1972 Blazer ls swap
2 Attachment(s)
Here is a blazer i bought from Arizona! Pretty much rust free but the engine blew up and the previous owner removed it and sold me the blazer! This is the second one i have buildt and looking forward to this one! Going to do a frame off and install a 6.0 HO and a 4L60E trans. Here is the start!!!!
|
Re: 1972 Blazer ls swap
I will be the first to follow!
|
Re: 1972 Blazer ls swap
Good luck, did you sell your orange one?
|
Re: 1972 Blazer ls swap
4 Attachment(s)
Yesd! Dave Hall with Restore a Muscle car in Lincoln Neb. Bought it and changed a few things and finished the interior! Adding pic's. Also starting the tear down on the blue one.
|
Re: 1972 Blazer ls swap
3 Attachment(s)
This is the start of the blue one.
|
Re: 1972 Blazer ls swap
Quote:
is the blue one going to be for sale? |
Re: 1972 Blazer ls swap
The interior came from TMI Products! This one will have a 6.0 HO w/ 4l60E and going to powder coat most everything with TMI interior and vintage air and 2-tone red and grey or Black and silver!! Yes i will probaly sell when finished not sure!!! They are getting harder to find!!!!
|
Re: 1972 Blazer ls swap
I need to ship mine down to your body guy to give mine a fresh coat!!!
|
Re: 1972 Blazer ls swap
I just bought a 72 Jimmy on Nov 1st, so I am just beginning my journey with this style truck, but holy cow that orange one is awesome. That is a beautiful blazer. Looking forward to see this new one you have turns out.
|
Re: 1972 Blazer ls swap
I know this is not a for sale posting! but I do have some of the parts I am not going to be using when I put back together if anyone is interested? Let me know but I will be posting more pictures of the build in the next 2-3 weeks. Spare tire holder, original speaker and mount, cross member, all heating and cooling, console.
Thanks |
Re: 1972 Blazer ls swap
2 Attachment(s)
I have had several blazers but have never notice these brackets? does anyone know what they are for?
|
Re: 1972 Blazer ls swap
?????
|
Re: 1972 Blazer ls swap
If I had to guess I would say air bag bracket.
|
Re: 1972 Blazer ls swap
Quote:
http://www.sdtrucksprings.com/images...te-air-bag.gif |
Re: 1972 Blazer ls swap
Makes Sense! I just had them on the front is what was confusing me.
Thanks |
Re: 1972 Blazer ls swap
3 Attachment(s)
Someone could not get back bumper off so they cut the frame horns off(never understand)! So I found another blazer and got the horns off it and got them installed today!! Starting to make progress! Body comes off next .
|
Re: 1972 Blazer ls swap
1 Attachment(s)
one more.
|
Re: 1972 Blazer ls swap
Not much happening right now but going to remove body next week and start on frame and let body guy get started on painting after i have the body media blasted! Will update next week!
|
Re: 1972 Blazer ls swap
Thanks for updates. Any insight on media blasting? I am torn between all the methods or trying a DIY solution like wet sanding or soda.
|
Re: 1972 Blazer ls swap
if i had time i would do it myself but local guy is not that expensive to media blast!
|
Re: 1972 Blazer ls swap
2 Attachment(s)
Blazer is completely taken apart and ready to go to blasting but the temp here is cold for Arkansas(18-25) so it will go later this week but i did get the Dirty Dingo cross member and I had the transfer case gone thru and painted and Advanced adapter showed up today as well !!! hopefully pick up 6.0 and 4l60 this week to do mock up and the off to blast and body shop!!!
|
Re: 1972 Blazer ls swap
1 Attachment(s)
have u seen the pacific fab. cross member for the LS swap just wondering what you thought of that if u have seen it. Attachment 1736748
|
Re: 1972 Blazer ls swap
i used it on my other blazer and liked it but went with Dirty dingo this time.
|
Re: 1972 Blazer ls swap
so it is truly a bolt in piece, my blazer is a dd so I need to make sure this is a efficient swap, also did you get any special wiring set up to connect the two?
|
Re: 1972 Blazer ls swap
Yes it is a bolt in piece but not sure what you mean about wiring?
|
Re: 1972 Blazer ls swap
are you talking about motor and trans? There is a guy here that takes the factory harness and reworks it and also reprograms the computer and all i have to do is connect 3 wires and it runs.
|
Re: 1972 Blazer ls swap
Subscribed
|
Re: 1972 Blazer ls swap
yes that is exactly what I wanted to know, I can do three wires. I am looking to do 6.2 4l80e and 205, we will see what the yard bares
|
Re: 1972 Blazer ls swap
2 Attachment(s)
Finally got body off frame and building cart for body(Will post pic's later this week) So now its time to start on drive train! This is before pic.
|
Re: 1972 Blazer ls swap
3 Attachment(s)
Picked up 6.0 and trans today!! got the frame stripped and ready to go to blaster and powder coating along with alot of parts. Ready to get started but going to take my time on this one!!! :lol::lol:
|
Re: 1972 Blazer ls swap
1 Attachment(s)
Got cart made and blazer is heading to blaster and body shop!!!
|
Re: 1972 Blazer ls swap
Also noticed Hemi43 talking about suspension and i am wanting to do a 2" lift and was wondering which would be the best?
|
Re: 1972 Blazer ls swap
1 Attachment(s)
Have frame and parts at blaster/powder coating. Hopefully get back next week and start the process of putting back together!!!
|
Re: 1972 Blazer ls swap
Quote:
|
Re: 1972 Blazer ls swap
I used BP Automotive for my first one, and doing a 64 C-10 and used him again. Completely awesome both times.
|
Re: 1972 Blazer ls swap
Adkins 4x4 Watts OK 1-918-422-9948 Mark.
|
Re: 1972 Blazer ls swap
Thanks. In your last blazer did you put the Pacific Fab crossmember in the factory location?
|
Re: 1972 Blazer ls swap
it was close but i think it moved back slightly!
|
Re: 1972 Blazer ls swap
Solid start, coming along.
|
Re: 1972 Blazer ls swap
1 Attachment(s)
Here is a 1972 Jimmy I bought to get the single wall top!!! Going to sell the rest and it is rusty!!!
|
All times are GMT -4. The time now is 09:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com