c20 builds
 

just joined forum picked up 1964 c20 have alot of plans would love suggestions or tips thanks

Re: c20 builds
 

Welcome fellow c20 what are your plans, I kinda turning my in to a low trucker semi style, I am trucker and diesel mechanic, stacks cab lights, and air horns are next
Posted via Mobile Device

Re: c20 builds
 

Would like to know what you have planned and how things go for you. I also have a 64 c20 camper special. Things have been interesting so far but I am getting there.

383 th350 swap from a 292 i6 4 speed. still working out bugs.

Re: c20 builds
 

first gonna put steel wheels on came with truck i think their ford 8 lug 16x7 the rear is a 4.56 so gonna go tall in rear with tires. thinking a static drop of maybe 3 in front and 5 in rear .would also like to upgrade to dual master cylinder it has a booster not sure what parts to get saw some ideas on faq section.this site has a ton of great info.

Re: c20 builds
 

I have a 1964 C20. Stock truck with 283 and 4 speed. I have been playing with ideas so I look forward to seeing what ideas are posted here

Re: c20 builds
 

Welcome from Chuck county. Love the 20 series, keep it 8 lug.

Re: c20 builds
 

How is the truck coming.
Posted via Mobile Device

Re: c20 builds
 

Welcome to the site! I also have a c20 and wish I knew about
this site before I did anything on my rig!!! Lots of ways to go
and lots of help here! I am not sure of the drop of my truck
but I too have a 4.56 rear and the tires I had when I first
dropped it were 235/85/16s and rubbed bad on the rear inner
wheel well! Now I have 235/75/16s but still tach out too much
on the highway! I've got a 292-th400
Posted via Mobile Device

Re: c20 builds
 

started sanding on truck,not real crazy about the yellow.i found on here that 285/75/16 drops down rpms a bit trying to just get some used ones for now with maybe 235/75/16 on front

Re: c20 builds
 

Posted via Mobile DeviceI got 235/75/16 all around, I then thinking of 235/85 in the back or what I can find on c/l I heard the dodge steel wheel fit there 20". Flappers drive my wife crazy, lol I had to counter weight them. It sounded like those wind up teeth that hop around.
Posted via Mobile Device

Re: c20 builds
 

btw, saw 1966 c20 wheels on so. md cl for sale

Re: c20 builds
 

My wheels are off a '96 2500 p/u. It had the 16.5 junk
Posted via Mobile Device

Re: c20 builds
 

I started off with a very rough '64 C-20. After the suspension swap, it's essentially a half ton now.

Re: c20 builds
 

I just saw brothers has a drop spindles disc kits for are trucks, 999$ it comes with front end kits,

Re: c20 builds
 

ece has a c20 to c10 drop spindle kit but requires disc brakes ,i dont know about the rest of you but im on a tight budget .just want truck down a bit she aint no show queen.

Re: c20 builds
 

That brothers kit keeps it eight lug and c20 just something think about if are budgets get bigger some day right, lol. Ricky did get that truck down.
Posted via Mobile Device

Re: c20 builds
 

I cut my front springs and put TJ coils in the rear. lowered rear 5" and the front 3-4. sits nice but the springs are a little soft I will say. cost me 25 bucks and some sawzall blades ( I wasn't about the burn down the apartment complex with a torch) I had overload half leaves I had to remove. The panhard bar is almost horizontal, not sure if that is good but I think it moved the axle slightly to the right.

Re: c20 builds
 

It sounds like did, I was going leave my helps spring on. Like that faded blue. How much did you cut the front. Make a ne panbar or get adjusted one.
Posted via Mobile Device

Re: c20 builds
 

no not yet,friend gave me 3 inch lowering blocks for rear,but after asking on here decided to save for drop springs,because of scrub line. will probably cut 1.5 springs out of front

Re: c20 builds
 

Go on the hunt for a donor 88-91 3/4 ton burb, one could use the whole front crossmember, etc and get disc brakes for low cost.....use the booster and the power steering pump, gearbox, etc......they have 8 hole wheels......check it out........I had a 88 for the engine and other parts for 500.00, then sold it for $300.00

Re: c20 builds
 

planned on doing some work on truck this weekend,been neglecting it . now other truck needs water pump,great make a few extra dollars n spend on pump oh well, got another harley headlamp for truck i think i can squeeze it in

Re: c20 builds
 

Thats how they get you.
Posted via Mobile Device

Re: c20 builds
 

Posted via Mobile Device I got all level now 3-4 drop.
Posted via Mobile Device

Re: c20 builds
 

heres how head lamp looks

Re: c20 builds
 

headlights r a little brighter and i think look good