67-72 Burb Rear Clip Cuts
All Gone. Thanks guys
|
Re: 67-72 Burb Rear Clip Cuts
Hello,
Interested in the fuel filler "tunnel" if the floor flange is ok. Would like some pics if you can, and shipped to 37303. Thanks |
Quote:
Posted via Mobile Device |
Re: 67-72 Burb Rear Clip Cuts
That's ok, no hurry. I'm working all weekend so I can have more money than time, ha.
|
Re: 67-72 Burb Rear Clip Cuts
Hey Ryan, I'm looking for a decent fuel/vapor separator. I see one in your pictures. The tube ends at the bottom rusted out on mine. I'm interested in this if it's in decent shape. It's the cylinder in the left rear of the burb behind the fuel filler tunnel. It has 3 tubes that go under the vehicle and is really easy to remove. Let me know if it's available and how much.
Thanks |
Re: 67-72 Burb Rear Clip Cuts
Rear sill?
|
Re: 67-72 Burb Rear Clip Cuts
Quote:
https://i.imgur.com/ULkXe0l.jpg?1 https://i.imgur.com/F7afHZq.jpg?1 |
Re: 67-72 Burb Rear Clip Cuts
Quote:
Thanks, Ryan |
Re: 67-72 Burb Rear Clip Cuts
Quote:
-Ryan |
Re: 67-72 Burb Rear Clip Cuts
That's much better than what I got. Let me know on shipping and we can go from there. Thanks
|
Re: 67-72 Burb Rear Clip Cuts
Quote:
https://i.imgur.com/Gg0I1Z2.jpg?1 https://i.imgur.com/Lr3elql.jpg?1 |
Re: 67-72 Burb Rear Clip Cuts
I could really use the rear tail pan if it’s available still
|
Re: 67-72 Burb Rear Clip Cuts
How is the chrome rear sill plate? IF decent I will take it pending shipping costs to 21801
|
Re: 67-72 Burb Rear Clip Cuts
Still interested in chrome rear sill plate if available
thanks |
Re: 67-72 Burb Rear Clip Cuts
I will check today or tomorrow. I got caught up running power to my shop. Going to start pulling parts soon.
|
Re: 67-72 Burb Rear Clip Cuts
Quote:
https://i.imgur.com/xKzXJ63.jpg?1 |
Re: 67-72 Burb Rear Clip Cuts
Quote:
https://i.imgur.com/Gm3mvmY.jpg?1 |
Re: 67-72 Burb Rear Clip Cuts
Quote:
https://i.imgur.com/HCNTN04.jpg?1 https://i.imgur.com/pX98WFD.jpg?1 https://i.imgur.com/27rUUlB.jpg?1 |
Re: 67-72 Burb Rear Clip Cuts
If anyone is interested in the rear sill, I will remove the entire piece by cutting past the seam in the quarters/taillight area. The quarters and taillight area are bent/wrecked/rusted. The rear sill is in good shape except where water pooled in the middle. Has some heavier surface rust and 2 small holes that I see. $50 + the ride.
https://i.imgur.com/xKzXJ63.jpg?1 https://i.imgur.com/b3kK4zh.jpg?1 https://i.imgur.com/uzjqM9J.jpg?1 https://i.imgur.com/EVo5Lyk.jpg?1 |
Re: 67-72 Burb Rear Clip Cuts
Quote:
|
Re: 67-72 Burb Rear Clip Cuts
You don't have to cut the rear sill. If you look from underneath it bolts to the quarter panels with I think 1/2" bolts on each side
|
Re: 67-72 Burb Rear Clip Cuts
I'm interested in the Rear sill, pending pics of underneath it.
and I'd like a pic after chrome strip is removed. Travis |
Re: 67-72 Burb Rear Clip Cuts
Shipping on fuel fill tunnel to 37303
|
Re: 67-72 Burb Rear Clip Cuts
Quote:
|
Re: 67-72 Burb Rear Clip Cuts
The rear sill was very rusty underneath. Also the chrome piece was paper thin and started coming apart when I tried to remove it.
|
All times are GMT -4. The time now is 11:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com