The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 07+ Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=201)
-   -   Grease points (https://67-72chevytrucks.com/vboard/showthread.php?t=621734)

463 03-21-2014 03:33 PM

Grease points
 
I have a question. On my sons 2011 Silverado crew 4X4 1/2 ton (top end 1/2 ton) I can't locate any zerk fittings.
Did chev put any on the truck?
The 2005 ext short box has zerks
Thanks

northerngmc 03-24-2014 11:28 AM

Re: Grease points
 
I was just under my 2012 Yukon yesterday and I could only find two, one on each outer tie rod end.

Yukon is 4WD.

463 03-24-2014 12:29 PM

Re: Grease points
 
Thank Blain: Will check the tie rods but I was sure there was not a zerk on those ones.

northerngmc 03-26-2014 11:57 AM

Re: Grease points
 
Any chance you have checked? I am curious as I like to smear grease on everything and find it strange to not have zerks everywhere.

I did a google search and one thread suggested there may be a zerk on the slip section of the driveshaft. I haven't checked mine yet.


All times are GMT -4. The time now is 11:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com