![]() |
$1.00 60-63 C10 Cab Cuts
4 Attachment(s)
Just got this cab. Not sure if any of you guys may need some cab cuts. Everything is available except for the BBW.
$1.00 plus the cost of shipping to you. |
Re: $1.00 60-63 C10 Cab Cuts
Whats radio area look like?
|
Re: $1.00 60-63 C10 Cab Cuts
lower A pillar area, inside the cab about level with the dashboard
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
5 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Hi 67 I'll take the transmission firewall section and the radio delete plate. Thanks.
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Speaker bracket happen to be still there? Defrost vents?
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Looks something like this to the right.
|
Re: $1.00 60-63 C10 Cab Cuts
Any rust through on the upper corners of the windshield area? I need both sides inside and out. Also, if it has the passenger side sun visor bracket, I could use that area as well
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
I would take a 3 of pieces of the stamped back of the cab highlighted, say about 1 inch on each side of the bends and about 6 inches up, so they can fit in a priority box like Small Box 8 11/16" x 5 7/16" x 1 3/4" $7.65
or Medium Boxes 11 1/4" x 8 3/4" x 6" or 14" x 12" x 3 1/2" $13.20 , thanks Joe |
Re: $1.00 60-63 C10 Cab Cuts
4 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
My zip is 30188 Thanks! *Edit* I will go check on my cab in a couple minutes to see if I need the inside part or not. |
Re: $1.00 60-63 C10 Cab Cuts
I'll start working on the cab cuts tomorrow.
|
Re: $1.00 60-63 C10 Cab Cuts
I checked my cab on the inside. It looks ok. It's the outside part that I know has some big holes in it
|
Re: $1.00 60-63 C10 Cab Cuts
How much of the back window are you keeping? The whole panel, or are cuts along the bottom of the cab at the pinch weld available?
I need about two inches high, along the driver's side. It's been a while since I've seen the cab--if you're good with cutting that area, I'll go find out what I need exactly. -Brad |
Re: $1.00 60-63 C10 Cab Cuts
I’d like to have one side of the dash, for the “hump” portion on top.
|
Re: $1.00 60-63 C10 Cab Cuts
Either side of the dash will be fine for my purposes, whichever is the straightest.
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Can i get this section cut out please? let me know how much to 94513. Thanks
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
2 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
3 Attachment(s)
Quote:
Pictures |
Re: $1.00 60-63 C10 Cab Cuts
Quote:
Let me know how much and how you want paid. |
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Hi,
I would like to following section on the driver's side corner around the gas tank filler shipped to 30032. Please let me know how you would like payment. https://lh3.googleusercontent.com/9R...-no?authuser=0 Thank you! |
Re: $1.00 60-63 C10 Cab Cuts
Got my pieces yesterday. Just what I needed, thanks!
|
1 Attachment(s)
Was wondering first if you could provide a cut from the passenger side corner and if so, how much for the part + shipping? The attached pic will give you the details but if you need anymore info please let me know.
Posted via Mobile Device |
2 Attachment(s)
Was wondering first if you could provide a cut from the passenger side corner and if so, how much for the part + shipping? The attached pic will give you the details but if you need anymore info please let me know.
Posted via Mobile Device |
Re: $1.00 60-63 C10 Cab Cuts
If it's still there, I'd like to get the area along the bottom edge of the back of the cab, the pinch weld that goes from the cab corner, up over the frame, from the driver side to the passenger side.
|
All times are GMT -4. The time now is 08:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com