Need help with value
Hello a friend is finally considering selling me his Jimmy that's sitting in a field. Been sitting the last 10 years but I dont know what to offer him or what values are right now. Just looking for ideas of what its worth before I give him an offer.
Not too much rust at all, just some smaller spots. Interior is rough and sitting in the sun didn't help. He doesn't know too much about other than a mild built 350 https://gyazo.com/fb981fb20587305c6e801c6b0f8dbf8b https://gyazo.com/bcbccbdd16e8e6afc2023d5675b379a1 https://gyazo.com/103baca553b3b41ce7ecbfc793f14285 https://gyazo.com/578d2629fa92809dcab99bb2748f9670 |
Re: Need help with value
Fairly complete truck, maybe start at $1200.
|
Re: Need help with value
Quote:
|
Re: Need help with value
From your description and what I can see in the photos (single wall top, correct seats, uncut dash, relatively clean) I'd say the seller would have buyers all day long at $8k in the present market as it sits. Anything less and you did great imo.
Here's a 69 Blazer on eBay now that can sort of serve as a comp (has AC, CST) - no mention whether or not a top is included: https://www.ebay.com/itm/1969-Chevro...IAAOSwuChgDgSd |
Re: Need help with value
I would take a closer look underneath and into the rocker boxes first. Even with the boxes in good shape and you want to completely restore, you're looking at least 15k plus going through the whole thing from to back. 1500-2k would be a decent deal in my opinion.
|
Re: Need help with value
The very most I would pay for that one is $4500. It has all the typical rust issues, but the front seats and top are a bonus. Too bad it isn't a Blazer, LOL.
|
Re: Need help with value
1500 is laughable. It’s 6 or 7k
Posted via Mobile Device |
Re: Need help with value
Thanks for all the comments and help. He said he'd come up with a price in the next couple days so we'll see if I get a Jimmy by the weekend.
|
Re: Need help with value
It’s complete and a pretty color combo u do not see often being here in Boston I could get 8 to 10 k
|
Values seem to be tied to geography. The Jimmy in the condition shown and described wouldn’t be worth more than $2,000 to $3,000 tops in the Pacific Northwest. I bought my 1971 rust free Jimmy with 114,700 original miles, recently rebuilt original 350 and rebuilt THM 350 tranny, new front seat covers, decent paint (Hugger Orange) double wall top and unmolested wiring for $11,500 in December 2017. I’ve put a couple thousand $$ in it (rear springs, shocks all around, carpet kit, sound deadening mat) and a ton of hours detailing and tweaking it from top to bottom. I think it would bring around $20,000 - $22,000 today.
A previous poster said too bad it’s not a Blazer. I prefer GMC over Chevy just for the fact there are fewer seen. I also like the grille design better. Personal taste and preferences I guess. Posted via Mobile Device |
Re: Need help with value
If I ventured into another K5 project I'd prefer it to be a GMC
|
Re: Need help with value
That truck has a lot of pluses. Like others have said, the top, the original seats, push bar and even those turbine wheels. In today’s market those parts alone may be worth $2500-$3500. In the northeast where I live that truck would sell for $6500-$7500 all day. To some it may be another plus that it’s a jimmy. I don’t have a jimmy yet. :cool:
|
Re: Need help with value
Here’s another comp for perspective. Rust bucket with utility buckets, broken hatch, and a double wall top now at $7600 yet reserve not met: https://www.ebay.com/itm/1971-Chevro...gAAOSwH1xgDFmJ
|
Re: Need help with value
That’s the worst windshield frame I’ve ever seen not that iam picking it apart
|
Re: Need help with value
Quote:
|
Re: Need help with value
I’m on a Facebook group 69-72 blazers and people are asking crazy prices. A rolling chassis with just the blazer tub for $3500 +. I know value has gone up, but it’s out of control and people are paying it. From what I’ve seen on that page a Jimmy/blazer like the one you posted would sale for 8-10k plus.
|
Re: Need help with value
https://www.hemmings.com/classifieds...r/2462656.html
Not all are priced out of sight. Here’s a nice 72 Blazer for $20,000 OBO in Wyoming. Seems prices are much higher East over West but maybe that’s just my impression. Posted via Mobile Device |
Re: Need help with value
The body on the 71 sure looks like a hot mess as if they painted over dents and rust. The VIN plate was attached with incorrect rivets. Buyer beware.
|
Quote:
Posted via Mobile Device |
Re: Need help with value
Quote:
|
Re: Need help with value
Quote:
|
Re: Need help with value
2 Attachment(s)
The word is definitely out....current Hagerty magazine, “No other Bull Market vehicle has performed better than the Blazer.”
|
Re: Need help with value
That eBay white ‘69 is at $17,000 with 2 hrs left. Jeez.
Quote:
|
Re: Need help with value
Take a look at the Blazer and the Jimmy now on Bring a Trailer. The Blazer is at $110k w days yet to go.
|
Quote:
Posted via Mobile Device |
Re: Need help with value
If you get the time, look through the past Blazer auctions on Bring A Trailer just to see what’s sold. Survivor white Highlander brought $58k recently. I don’t perceive much of a premium for a given year but by numbers they’ll always be more available 72s.
What I find most surprising is that bidders seldom if ever ask questions that touch on originality or completeness. |
Re: Need help with value
Let us know what you get it for. Like SeventyOne said, if you get it for 1200, you stole it. From what I can tell, it looks like a great project, body looks good with all the emblems and lenses, seats, roll bar. It even has the new in dash Nav system, AC in the seats and cupholders...
Sorry, that's my new Tahoe LTZ. Could bring 5K, depending on how good of a friend he is! |
Re: Need help with value
Quote:
|
Re: Need help with value
Quote:
|
Re: Need help with value
Quote:
|
Re: Need help with value
Thanks for the follow up. Keep hope alive.
|
Re: Need help with value
I wanted say I think the values are going up because new vehicles are so freaking expensive. My uncle just bought a 21 ram 2500 all decked out and it was almost 90k. I like new but yikes.
|
Re: Need help with value
Quote:
|
Quote:
Posted via Mobile Device |
Re: Need help with value
Update on the Jimmy. He called today said he needed the money more so we took the trailer and picked it up finally. Got a bunch of extra stuff with it ill sort out and take some more pictures. Thanks for the help.
|
Re: Need help with value
gyazo.com/24a2d64164e1169f879cdb9e782ef9e4
|
Re: Need help with value
Congrats. Glad that worked out. I wasn’t able to launch that link.
|
Re: Need help with value
|
Re: Need help with value
Here's more pictures. Needs some rust addressed but nothing too major. Going to clean it up a little and try and get it running soon.
https://i.gyazo.com/43c9206f2a585015...dcacf988ea.png https://i.gyazo.com/1f28e36d728397c3...a6432a9e21.png https://i.gyazo.com/32073a9a4e4e41c3...f100f1e3d7.jpg https://i.gyazo.com/8ce6490740dcefd5...2de45a36a3.jpg https://i.gyazo.com/22ae1cd3f296796e...04c17e11d5.jpg |
Re: Need help with value
I'm glad to see that the first thing you did was drain the old fluid from the Fireball bottle on the floorboard!! I would say flush that out a few more times with new fluid and you'll be good to go. Keep sending pics!
|
All times are GMT -4. The time now is 08:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com