Bare 4x4 blazer/jimmy frame $250 east tn
 

Nice shape..i am parting the frame out..lift kit is on the 67-72 truck board

th350/205 is there also..

frame will be in great cond..will have spring hangers on it..no springs

frame with crossmembers..I will post pics soon.

$250 local pickup 37745

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

how much for the spring hangers and front shackles

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

I have the rear hangers,for the rear off..
and the front springs and hanrgers off another frame that had damage.

I dont have the front rear spring hangers..off that one..

I hate to cut them off this good frame..unless someone dont need the frame..

rear 2 /rear hangers,front all 4 hangers..$125 shipped..these were off a 72 4x4 blazer frame 1/2

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

cut them off? i want the bolt on hangers in the rear and the bolt on shackles in the front.

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

ttt

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

Any pics of the frame if you didn't cut the spring mounts off.

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

I did not cut the nice 4x4 blazer frame..I will have pics later today when the rain/snow stops.

Its still a rolling chassis only thing is the rear guts are gone. and the front 4.56 gears are blown.

still has the lift on it..$500 for the frame..4 inch lift and all..

I also have a set of 4 stock 72 blazer 4x4 springs off another frame.

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

Do you have any body mount brackets?

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

I do have some body mounts off another 72 blazer frame here. Pics will be up tomorrow..I need to move the frame out of in front of my shop anyway..I will get pics then.

I will also list some other stuff also.Thanks

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

Where you able to get the pics?

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

I will have pics tomorrow..I was pulling a motor out today and just ran out of daylight to get the pics.. I hate short days..:lol:

Not enough time to get it all done.

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

I need the front cross member is that for sale?

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

hello I am looking possibly, for a transfer case cross member for the 69-72 era trucks for the NP205 transfer case. I am swapping out a Rockwell transfer case. Anyone know it the Rockwell Transfer Case Crossmember will work with the NP205?

Thanks

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

Also it will be for a 4 Speed Tranny too, if there is any difference?

Thanks

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

the 4x4 crossmember are the same mounting as the 205 just the case bracket to frame is different

I have another trans crossmember out of a 72 blazer 4x4 frame also

I want to keep this frame complete for now..as someone may need it as a whole thing.

I am sorry about the pic delay..just been very very busy here rebuilding motors.

Re: Bare 4x4 blazer/jimmy frame $250 east tn
 

how much do you want for the other crossmember? also looking for a shifter for the NP205? and a front driveshaft for the same 4speed Np205 combo. if you have it let me know. would probably make the trip to get it verses shipping, to make it easier foy you.

thanks Ryan