1971 GMC Suburban Part out
5 Attachment(s)
71 GMC Suburban Super Custom 1500. Half ton 2wd with 5 lug rear and disc brake front. 3.73 Posi rear. No motor/trans. Has rust issues... very nice tailgate and hatch. Front seats are not original (obviously) has original second row seat. Still in original ochre and white paint... mostly.
Clean title and on non op. Possible trades Front clip-sold Driver and Passenger Front Doors- sold Second row seat- sold Rear bumper. sold Bare dash- sold 3rd door hinges sold Rear Hatch-sold Tailgate- sold |
Re: 1971 GMC Suburban Part out
5 Attachment(s)
more...
|
Re: 1971 GMC Suburban Part out
5 Attachment(s)
and more...
|
Re: 1971 GMC Suburban Part out
1 Attachment(s)
What would you charge me to cut out this piece around the fuel filler? I would like to graph it into my bed side. I would like it to be fairly wide cut and just below the body line so I have a reference point. I would need the filler neck as well. I am in Canada and can have this shipped to my US address in montana but not until this pandemic is over.
|
Re: 1971 GMC Suburban Part out
I am sure this can be done... I have another suburban that has already started to be cut...let me see if that one still has the cut you need... Thank you
|
Re: 1971 GMC Suburban Part out
Ok. If it's a 67 to 70 that would be better as my truck uses a vented gas cap.
|
Re: 1971 GMC Suburban Part out
Hi Adam, very interested, how much for the hatch and gate?
can you text me some close ups on the rusty areas? thanks! |
Re: 1971 GMC Suburban Part out
It is a '70...so, fingers crossed it is good abd there,,,will lyk
Quote:
|
Re: 1971 GMC Suburban Part out
Reached out to you via text..thanks
Quote:
|
Re: 1971 GMC Suburban Part out
Condition and price for headliner bows and rear cargo panels please. Shipped to 89149.
|
Re: 1971 GMC Suburban Part out
Interested in steering column / no steering wheel. How much shipped to 48092. thx, marko
|
Re: 1971 GMC Suburban Part out
Interested in the rear sill. (Panel that the tailgate bolts to.) Also need a piece of rear frame rail if you'll cut up a frame.
|
Re: 1971 GMC Suburban Part out
Adam, getting in line on the hatch and bows, lmk thx
Dave. |
Re: 1971 GMC Suburban Part out
Brake pedal return spring from inside the brake pedal assembly?
|
Re: 1971 GMC Suburban Part out
Parklight bulb sockets?
|
1 Attachment(s)
Are you offering any metal cuts off these burbs? I need the piece above the drivers door between angle of door frame and post. Need to finish up my drivers side crew cab top.
Posted via Mobile Device |
Re: 1971 GMC Suburban Part out
He has this posted multiple places on Facebook
Posted via Mobile Device |
Re: 1971 GMC Suburban Part out
Hi, Any tow hooks??
|
Re: 1971 GMC Suburban Part out
Will pull them out and get you detailed pics
Quote:
|
Re: 1971 GMC Suburban Part out
$90 shipped to you.
Quote:
|
Re: 1971 GMC Suburban Part out
I think I have another one already cut from a different burb, will confirm over the weekend for you! I have a chassis foam a panel, same as suburban, that I can make rear frame cuts from....post a pic and measurements of what you need.
Quote:
|
Re: 1971 GMC Suburban Part out
Your next in line sir...
Quote:
|
Re: 1971 GMC Suburban Part out
Will confirm it is present this weekend for you
Quote:
|
Re: 1971 GMC Suburban Part out
Sorry went with the front clip...
Quote:
|
Re: 1971 GMC Suburban Part out
Probably could help you....I have a panel that might be a better candidate for this cut though. Get me a more precise measurement and location for the cut.
Quote:
|
All times are GMT -4. The time now is 04:27 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com