The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   sound deadener (https://67-72chevytrucks.com/vboard/showthread.php?t=427740)

cstm68 10-24-2010 11:41 PM

sound deadener
 
what sound deadener is everyone using?? i was thinking of the summit racing stuff cuz i just can see spending the money on dynomatt for a truck thats not my dd, do u think this stuff will help? http://www.summitracing.com/parts/SUM-879014/

nastyc10 10-25-2010 12:14 AM

Re: sound deadener
 
I used fatmat. bought the 50 sqft. bulk pack. Works good for me. I don't know about the summit stuff.

Maxxd07 10-25-2010 12:53 AM

Re: sound deadener
 
Subscribing...

tonypaul 10-25-2010 12:53 AM

Re: sound deadener
 
3 Attachment(s)
I just put in the "Fatmat" in last night. I did my firewall, floor, back cab wall, cab corners, all inside the doors, and still have enough to do a second layer on my firewall and still have a little left over... I started with 100sqft'
Attachment 647985

Attachment 647986

Attachment 647987
Sorry for the dark pics.....

travlinman 10-25-2010 01:48 AM

Re: sound deadener
 
i used fatmat on my 68 suburban and going to use it on 69 swb

stich626 10-25-2010 06:49 AM

Re: sound deadener
 
whats the fatmat go for..
I've seen alot of cars/trucks use the bed liner in the interior

d.uccello 10-25-2010 07:35 AM

Re: sound deadener
 
Looking at the picture of the summit stuff, it appears to be some type of fiber insulation. That would make it good for a firewall and perhaps for the roof or a backing on door panels but likely not great for floor boards or any other wear or traffic areas... still probably better than the silver bubble wrap stuff ;)

bigsnookmaster 10-25-2010 08:02 AM

Re: sound deadener
 
I used Second Skin Damplifier Pro. Good stuff also.

Shane 10-25-2010 08:51 AM

Re: sound deadener
 
fatmat here as well ....

Roscoep 10-25-2010 09:47 AM

Re: sound deadener
 
Is the original firewall insulation left in place and these materials installed over it, or is it removed?

ChevLoRay 10-25-2010 11:01 AM

Re: sound deadener
 
Reading all I have read says you should have clean sheet metal. If you put it over the old firewall insulation, at some point it's going to fall away from the firewall.

smn69 10-25-2010 11:31 AM

Re: sound deadener
 
Quote:

Originally Posted by stich626 (Post 4258819)
whats the fatmat go for..
I've seen alot of cars/trucks use the bed liner in the interior

I did a search on ebay and found what is supposed to be fatmat with no logo on it for 124.00 (including shipping) for 100 sq ft. from user sounddeadenerdiscounts. I still have 50 sq ft left after doing the inside of the cab. I still have the doors and possibly the underside of the hood to do.

Question: Does it make sense to do the underside of the hood? Any pros or cons to it?

travlinman 10-25-2010 11:45 AM

Re: sound deadener
 
http://fatmat.com/

big_al_71 10-25-2010 11:50 AM

Re: sound deadener
 
1 Attachment(s)
I used something call cool-tec I think it was called just like dynamat but a a cheaper price I found it here locally at a performance shop and it works awesome....

71 super 10-25-2010 12:29 PM

Re: sound deadener
 
I used dyna mat in my bb truck and just cut into small squares and placed it in hollow places- doors, rear of cab, around rear light etc. I just installed fatmat in the same fashion in my 4x4 yesterday and could tell an immediate difference just tapping on the various sheet metal sections. I can only imagine what an entire cab would be like with this stuff. It sounds very solid and not "tinny" with just what I did . Get the fat mat off ebay you can get it cheaper there if you shop.

bigguy69 10-25-2010 05:47 PM

Re: sound deadener
 
good thread

eightbanger 10-25-2010 05:47 PM

Re: sound deadener
 
I reckon if these old trucks had this stuff installed when they were built, with all the rainwater leaks that they developed over the years there wouldn't be a solid cab floor in the country today. I'll stick with the old fashioned underlay, I can remove that stuff and dry the whole thing out if need be before the damage is done....JMO.

oletimer72 10-25-2010 07:02 PM

Re: sound deadener
 
5 Attachment(s)
installed fatmat in mine i order 100sq ft off ebay for 125.00 and still have half a roll left over for doors and hood.

69sixpackbee 10-25-2010 07:09 PM

Re: sound deadener
 
I used from Mc Master-Carr, #9709T39 Sound and Vibration Damping Sheet EVA Mastic, .079" Thick, 32" X 54". Then cover it with #9367K65
Foil-Faced Bubble Wrap Insulation 36" Wide, 25 ft Roll Length.
I used 3m spray adhesive for the insulation sheet.
All of this is a damn site cheaper than the "brand X" stuff.

My $.02

bigguy69 10-25-2010 07:34 PM

Re: sound deadener
 
Quote:

Originally Posted by 69 1/2 Six Pack Bee (Post 4259934)
I used from Mc Master-Carr, #9709T39 Sound and Vibration Damping Sheet EVA Mastic, .079" Thick, 32" X 54". Then cover it with #9367K65
Foil-Faced Bubble Wrap Insulation 36" Wide, 25 ft Roll Length.
I used 3m spray adhesive for the insulation sheet.
All of this is a damn site cheaper than the "brand X" stuff.

My $.02

does it work good? does the heat of the floor cause anty trouble?

69sixpackbee 10-25-2010 07:39 PM

Re: sound deadener
 
No problems whatsoever. I used the mastic inside of the doors and put the insulation under the panels. I also put some under the headliner and any other areas that needed dampening. The "other" brands just are a sound deadener but I needed insulation as well but I guess you could always put the insulation on that stuff as well without complication.

This truck is as quiet as a Lexus :)

Dan in Pasadena 10-25-2010 08:30 PM

Re: sound deadener
 
Quote:

Originally Posted by 69 1/2 Six Pack Bee (Post 4259934)
I used from Mc Master-Carr, #9709T39 Sound and Vibration Damping Sheet EVA Mastic, .079" Thick, 32" X 54". Then cover it with #9367K65
Foil-Faced Bubble Wrap Insulation 36" Wide, 25 ft Roll Length.
I used 3m spray adhesive for the insulation sheet.
All of this is a damn site cheaper than the "brand X" stuff.

My $.02

Did you put the bubble wrap stuff on the floor? Seems you wouldn't for obvious reasons - it would pop(?)

Does the Fatmat stuff only kill sound or does it insulate against heat too? I am wondering if two layers under foot would help for heat in my '46 or if I need to use a different product for that?

Strut 10-25-2010 08:55 PM

Re: sound deadener
 
Has anyone used Lizard Skin Coatings? I had planed to use this not only for sound deadening but to seal up all the seams in the floor.... It can be sanded and painted over too.

http://www.lizardskin.com/pages/sound_control.php

69sixpackbee 10-26-2010 11:54 AM

Re: sound deadener
 
Quote:

Originally Posted by Dan in Pasadena (Post 4260097)
Did you put the bubble wrap stuff on the floor? Seems you wouldn't for obvious reasons - it would pop(?)

Does the Fatmat stuff only kill sound or does it insulate against heat too? I am wondering if two layers under foot would help for heat in my '46 or if I need to use a different product for that?

The bubble wrap IS on all surfaces. It does not pop. It is encapsulated between two layers of reflective mylar and the bubbles themselves are much firmer and smaller than the usual shipping stuff.

nutsforchevys 10-26-2010 06:58 PM

Re: sound deadener
 
3 Attachment(s)
I used window wrap on my dd available at local lumber yards 30.00 per roll. I have used the same roll under 2 floormats and still have a little left.


All times are GMT -4. The time now is 12:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com