Getting hood hinge springs back on.
 

Assuming I get my grill back on without too much trouble (see my other thread tonight on that), do you put the hood hinges on first and then put on the hinge springs or do you put the spring onto the hinges first and then put both onto the truck?

Re: Getting hood hinge springs back on.
 

I would mount hinge first then add the springs.

Re: Getting hood hinge springs back on.
 

With the hinges mounted I use an old hay hook to keep the fingers out of the way

Re: Getting hood hinge springs back on.
 

I don't have a hay hook. I use a loop of 1'' nylon tubular webbing like climbers use, and make a 3' long sling. I hook one end of the sling on the spring hook end, put one foot on the front bumper and lean back, pulling on the spring and putting the spring onto the upper hinge notch.

Re: Getting hood hinge springs back on.
 

Need pictures! We prefer video...

Re: Getting hood hinge springs back on.
 

Use cherry picker super easy

Re: Getting hood hinge springs back on.
 

this is the way I have done this in the past, just be sure to use good zip ties. I set this up with bad ties just for the photo. I use my clamps in reverse.

Re: Getting hood hinge springs back on.
 

Dude, if I was that much into high tech, I'd drive a late model car, not an ''old'' pickup.

Re: Getting hood hinge springs back on.
 

Quick links would be safer. Other wise, good concept.

Re: Getting hood hinge springs back on.
 

Great Idea!
Carabiner.
http://www.swissproductsonline.com/c...nox-80x8mm.jpg

Re: Getting hood hinge springs back on.
 

Great suggestions guys, thanks!

Dad and I made big progress today on the fenders, we may be ready for the hood in a day or so.

Re: Getting hood hinge springs back on.
 

Perfect. Just use the steel ones. The cheezy aluminum 'biners you get with the fake-Sigg water bottles will fail on you.

Re: Getting hood hinge springs back on.
 

I made use of the steel posts I set to paint car parts, I mean for my wife's clothe's line, some chain and quick links, and a ratchet tie down or two.

Edit, I should mention I tied the spring up first, just in case (yikes).

Re: Getting hood hinge springs back on.
 

I put the springs on before I put the hinges on the truck. I put the hinge in a vise and use a very large pair of 'truck' brake spring pliers. Works every time!

Re: Getting hood hinge springs back on.
 

That's funny...but we do love pictures!

Re: Getting hood hinge springs back on.
 

You may very well be older than I am...

Please have a child, grandchild or great grandchild take video of you putting springs on the hinges. This could be fun to watch!

Bill

Re: Getting hood hinge springs back on.
 

Still single after all these years.
Besides, shooting a 5 minute instructional flick in 16mm, then developing it, and running it on a telecine to transcribe to VHS, then converting VHS to floppy disc, then floppy to whatever is next, for an uploadable format, is technologically unfeasable.
Sorry.
I've had this truck since I was 23.

Printed directions... What's so difficult?

Re: Getting hood hinge springs back on.
 

Some guys bolt the hinge to the fender then hook the spring at the back of the hinge and use an old fan belt to pull the spring forward, (extend it) far enough to hook on the front of the hinge. Back before high tech was a thing. ;)

Re: Getting hood hinge springs back on.
 

Sounds familiar. I've also used my service web belt.

Re: Getting hood hinge springs back on.
 

Adapt or perish!

Re: Getting hood hinge springs back on.
 

But video is so much more fun sometimes. Redneck videos are the greatest!

Re: Getting hood hinge springs back on.
 

Thank you all Again for your posts.
Web sling and my little weight pulled it off and new ones back on.

Re: Getting hood hinge springs back on.
 

I just use a piece of rope about 4’ long . Hook the spring on the hinge ,double up the rope , run it thru the other end of the spring , pull it back with one hand and slip the hook in the slot on the inner fender bracket. Easy peezy

Re: Getting hood hinge springs back on.
 

It really doesn't take that much pull to reload a hood spring, I use an old seat belt with the chrome male end with the hole in it to pull the spring.
just like this..
https://www.youtube.com/watch?v=bpspWtE26Iw

Re: Getting hood hinge springs back on.
 

Don't get easier than that.

Re: Getting hood hinge springs back on.
 

:lol: Good one! :lol:

Re: Getting hood hinge springs back on.
 

I stick a bunch of big washers between every coil. Big thick ones. Then when you get it on just shut the hood and they all fall out.
Count them so you know how many to pick up. Sometimes one will fall on a exhaust manifold or on the frame.

Re: Getting hood hinge springs back on.
 

So weird, I’ve always just pulled them on bare handed.










Not lol

Re: Getting hood hinge springs back on.
 

I do it in a vise as well. Then carry the assembled hinge to the truck.
Just buy a digital camera. Figuring out how to use it is a lot simpler than going into a carburetor. Definitel 100x easier than whatever all that I'd know nothing about you described.

Printed instructions were good, we got it. That's why he wanted a video. To "see" you doing it for entertainment. Wanted to see the movie after reading the book :cool:
Or just buy a smart phone. I could take this advise. It'll happen, just hasn't yet. My flipper is incredibly rugged and reliable. It may last forever. That's a hard thing to walk away from.

Re: Getting hood hinge springs back on.
 

Re: Getting hood hinge springs back on.
 

This is what i did.Works really slick. Dont forget your safety glasses.

Re: Getting hood hinge springs back on.
 

I bought this truck when it was just a 5 year-old 'OK Used' truck. I was 23. That was a while ago. I'm an old dog. I don't want a smart phone either.
My flip phone is damn near indestructable. I laugh at these kids always cracking the screen of their expensive little gadgets, and spending what we would've considered rent money on monthly service charges.
As far as providing free entertainment -- I work in the entertainment industry -- nuthin' is free. On my off time I don't want to run camera.
Simple, clear and logical instructions -- straight from the hip -- that's all ya get. If I don't know what I'm talking about, I don't post.
[Unless I do. Then I delete after sobering up ;)]