the 5.3
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Got it moved over to its build spot
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Started pulling it apart
|
Re: Just another bagged and ls swapped c10
2 Attachment(s)
Got the cab off.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Notched out the front cross member
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Got the lower control arms ready for the bags.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Oh yeah, I am turning it into a short bed.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
she cut up
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Got everything tacked. Double checked all measurements and everything is perfectly level.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Frame welded and a reinforcement plate is welded in in the inside. Started mocking up the trans cross member.
|
Re: Just another bagged and ls swapped c10
Whats the cross member notch for?
|
Re: Just another bagged and ls swapped c10
The notch will get me 3'' closer to the ground. You can buy the drop members, but i have a lot of time on my hands.
|
Re: Just another bagged and ls swapped c10
Quote:
What are you doing for steering? |
Re: Just another bagged and ls swapped c10
Awesome work so far.. Coming along nicely.
|
Re: Just another bagged and ls swapped c10
Quote:
Quote:
|
Re: Just another bagged and ls swapped c10
Seen it a thousand times, boring. Just kidding! Thanks for sharing your build. Looks like it's going to be a nice truck. I like your method of raising the front crossmember. I haven't seen that exact approach before.
|
Re: Just another bagged and ls swapped c10
I have saw this way done a couple times. Once I get everything mocked up, ill see if it meets my goal for how low i want it to be. If not i will Z the frame up front.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Started building the transmission cross member.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
I went ahead and z'd the frame. Started boxing in the front portion of the frame.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Started building the step notch.
|
Re: Just another bagged and ls swapped c10
2 Attachment(s)
She going to be low. Still a lot of work to do on the notch. 4 link is next.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Turned the axles down so I could use 2001 Silverado rear disc brakes. Just need to fab the mounting bracket.
|
Re: Just another bagged and ls swapped c10
did you buy a 4 link kit for the rear or make your own?
|
Re: Just another bagged and ls swapped c10
Its a switch suspension 4 link kit.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Ended up swapping out to the Tahoe twin piston calipers.
|
Re: Just another bagged and ls swapped c10
2 Attachment(s)
Put the cab back on to check fitment.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Scored a Choppin Block back half for a good deal, so I am going to use it on this build, and use the one I built for another project.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Base/clear on the back half
|
Re: Just another bagged and ls swapped c10
2 Attachment(s)
Gettin there!
|
Re: Just another bagged and ls swapped c10
Lookin' good. I love that C-B stuff.
|
Re: Just another bagged and ls swapped c10
2 Attachment(s)
More pieces to the puzzle!
|
Re: Just another bagged and ls swapped c10
Looking good!
|
Re: Just another bagged and ls swapped c10
Quote:
|
Re: Just another bagged and ls swapped c10
Nice job so far, where did you get the fuel tank?
|
Re: Just another bagged and ls swapped c10
Quote:
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Tanks fit great 👌
|
Re: Just another bagged and ls swapped c10
@c10jmac @pinky6872 you guys are my hero.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Ready to tackle some much needed floor pan repair.
|
Re: Just another bagged and ls swapped c10
1 Attachment(s)
Started to test fit/shape the drivers side into place.
|
All times are GMT -4. The time now is 08:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com