![]() |
WTB Leveling mats in real good shape
As the thread title says I need some leveling mats.
Also looking for the chrome rear CST panel strips that go on the top of the rear panels Parchment 1972 CST door panels with the stainless trim Tailgate to side bed strips and rubber seals Thanks Mark |
Re: WTB Leveling mats in real good shape
I have a leftover set of leveling mats from my 1971 Jimmy project. They have repaired cracks but are otherwise sound. I will pull them out of storage today, get them cleaned up and will send you some pictures. I have other leftover parts from that project also if you need anything that you didn't mention. Please PM me your email or phone #.
|
Re: WTB Leveling mats in real good shape
Quote:
|
Re: WTB Leveling mats in real good shape
1 Attachment(s)
Do you need mats still Mark? I have a few sets. all of them have splits and cracks but are still nice and useable. $200 shipped you pay pp fees
|
Re: WTB Leveling mats in real good shape
Yes, could you post a picture of the nicest set laid out showing cracks? Can't really tell from the pictures.
|
Re: WTB Leveling mats in real good shape
Quote:
|
Re: WTB Leveling mats in real good shape
Quote:
Thanks |
Re: WTB Leveling mats in real good shape
3 Attachment(s)
Mark, I must have sold the good ones. I could only come up with 3 sets and I'm keeping the best for my k5 and the other 2 are not what you want.one set was cut out on the corners do to a role bar and the other set is dried out both have splits and tears. But these are hard to find in good condition.
|
Re: WTB Leveling mats in real good shape
Sent a couple PMs still interested.
Quote:
|
Re: WTB Leveling mats in real good shape
Still looking.
|
Re: WTB Leveling mats in real good shape
@tristan
I am still looking for these, please. Quote:
|
Re: WTB Leveling mats in real good shape
Still looking for leveling mats.
|
Re: WTB Leveling mats in real good shape
Still looking for leveling mats
|
Re: WTB Leveling mats in real good shape
Surprised these aren’t reproduced yet
|
Re: WTB Leveling mats in real good shape
I agree. I have two really good sets but I will never sell them because they are so hard to find.l in good shape.
Quote:
|
Re: WTB Leveling mats in real good shape
These are probably not repops for two reason.
The lower volume of the Blazers/Jimmys. Plus even though they are rubber and not steel part, the two parts are large rubber parts and also complex because of the peaks and valleys. This means higher tooling costs. With the low volumes and higher tooling costs there is not return on investment to justify making new tooling. Terry |
Re: WTB Leveling mats in real good shape
We bought a bed rug mat for newer truck. They have the valleys for a pickup underneath. Wonder if it would match up to a blazer. Just a thought. If would have to be cut to fit and ruin it for use in anything else. But maybe look and measure the underside first. Or maybe find a friend that has one and look at underside of it and see if it will work first.?? Just a thought. I know beds are different now but maybe.??
|
Re: WTB Leveling mats in real good shape
Quote:
|
Re: WTB Leveling mats in real good shape
Dont know how to send a link but look up bedbugs on Google look at the underside of the mat. Dont know if you can just buy underside of one. When my son gets home I can take a picture of underside of his.
|
Re: WTB Leveling mats in real good shape
painerljp,
Looked at the bedbugs site. Looks like a very viable alternative to the unobtanium oem rubber leveling mats. Great find!!! Thanks for sharing with the forum. They don't have size to fit out 67-72 blazers/jimmys. so it looks like you buy a larger mat size and cut to our bed size. Terry |
Re: WTB Leveling mats in real good shape
Check it out a little better you can call them during week. They have great customer service. May send you a sample?
|
Re: WTB Leveling mats in real good shape
1 Attachment(s)
This one is for van floor couldnt get the image of a truck one to load.. I imagine you could get one close to ribs needed you could somehow grind down areas to match your particular rib pattern on bottom side. Good luck in hunting. Let know what you all find out.
|
Re: WTB Leveling mats in real good shape
https://bedrug.com/universal-truck-b.../chevrolet/c10
Im assuming this would be the option? Closest to the years of these and universal cut to length? |
Re: WTB Leveling mats in real good shape
The universal ones are NOT ribbed on bottom I dont think
I sent to the factory for samples. Will post pics once I receive them. Call the factory who makes them. |
Re: WTB Leveling mats in real good shape
Quote:
|
Re: WTB Leveling mats in real good shape
HiThey are sending 4 samples. One of each product so we can figure this out.
|
Re: WTB Leveling mats in real good shape
Excited to see the samples, thanks for doing that!
|
Re: WTB Leveling mats in real good shape
Quote:
|
Re: WTB Leveling mats in real good shape
Subscribe
|
Re: WTB Leveling mats in real good shape
Nice
|
Re: WTB Leveling mats in real good shape
Along for the ride
|
Re: WTB Leveling mats in real good shape
Still have not received any yet. Will do a follow up call tomorrow sometime. Have gotten 4 emails saying they are shipping them so we will see if they ever send them. But mail now is taking forever anyways. Havent forgotten.
|
Re: WTB Leveling mats in real good shape
Awesome !
|
Re: WTB Leveling mats in real good shape
👀 I cannot wait to hear some results!
|
Re: WTB Leveling mats in real good shape
They are supposed to send me samples. They finally called me back today. The samples are gonna be awhile due to skeleton crews working. . But in meantime I need some pretty specific measurements as I do not have a blazer. Wide and length of original mats and the measurements of the rib pattern on the underside like they are 2inches apart each one or whatever the measurements wind up to be. 1 7/8? . Are the ribs all same size and the overall thickness the mats is supposed to be. So width x height x length. Widest point. Shouldnt be to difficult. Cause guy told me they make them for toyotas dodge ford Van's, etc. So if we find one with the right spacing we could cut them down to fit. But finding the correct rib pattern will be trial and error. Once we have measurements of rib pattern should be able to match up somewhat closely. If all this makes sense to you all. So we all need to look at all our friends and family's truck to see what bed floor pattern matches the best. Or hell just go shopping at local car dealer with a tape measure. Let me know dimensions when you get a chance.
|
Re: WTB Leveling mats in real good shape
3 Attachment(s)
Here you go. 2 required per floor
. |
Re: WTB Leveling mats in real good shape
No samples as of yet. Called them numerous times. We need to find the closest match to ribs in blazer. Newer model trucks. Toyota, Nissan, chevy, ford, etc. To those dimensions. Havent given up but covid is putting a halt to finding out anything as of right now. Still working on it.
|
Re: WTB Leveling mats in real good shape
Quote:
|
All times are GMT -4. The time now is 08:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com