Gearbox spanner wrench
I know most people make something to use but does anyone know what size spanner wrench is needed to tighten up the front part of the gear box any help is appreciated thanks
|
Re: Gearbox spanner wrench
If you posted a pic of what you’re trying to tighten up I’m sure someone could suggest what wrench to use.
|
Re: Gearbox spanner wrench
1 Attachment(s)
Quote:
|
Re: Gearbox spanner wrench
The 2 holes in the front take a spanner wrench, but what size
|
Re: Gearbox spanner wrench
Quote:
Good thing you posted a picture. I was trying to figure out where a nut would be on the front of a transmission...:) If I was going to buy a spanner wrench I would get an adjustable one. I have quite a few steering boxes out, but I can't get out to measure one at this time. https://www.amazon.com/Universal-Fin...04059106&psc=1 They have 3mm & 4mm pin ones. Whatever that is. LockDoc |
Re: Gearbox spanner wrench
I plan on buying a adjustable one just dont know what size pins it requires was hoping someone has one laying around and could slide a drill bit in the holes in tell me what diameter I need
|
Re: Gearbox spanner wrench
Quote:
https://www.amazon.com/OTC-1266-Adju.../dp/B000X8EGZE j |
Re: Gearbox spanner wrench
Brass drift and a hammer, I’ve had plenty apart for rebuilding and never needed the spanner.
|
Re: Gearbox spanner wrench
I'm aware there millions of ways to tighten and loosen it just figured someone has had to use the correct tool, I'm just going to use 3 bolts and 2 pieces of steel swiveled with one bolt
|
Re: Gearbox spanner wrench
Regardless of what to you use to get the front nut loose, make sure you take the jamb nut loose first. That inner nut that takes the spanner won’t budge if the outer jamb is tight.
|
Re: Gearbox spanner wrench
Quote:
https://5speeds.com/cart/index.php?r...&product_id=70 |
All times are GMT -4. The time now is 06:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com