Blazer and Jimmy Fuel Neck Styles
4 Attachment(s)
Surprisingly there are different styles. I thought I’d illustrate the differences with photos drawn from here on the forum. Feel free to clarify if anything is incorrect or add more to expound.
Here are examples of the 69-70 style...two-piece |
Re: Blazer and Jimmy Fuel Neck Styles
2 Attachment(s)
1971 - also a two-piece...I believe the upper part that attaches to the bedside is the same used on 71-72 pickup RPO NL2 aux fuel tanks.
|
Re: Blazer and Jimmy Fuel Neck Styles
4 Attachment(s)
1972 one-piece style...note use of a tie strap securing the vapor hose to the metal pipe above the floor pan
|
Re: Blazer and Jimmy Fuel Neck Styles
2 Attachment(s)
I suspect all years made use of this bracket to support the fuel line and accompanying vapor line below the floor pan.
Non-CST K5s used the metal cover over the fuel neck. CSTs had the rear panels that served to cover the neck. |
Re: Blazer and Jimmy Fuel Neck Styles
1 Attachment(s)
Options for replacement fuel hoses...
Gates 24702 w 1.375” ID https://www.jegs.com/i/Gates/465/24702/10002/-1 GM if it can be found. |
Re: Blazer and Jimmy Fuel Neck Styles
Great post!
|
Re: Blazer and Jimmy Fuel Neck Styles
Quote:
|
Re: Blazer and Jimmy Fuel Neck Styles
All I can say is subscribed. It's too late for my brain to process all that.
|
Re: Blazer and Jimmy Fuel Neck Styles
Never realized that there were so many differences.
Where is the best place to find info on the pipe that goes next to the filler neck with the 3 small hose connections at the bottom? |
Re: Blazer and Jimmy Fuel Neck Styles
5 Attachment(s)
Factory assembly manual is a good start plus photos from prior builds and part outs. I think there is some variation in tank plumbing for 72 compared with other years. Here’s an example diagram from said manual - I’ll post a pic from my 72 build.
|
Re: Blazer and Jimmy Fuel Neck Styles
2 Attachment(s)
Here’s an example of the most recent aftermarket iteration of the K5 fuel tank with the correctly configured neck.
(All borrowed pics, thanks for posting) |
Re: Blazer and Jimmy Fuel Neck Styles
Thanks Deadhead, I appreciate it.
I dont have the evap canister so I am looking at options for simplifying all of the pipes, hoses and connections. The evap system seems a little excessive for such a primitive vehicle. |
Re: Blazer and Jimmy Fuel Neck Styles
You bet. Good luck with your build.
|
Re: Blazer and Jimmy Fuel Neck Styles
Keeps getting better and better!!! Now, if you could do this with the whole blazer you would have something.
|
Re: Blazer and Jimmy Fuel Neck Styles
I believe the fuel filler neck and gas tank were the last pieces i took off during dissasembly. By that point i was so irritated with rusted out screws and bolts that i dont think i took the time to properly survey the peices i was removing.
Thanks for another great writeup on the year differences. |
Re: Blazer and Jimmy Fuel Neck Styles
Apparently the 72 fuel neck is available aftermarket now as well (not mine)
https://www.ebay.com/itm/1969-1970-1...cAAOSwuSxfMwAk . |
Re: Blazer and Jimmy Fuel Neck Styles
Wow. Thanks for posting.
|
Re: Blazer and Jimmy Fuel Neck Styles
1 Attachment(s)
Really useful photo taken by member PDXk5 that illustrates where the hose clamp goes on the splash shield and tie fastener location.
|
Re: Blazer and Jimmy Fuel Neck Styles
Great post......getting ready to put my Blazer in the shop for a complete maker over.........recently bought the new tank shown above so just bought the filler neck off ebay in link above from the TruckStop....
Thanks for the info fellas! |
Re: Blazer and Jimmy Fuel Neck Styles
1 Attachment(s)
Quote:
|
Re: Blazer and Jimmy Fuel Neck Styles
Quote:
Look at that red primer. Where was that truck assembled? |
Re: Blazer and Jimmy Fuel Neck Styles
Quote:
|
Re: Blazer and Jimmy Fuel Neck Styles
2 Attachment(s)
Quote:
|
Re: Blazer and Jimmy Fuel Neck Styles
Quote:
Jeff - thanks for the photos |
Re: Blazer and Jimmy Fuel Neck Styles
Quote:
So, you guys piqued my interest and I did the string wrap method to trace the OEM tie to determine the length. I didn’t want to ‘unzip’ it to avoid it breaking from fatigue or what not. Anyway, I measured the tie from the tip of the ‘loose’ end to the tip of the closed loop end and got 11 inches. Hope that is of use to you guys. Is there a source for correct style OEM ties offered in different lengths? I’m planning on replacing my original fuel tank with one of the correct repro styles from above, as well as new fuel lines. Was thinking I would/could fish the old lines out and the new lines into the metal strap and plastic tie but if the plastic tie breaks it would be good to know where I could get a correct style replacement. I’m going to be installing a fuel skid plate I recently had powder coated under the tank after the fuel tank is installed. I’ll start a new thread for that endeavor but could use some pointers on that as I tackle that later this winter. |
Re: Blazer and Jimmy Fuel Neck Styles
1 Attachment(s)
I thought I had some NOS straps around here, but didn't lay my hands on them in my short search today.
I think that strap may still be available from GM. I will look in my Chevelle assembly manual and see if I can come up with a number. BTW, it always bothered me that there is so much extra strap that I had to creatively use up. |
Re: Blazer and Jimmy Fuel Neck Styles
Jeff completely agree with you and thanks for the good words.
The plastic ties seem resilient to me and the nubs that keep them locked in place are shallow. I don’t expect you will damage it upon removal if you are cautious. Also, I can only find 5” and 7” aftermarket ties. I buddied up two ties and placed them around the hoses for now. Larry thanks. If that Chevelle tie works I’d love to have a lead for a source or even a part number to chase. |
Re: Blazer and Jimmy Fuel Neck Styles
These people say they have the straps.11 3/8" long.
https://www.gmpartsprime.com/genuine...0-3917385.html |
Re: Blazer and Jimmy Fuel Neck Styles
Thanks Larry I just ordered a package of 10.
|
Re: Blazer and Jimmy Fuel Neck Styles
2 Attachment(s)
Arrived. Style differs from oem. These are just typical zip ties. :(
|
Re: Blazer and Jimmy Fuel Neck Styles
AC/Delco zip ties!
I don't want to ask how much those were! Please call when you get a chance Pete. |
Re: Blazer and Jimmy Fuel Neck Styles
How is that for bait and switch?
I guess I better start digging through my archives. |
Re: Blazer and Jimmy Fuel Neck Styles
1 Attachment(s)
Received some Gates fuel hose today (USA made) because I’m a hoarder. I can confirm a good fit. No local parts shop could obtain this Gates hose - Jegs had it but I wonder for how much longer...pricey.
|
Re: Blazer and Jimmy Fuel Neck Styles
Quote:
|
Re: Blazer and Jimmy Fuel Neck Styles
Quote:
|
Re: Blazer and Jimmy Fuel Neck Styles
Quote:
I'm trying to find the hose with the bend. I see photos of both straight and with the bend fir the same part. Amazon has a photo with bend but several complaints the hose received had no bend. |
Re: Blazer and Jimmy Fuel Neck Styles
It’s straight hose, no bend. A 3’ section.
|
Re: Blazer and Jimmy Fuel Neck Styles
FWIW I’m u aware the any OEM fuel neck hoses were molded w a bend. Would like to know if so.
|
Re: Blazer and Jimmy Fuel Neck Styles
My initial search showed the 24702 with a bend so I thought that was the right hose. A previous owner (15+ years ago) installed a newer style poly tank but the hose used to connect the fuel neck to the tank was straight but is bent and has a slight kink in it. The tank isn't period correct but it hasn't caused me any problems, other than the hose kink. Maybe the straight 24702 might be a better option than the kinked hose I have now.
|
Re: Blazer and Jimmy Fuel Neck Styles
Out of the 3 I have had all had straight hose that you bent a little?
If you need a 1 3/8 90 degree fuel hose this place has a nice fuel related parts assortment. https://www.fillernecksupply.com/1-3...elbow-29-long/ And the home page. https://www.fillernecksupply.com/ |
All times are GMT -4. The time now is 11:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com